NEWBOLER Outdoor Sports Hydration Bag

Contents

NEWBOLER Outdoor Sports Hydration Bag Instruction Manual

Models: 1L, 1.5L, 2L, 3L

Product Overview

The NEWBOLER Outdoor Sports Hydration Bag is designed for convenient hydration during various outdoor activities such as cycling, running, hiking, and camping. It features a durable, food-grade PEVA material bladder with a leak-proof hose and bite valve, available in multiple capacities.

Green 3L hydration bladder with hose and bite valve
Image: NEWBOLER 3L Hydration Bladder (Green)
Hydration bladder in use during various outdoor activities
Image: Hydration bladder used for cross-country running, cycling, hiking, and camping.

Warning: This product contains Urethane (Ethyl carbamate), a chemical known to the State of California to cause developmental toxicity and cancer. For more information go to www.P65Warnings.ca.gov.

Setup Instructions

  1. Filling the Bladder

    Open the sealing clamp at the top of the bladder. Fill with water. The wide opening allows for easy filling and the addition of ice cubes.

    Instructions for filling the hydration bladder with water and ice cubes
    Image: Easy filling with water and ice cubes.

    Ensure the sealing clamp is securely closed after filling to prevent leaks.

  2. Connecting the Hose

    The hose features a leak-proof connection interface. Ensure the water pipe connecting sealing ring is properly seated before screwing the hose into the bladder's outlet valve. The screw-in design ensures a secure and leak-free connection.

    Close-up of the leakproof connection interface and water pipe sealing ring
    Image: Leakproof connection interface with sealing ring.
  3. Mouthpiece Details

    The silicone nozzle is equipped with a dust cap for hygiene. Remove the dust cap before use.

    Detailed view of the silicone soft nozzle with dust cap and core
    Image: Silicone soft nozzle details, showing dust cap and nozzle core.

Operating Instructions

Valve Usage Instructions:

  1. Gently bite the tip of the valve with your front teeth to initiate water flow.
  2. Decrease bite pressure to stop water flow.
  3. For best results, DO NOT bite hard or chew on the valve.
  4. Replace the cap when not in use to keep the mouthpiece clean.
Instructions for the leak-proof outlet, demonstrating how to press water out and the lock/unlock mechanism
Image: Leak-proof outlet operation: Push down to lock, push up to unlock.

The bite valve features a lock mechanism. Push down to lock the valve and prevent accidental leaks. Push up to unlock and allow water flow.

Maintenance and Care

Cleaning Instructions:

  1. Clean the bladder, hose, and bite valve assembly with mild detergent and thoroughly rinse with water.
  2. For thorough cleaning, the hose can be quickly disconnected and disassembled by rotating the screw-in connection.
  3. Image demonstrating quick connection and disassembly of the hose for easy cleaning
    Image: Quick connection and disassembly of the hose for easy cleaning.
  4. Make sure the bladder is completely dry both inside and out before storing. Storing the bladder in an open position is preferred to allow air circulation.
  5. The hanging hole under the water bag is convenient for hanging upside down to dry after use.
  6. Image showing the hydration bladder being hung upside down for drying
    Image: Super convenient water bag hole for hanging upside down to dry.
  7. Avoid contact with chemicals and UV light, as these elements will damage the bladder material.
  8. Keep the bladder away from sharp objects to avoid puncture.

Troubleshooting

  • Leakage: Ensure all connections (hose to bladder, bite valve to hose) are securely tightened. Check the sealing clamp at the top of the bladder is fully closed. Inspect the bladder and hose for any punctures or tears.
  • No Water Flow: Ensure the bite valve is unlocked (pushed up). Check if the hose is kinked or blocked. Make sure there is water in the bladder.
  • Unpleasant Taste: Thoroughly clean the bladder and hose with mild detergent and rinse multiple times. Ensure complete drying after cleaning.

Specifications

Feature Detail
Brand NEWBOLER
Material PEVA Food-Grade
Capacities Available 1L, 1.5L, 2L, 3L
Hose Length 107 cm (42.13 in)
Temperature Range -20°C to +50°C
Food Contact Yes
High-Concerned Chemical Urethane (Ethyl carbamate)

Dimensions:

Product size chart for 3L, 2L, and 1.5L bladders
Image: Product size chart for different capacities.
  • 3L Bladder: Approximately 19.5 cm (7.68 in) width x 42.5 cm (16.73 in) height
  • 2L Bladder: Approximately 17.5 cm (6.9 in) width x 42.5 cm (16.73 in) height
  • 1.5L Bladder: Approximately 17.5 cm (6.9 in) width x 36.5 cm (14.37 in) height

User Tips

Based on general user feedback for hydration bladders:

  • For optimal taste, rinse the bladder and hose thoroughly with warm water and a small amount of baking soda or lemon juice before first use.
  • Always ensure the bite valve is locked when not actively drinking to prevent accidental leaks, especially when placed in a backpack.
  • When storing, ensure the bladder is completely dry to prevent mold or mildew growth. Using a bladder drying rack or hanging it upside down with the opening propped open can help.
  • Avoid filling the bladder with sugary drinks, milk, or juice, as these can be difficult to clean and may promote bacterial growth. If used, clean immediately and thoroughly.

Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF provided by the manufacturer. This document contains additional guides and information.

A digital version of the user manual (PDF) is available for download. Please consult the seller's product page or contact customer support for the direct link.

© 2023 NEWBOLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.