AJAZZ AK820 PRO ISO-DE

Contents

AJAZZ AK820 PRO ISO-DE Mechanical Keyboard User Manual

Model: AK820 PRO ISO-DE

Brand: AJAZZ

1. Introduction

The AJAZZ AK820 PRO ISO-DE is a 75% QWERTZ German Layout Mechanical Keyboard designed for versatility and efficiency. It features three connection modes (Bluetooth, 2.4 GHz wireless, and USB-C wired), a customizable TFT screen, N-Key Rollover (NKRO), and vibrant RGB lighting. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard.

AJAZZ AK820 PRO ISO-DE Mechanical Keyboard front view with RGB lighting

AJAZZ AK820 PRO ISO-DE Mechanical Keyboard with RGB lighting.

2. Package Contents

Please check the box for the following items:

  • AJAZZ AK820 PRO ISO-DE Mechanical Keyboard
  • Keycap Puller
  • Switch Puller
  • USB-C Cable
  • User Manual (this document)
Package contents including keyboard, keycap puller, switch puller, and USB-C cable

Image showing the keyboard and its included accessories.

Video demonstrating the unboxing and typing sound of the keyboard.

3. Specifications

FeatureDescription
BrandEpomaker x AJAZZ
ModelAK820 PRO ISO-DE
Number of Keys82 Keys + 1 Knob + 1 TFT Screen
Layout75% ISO-DE QWERTZ German Layout
Case MaterialABS Plastic
Mounting StyleGasket
Plate MaterialPC
StabilizerPlate-mounted stabilizer
Anti-GhostingNKRO (N-Key Rollover)
PCBHot-swappable for 3pin/5pin switches
ConnectivityType-C/Bluetooth/2.4Ghz Tri-Modes Wireless
LEDsSouth-facing RGB
Polling Rate1000Hz (Wired & 2.4G), 125Hz (Bluetooth)
Battery4000mAh
OS CompatibilityWindows/Mac/Android
DimensionsApprox. 327mm (L) × 136mm (W) × 40mm (H)
WeightApprox. 0.8kg
Keycap MaterialPBT plastic
Keycap ProfileCherry
Sound Attenuation5 layers (Poron sandwich pad, IXPE switch pad, PET sound enhancement pad, floor foam fabric, floor silicone)

AJAZZ Gift Switch Specifications (Linear)

  • Switch Type: Linear
  • Total Travel: 2.0 ± 0.4mm
  • Pre-Travel: 3.6 ± 0.2mm
  • Actuation Force: 45 ± 8 GF
  • Bottom-out Force: 60 ± 8 GF
Diagram showing 75% QWERTZ ISO-DE Layout with dimensions

Diagram illustrating the 75% QWERTZ ISO-DE layout and keyboard dimensions.

Exploded view diagram of the Gasket-Mount structure with numbered components

Detailed diagram of the Gasket-Mount structure, highlighting its various layers for sound dampening and typing feel.

4. Setup and Connection

The keyboard supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. A switch on the back of the keyboard allows you to select the desired mode.

Back of the keyboard showing the BT, USB, and 2.4G switches

Rear view of the keyboard with connectivity switches.

4.1. Wired Connection

  1. Toggle the connectivity switch on the back of the keyboard to the USB position.
  2. Plug the USB-C cable into the keyboard's Type-C port and the other end into your computer.
  3. The keyboard is connected when the backlight and screen turn on.

4.2. 2.4G Wireless Connection

  1. Toggle the connectivity switch on the back of the keyboard to the 2.4G position.
  2. The 'R' key indicator will blink, and the screen will show "2.4G Linking".
  3. Insert the 2.4Ghz receiver into a USB port on your computer.
  4. The connection is established when the indicator stops blinking and the screen shows "Connected".

Note: To re-pair the 2.4Ghz receiver, long press Fn+R until the light indicator flashes quickly. The keyboard is then ready for re-pairing.

4.3. Bluetooth Connection

  1. Toggle the connectivity switch on the back of the keyboard to the BT position.
  2. Press and hold Fn+Q, Fn+W, or Fn+E until the indicator flashes quickly and the screen shows "BT1/2/3 Pairing". This indicates the keyboard is in pairing mode for Bluetooth device 1, 2, or 3 respectively.
  3. On your Bluetooth device (computer, tablet, smartphone), open Bluetooth settings and search for "AK820 5.1-1/2/3". Select it to connect.
  4. The keyboard is connected when the light indicator stops flashing and the screen shows "Connected".
  5. To switch between paired Bluetooth devices (1, 2, or 3), short press Fn+Q, Fn+W, or Fn+E.
Image showing multi-device compatibility for Windows, Mac, Android, Tablets, Laptops, PC, Smartphone

The keyboard supports various operating systems and devices.

