SHOVIA H4 Bi LED Projector Lens Headlight Bulbs

Contents

SHOVIA H4 Bi LED Projector Lens Auto Headlight Bulbs User Manual

Model: H4 Bi LED Projector Lens Headlight Bulbs

Brand: SHOVIA

1. Introduction

Thank you for choosing SHOVIA H4 Bi LED Projector Lens Auto Headlight Bulbs. These high-performance headlight bulbs are designed to provide superior illumination for your vehicle, featuring a bi-projector lens for both high and low beam functions, super bright CSP chips, and a turbo fan for efficient cooling. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new headlights.

H4 Bi LED Projector Lens Headlight Bulbs

Image 1: SHOVIA H4 Bi LED Projector Lens Headlight Bulbs with Dual Lens design, 1,000,000LM, 800W, and Super Bright CSP Chips.

2. Safety Information

  • Always wear safety glasses and gloves when handling automotive electrical components.
  • Ensure the vehicle's engine is off and the battery is disconnected before installation to prevent electrical shock or damage.
  • Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
  • Keep the product away from water and moisture during storage and installation.
  • If you are unsure about any installation steps, consult a qualified automotive technician.

3. Package Contents

Please check the package for the following items:

  • SHOVIA H4 Bi LED Projector Lens Headlight Bulb(s) (1 or 2 PCS, depending on your order)
  • Integrated driver/CANBUS module
  • Mounting accessories (metal spring, screws)
Single H4 Bi LED Projector Lens Headlight Bulb

Image 2: A single SHOVIA H4 Bi LED Projector Lens Headlight Bulb.

4. Specifications

AttributeValue
Brand NameSHOVIA
Item TypeOther (Headlight Bulbs)
Wattage800W
Luminous Flux1,000,000LM
Color Temperature6000K
Voltage12 V
Car Model CompatibilityUniversal, Double beam H4 Cars
Operating Temperature-45°C to 150°C (-49°F to 302°F)
Lifespan50,000 Hours (LED source)
Waterproof RatingIP68
CertificationCE
OriginMainland China
Upgrade Chips and Performance Metrics

Image 3: Illustration of upgraded 3570 CSP chips, showing +800% brightness and lifespan compared to original, with 800W real power and 1,000,000LM luminous flux.

Product Dimensions and Lens Design

Image 4: Product dimensions (123mm length, 35.4mm width, 33.18mm height) and comparison of lens design to a traditional halogen lamp, highlighting the clear light type.

5. Installation Guide

Follow these steps to install your SHOVIA H4 Bi LED Projector Lens Headlight Bulbs:

  1. Open the Dust Cover: Locate and open the dust cover of your vehicle's headlight assembly.
  2. Remove Halogen Bulb: Unplug the power cord from the existing halogen bulb and carefully remove the old bulb.
  3. Replace the Light: Insert the new SHOVIA H4 Bi LED Projector Lens Headlight Bulb into the headlight housing.
  4. Fasten Metal Spring: Secure the new LED bulb by fastening the metal spring or retaining clip to the product, ensuring it is firmly seated.
  5. High Beam Fine-Tuning: The screws on the accessory kits can be tightened to fine-tune the high beam and low beam.
  6. Overall Light Pattern Adjustment: The overall light pattern can be adjusted left and right by tightening the screws in the accessory kit. This allows for precise alignment for both Left-Hand Drive (LHD) and Right-Hand Drive (RHD) vehicles.
H4 LED Bi-Projector Lens Beam Performance

Image 5: Visual representation of low beam and high beam performance from the H4 LED Bi-Projector Lens.

Low Beam Cutting Line and High Beam Focus

Image 6: Demonstrates the perfect low beam cutting line and the strongly focused high beam, reaching up to 800m.

Left-Hand Drive and Right-Hand Drive Beam Patterns

Image 7: Comparison of beam patterns for Left-Hand Drive (steering wheel on left) and Right-Hand Drive (steering wheel on right) vehicles, showing proper light distribution.

Video 1: Product demonstration showing the physical product and its light output in various conditions, including low and high beam functionality.

6. Operation

Once installed, the SHOVIA H4 Bi LED Projector Lens Headlight Bulbs operate like standard H4 headlights. The bi-projector lens design ensures that both low and high beams are projected through the lens, providing a clear and focused light pattern.

  • Low Beam: Provides a wide, even spread of light with a sharp cutoff to prevent dazzling oncoming drivers.
  • High Beam: Offers a more concentrated and powerful beam for maximum visibility at longer distances.

Switch between low and high beams using your vehicle's standard headlight control.

7. Maintenance

  • Cleaning: Periodically clean the outer surface of the headlight lens with a soft, damp cloth. Avoid abrasive cleaners that could scratch the lens.
  • Inspection: Regularly check the headlight bulbs for any signs of damage or loose connections.
  • Cooling: Ensure that the turbo fan at the rear of the bulb is not obstructed, as proper airflow is crucial for heat dissipation and maintaining the LED's lifespan.
  • Replacement: With a lifespan of 50,000 hours, these LED bulbs are designed for long-term use. If replacement is necessary, follow the installation steps in reverse.

8. Troubleshooting

ProblemPossible CauseSolution
Headlight not turning onLoose connection, blown fuse, incorrect wiring.Check all connections, inspect vehicle fuses, verify wiring according to vehicle manual.
Flickering or intermittent lightLoose connection, CANBUS incompatibility (rare with integrated CANBUS), voltage fluctuations.Ensure connections are secure. If flickering persists, consult a technician to check vehicle's electrical system.
Improper beam pattern (too high/low, scattered)Incorrect installation angle, improper adjustment.Re-seat the bulb correctly. Use the fine-tuning screws to adjust the beam pattern as described in the installation section.
Fan noiseNormal operation, obstruction.A slight fan noise is normal for active cooling. Ensure no debris is obstructing the fan.

9. User Tips

  • Many users appreciate the clear and focused light output. Ensure proper alignment during installation to maximize this benefit.
  • The bi-projector lens design means both low and high beams are emitted through the lens, providing a consistent and effective light pattern.
  • While the product boasts a long lifespan, regular checks of the fan and connections can help ensure its durability.

10. Frequently Asked Questions

Q: Does the low and high beam light come out of the projector lens?
A: Yes, the SHOVIA H4 Bi LED Projector Lens Headlight Bulbs are designed with a bi-projector lens, meaning both the low beam and high beam functions are projected through the same lens for optimal light distribution and a sharp cutoff.

11. Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the SHOVIA customer service directly. Keep your purchase receipt as proof of purchase.

For additional information and documents, you may refer to the official user manual PDF: User manual (PDF)

© 2024 SHOVIA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.