Opel CHJ-003A

Contents

Opel Car Seat Belt Shoulder Pad User Manual

Model: CHJ-003A

1. Product Overview

The Opel Car Seat Belt Shoulder Pad is designed to enhance comfort and relieve pressure on the neck and shoulder area caused by seat belts. Made from high-quality leather and carbon fiber, it offers a soft, smooth, and durable solution for a more comfortable driving experience.

Opel Car Seat Belt Shoulder Pad in black, highlighting its design and purpose to relieve neck and shoulder constraints.

Figure 1: Opel Car Seat Belt Shoulder Pad (Black)

Video 1: Product demonstration of the seat belt shoulder pad.

2. Safety & Warnings

  • Read all instructions thoroughly before using the product.
  • Keep the product out of reach of children under 3 years old.
  • Children should only use this product under adult supervision.
  • Do not use this product for any purpose other than its intended use as a seat belt shoulder pad.
  • Always inspect the product for any damage before each use. Do not use if damaged.
  • Follow all installation and operation guidelines to prevent injury.
  • Avoid prolonged exposure to water or moisture.
  • Handle with care to prevent cuts or injuries, especially during installation or removal.

3. Setup & Installation

Follow these steps to properly install your seat belt shoulder pad:

  1. Before First Use: Remove any protective films from the product.
  2. Open the Pad: Open the shoulder protection pad by separating the Velcro fasteners.
  3. Position on Seat Belt: Wrap the open pad around the shoulder strap of your car's seat belt.
  4. Adjust and Secure: Adjust the position of the shoulder pad to align it comfortably with your shoulder area. Tighten the Velcro fasteners firmly to ensure it is securely bonded and does not slide or shift during use.
Diagram showing the front and back of the seat belt pad and three steps for installation on a car seat belt.

Figure 2: Product Installation Steps

Close-up image detailing the Velcro installation mechanism of the seat belt pad.

Figure 3: Detailed Velcro Installation

4. Operating Instructions

Once installed, the seat belt shoulder pad will effectively protect your shoulder and relieve pressure. It helps to reposition the seat belt for a more secure and comfortable fit, preventing the belt from digging into your neck or face.

Comparison image showing a person without a shoulder pad (before) and with a shoulder pad (after) for improved comfort.

Figure 4: Before and After Product Use Comparison

Black seat belt shoulder pad installed in a car, providing comfort.

Figure 5: Black Seat Belt Shoulder Pad in Use

5. Maintenance

To ensure the longevity and hygiene of your seat belt shoulder pad, follow these maintenance guidelines:

  • The pad is 100% washable. It is designed to be easy to clean without fading, shrinking, or distortion.
  • For cleaning, gently hand wash with mild soap and water.
  • Allow the pad to air dry completely before re-installing it in your vehicle.
  • Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
  • Do not machine wash or tumble dry, as this may affect the shape and integrity of the pad.

6. Troubleshooting

  • Pad slides or shifts: Ensure the Velcro fasteners are tightly secured around the seat belt strap. Re-adjust the position and re-fasten the Velcro firmly.
  • Discomfort after installation: Re-adjust the position of the pad on the seat belt to find the most comfortable placement for your shoulder.
  • Product appears damaged: If the product shows signs of wear, tear, or damage, discontinue use immediately and replace it.

7. Specifications

Product parameters diagram showing dimensions (7cm width, 23cm length) and a table of specifications.

Figure 6: Product Dimensions and Specifications

Attribute Detail
Product Name Seat Belt Shoulder Protection (Splicing shoulder protection)
Model CHJ-003A
Material Quality Leather + Carbon Fiber
Product Weight 43g
Dimensions (Approx.) 23 cm (9.1 inches) Length x 7 cm (2.6 inches) Width
Product Features Relieves neck and shoulder pressure, crash tested for safety, washable
Origin Mainland China
Batch/Serial Number 20260206596

8. User Tips

  • For optimal comfort, ensure the pad is positioned directly over your shoulder, preventing the seat belt from rubbing against your neck.
  • The high-quality leather and carbon fiber materials are designed for durability and comfort.
  • Consider purchasing multiple pads for all seat belts in your vehicle that are frequently used.
  • The rigorous workmanship and fine stitching ensure the pad is wear-resistant and long-lasting.
  • Multiple color options are available to match your car's interior.
Image showing multiple color options for the seat belt shoulder pad and one installed in a car.

Figure 7: Available Colors and Aesthetic Integration

9. Warranty & Support

For any inquiries or support regarding your Opel Car Seat Belt Shoulder Pad, please contact the manufacturer or their authorized representative:

Manufacturer Information:

  • Company Name: Yiwu Youlian E-commerce Co., Ltd
  • Address: Room 302, No. 386 Chemical Road, Choucheng Street, Yiwu City, Jinhua City, Zhejiang Province, China
  • Email: lum1913@163.com

EU Authorized Representative:

  • AR Company Name: MJCM SARL
  • Address: 78 avenue des Champs Elysees Bureau 326 Paris Ile-de-France
  • Email: mjcm190928@gmail.com

For detailed warranty terms and conditions, please refer to the official user manual PDF available at https://manuals.plus/m/95fe0f9f3b8e90d1c648bcda7718e6986c3c1f6fcfbe4c6cb1c09db7aff6caed.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.