5. Operating Instructions

5.1. Function Key Combinations

CombinationFunctionWindows KeyMac Key
F1Screen Brightness -F1F1
F2Screen Brightness +F2F2
F3Mission ControlF3F3
F4LaunchpadF4F4
F5Backlight Brightness -F5F5
F6Backlight Brightness +F6F6
F7Previous TrackF7F7
F8Play/PauseF8F8
F9Next TrackF9F9
F10MuteF10F10
F11Volume -F11F11
F12Volume +F12F12
Fn+F1Media PlayerF1F1
Fn+F2Volume -F2F2
Fn+F3Volume +F3F3
Fn+F4MuteF4F4
Fn+F5StopF5F5
Fn+F6Previous TrackF6F6
Fn+F7Play/PauseF7F7
Fn+F8Next TrackF8F8
Fn+F9MailF9F9
Fn+F10BrowserF10F10
Fn+F11FolderF11F11
Fn+F12CalculatorF12F12
Fn+SpaceRestore Factory Setting
Fn+QHold to connect to Bluetooth Device 1 / Press to toggle to Bluetooth Device 1
Fn+WHold to connect to Bluetooth Device 2 / Press to toggle to Bluetooth Device 2
Fn+EHold to connect to Bluetooth Device 3 / Press to toggle to Bluetooth Device 3
Fn+RHold to rematch the 2.4Ghz Receiver
Fn+KnobToggle Knob Function (Volume Control to Screen Control)
Fn+WinLock/Unlock Windows key (Windows Only)
Fn+Bild ↑ (PrtSc)Print Screen
Fn+Bild ↓ (Pause)Pause

5.2. Screen Control (TFT Display)

The rotary knob can be used to control the screen. When the knob status is set to screen control:

  1. Rotate the knob to navigate and select options on the screen.
  2. Press the knob to confirm your selection.

Screen Functions:

  • Fn+Entf (FN+ENTF): Toggle Animation On/Off
  • Fn+Ende (FN+ENDE): Toggle Screen On/Off

The screen displays various information:

  1. Date Display
  2. Power Display (Battery Icon)
  3. Time Display
  4. OS Display (Operating System)
  5. Connection Mode Display (Wired, BT1/2/3, 2.4G)
  6. Win Lock Indicator
  7. Caps Lock Indicator
  8. Num Lock Indicator
TFT screen displaying desktop info, DIY GIF, backlight custom, volume/language settings

TFT screen interface showing various settings and information.

TFT screen displaying volume, brightness, color, and language settings

Customization options for volume, brightness, color, and language via the TFT screen.

5.3. Light Control (Backlight)

  • Fn+X: Turn On/Off Backlight
  • Fn+#' (FN+\): Toggle Backlight Effect
  • Fn+↑ (FN+UP): Increase Backlight Brightness
  • Fn+↓ (FN+DOWN): Decrease Backlight Brightness
  • Fn+← (FN+LEFT): Toggle Backlight Effect Direction
  • Fn+→ (FN+RIGHT): Toggle Backlight Color
  • Fn+B?\ (FN+<): Decrease Backlight Effect Speed
  • Fn+^ (FN+>): Increase Backlight Effect Speed
Image showing key combinations for customizable dynamic backlight

Key combinations for customizing the dynamic backlight.

5.4. Light Recording Mode

You can customize three sets of game lighting effects. All white lights are preset.

  • FN+1!: Default FPS mode (W/A/S/D/↑↓←→ lit)
  • FN+2": Default LoL mode (Q/W/E/R/D/G/F/B/V/L-Ctrl/L-Alt/Tab/Space/1-6/Esc lit)
  • FN+3§: Default 37-key office mode (A-Z 26 English letters/[/]/;/'/,/.///↑↓←→ lit)

To Record/Save Lighting Mode:

  • Press Fn+~ to enter recording mode for the selected game mode.
  • During recording, press the knob once to select a color (8 colors total).
  • Press Fn+~ again to save the lighting mode.

To Clear Light Recording:

  • Press Fn+~ to enter recording mode, then press Fn+~ again without selecting any keys to reset and clear the recording.

5.5. Sleep Mode / Low Power State

The keyboard has different power-saving states to conserve battery life.

5.5.1. Sleep Mode

  • Power-saving sleep: The backlight will turn off after 5 minutes of no keypress. Press any button to wake up the backlight and reconnect to Bluetooth/2.4G.
  • Deep sleep: After 30 minutes of no keypress, the wireless connection will disconnect, and the keyboard will enter deep sleep. Press any key to wake up the backlight and reconnect to Bluetooth/2.4G.

5.5.2. Low Power State Indicators

  • Low power: The battery icon on the screen displays zero grids, and indicator 3 flashes red.
  • Charging: The battery icon on the screen displays five grids, and a lightning bolt icon appears. Indicator 3 is always red when charging.
  • Fully charged: The battery icon on the screen displays five grids, and indicator 3 is always on.

5.6. Light Indicators

  • Indicator light "C": Caps Lock is on.
  • Indicator light "W": Windows Key is locked (deactivated).
  • Indicator light "⚡": Low Voltage Indicator.

6. Maintenance

6.1. Replacing Keycaps and Switches

The AK820 PRO ISO-DE keyboard features hot-swappable switches, allowing you to easily change them without soldering. Always ensure the keyboard is disconnected before performing maintenance.

For a complete guide on how to remove keycaps and switches, please refer to the online guide: epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches

Tools Required:

  • Keycap Puller
  • Switch Puller
Keycap puller and switch puller tools

Keycap and switch puller tools.

Removing Switches:

  1. Use the switch puller to grip the switch. Align the gripping teeth vertically (on the Y-Axis) at the center of the switch.
  2. Apply pressure until the switch releases itself from the plate.
  3. Using firm but gentle force, pull the switch away from the keyboard with a vertical motion.
Diagram showing how to remove a mechanical switch using a switch puller

Diagram illustrating the switch removal process.

Installing Switches:

  1. Ensure all metallic pins of the new switch are perfectly straight and clean.
  2. Align the switch vertically, ensuring the Gateron logo faces north. The pins should align with the keyboard PCB.
  3. Press the switch down until you hear a click, indicating the switch clips have attached to the keyboard plate.
  4. Inspect the switch to ensure it's properly attached and test it.

Important: If a key doesn't work, you may have bent one of the switch pins during installation. Remove the switch and repeat the process. Never apply excessive force when replacing keycaps or switches, as pins can be damaged beyond repair. If you encounter difficulties, contact customer service to avoid damaging the keyboard.

7. Troubleshooting

  • Key not working after switch installation: This often indicates a bent pin on the switch. Carefully remove the switch, straighten any bent pins, and re-install.
  • Connectivity issues (2.4G/Bluetooth): Ensure the connectivity switch on the back of the keyboard is in the correct position. For 2.4G, ensure the receiver is properly inserted. For Bluetooth, ensure the keyboard is in pairing mode (Fn+Q/W/E held down) and your device's Bluetooth is on.
  • Software/Web App not detecting keyboard: The web-based customization software may have compatibility issues with certain browsers (e.g., Firefox). It is recommended to use a Chrome-based browser (like Google Chrome or Microsoft Edge) for optimal functionality, as these browsers integrate the WebHID protocol necessary for keyboard detection.
  • TFT screen not displaying correctly: Check the keyboard's power status. If the battery is low, charge the keyboard. Ensure the screen is not turned off (Fn+Ende).
  • Backlight not working: Ensure the backlight is turned on (Fn+X). Check backlight brightness (Fn+↑/↓).

8. User Tips

  • "Gift Switches" are highly rated: Many users praise the included "Gift Switches" for their sound and feel, especially in the ISO-DE version.
  • Consider replacing keycaps for better RGB shine-through: If you desire more prominent RGB lighting effects, some users recommend replacing the original keycaps with semi-transparent, side-printed keycaps.
  • Web-based software requires specific browsers: The keyboard's customization software is web-based. For best results and keyboard detection, use a Chrome-based browser (e.g., Google Chrome, Microsoft Edge) instead of Firefox.
  • Great for modding: The hot-swappable design makes this keyboard an excellent entry-level option for enthusiasts looking to customize switches and keycaps.
  • Solid build quality: Despite a plastic casing, the keyboard feels premium and solid, providing a pleasant typing experience.

9. Warranty and Technical Support

9.1. Technical Assistance

For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. Responses are typically provided within 24 hours.

If you purchased your keyboard from a distributor or a non-official Epomaker store, please contact them directly for support.

9.2. Warranty

EPOMAKER's warranty covers factory defects that may affect the proper functionality of your purchase. It does not cover damage resulting from normal wear and tear.

If your product is defective, a replacement unit will be provided. You may be required to return the defective unit to Epomaker.

A 1-year warranty is provided for products purchased directly from the EPOMAKER website (EPOMAKER.com).

Your warranty will be void if inspection reveals any modification or changes unsupported by the original product, including:

  • Changing internal components.
  • Assembling and reassembling the product.
  • Replacing batteries (unless specified as user-replaceable).

Warranty coverage is only valid for items purchased from official EPOMAKER stores. If purchased from another reseller, please contact that reseller for problem resolution.

10. Statement of Compliance

Disclaimer: Images and product information on this page may be automatically translated by AI. These translations are provided on an "as is" basis and for convenience only, and may contain inaccuracies or inconsistencies. No guarantees are made, and no liability is assumed, for the accuracy, reliability, or completeness of the translated content or the AI translation feature. If you have any questions or need to confirm product details, please refer to the original version or contact Customer Service.

This product complies with relevant CE and RoHS directives.

WARNING: Choking Hazard - Small Parts. Keep away from children and pets.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.