RESUXI MY-101

Contents

RESUXI MY-101 Electric Foot File & Callus Remover Instruction Manual

Professional Pedicure and Manicure Tool

1. Product Overview

The RESUXI MY-101 is a versatile 2-in-1 electric device designed for professional foot care and nail care. It effectively removes dead skin and calluses from feet and can also be used for manicures. Featuring a powerful motor, adjustable speeds, and a rechargeable battery, it offers a convenient and efficient solution for personal grooming.

RESUXI MY-101 Electric Foot File and Callus Remover with accessories

Figure 1: RESUXI MY-101 Electric Foot File and Callus Remover with included accessories (device, USB cable, foot exfoliation discs, nail grinding discs).

2. Package Contents

  • 1 x RESUXI MY-101 Electric Foot File Device
  • 1 x USB Charging Cable
  • 60 x Foot Exfoliation Discs (replaceable sandpaper)
  • 10 x Nail Grinding Discs (replaceable sandpaper)
  • 1 x Wrench for changing attachments

3. Setup and Charging

3.1 Initial Charging

Before first use, fully charge the device. Connect the USB charging cable to the charging port on the device and plug the other end into a suitable USB power adapter (not included). The LED display will indicate the battery level. A full charge takes approximately 2 hours.

3.2 Attaching Discs

The device supports two types of attachments: a larger disc for foot care and a smaller cylindrical disc for nail care. Both use replaceable sandpaper discs.

  1. For Foot Care: Unscrew the top cap of the device. Peel off the protective backing from a new foot exfoliation disc and firmly attach it to the flat metal plate. Screw the top cap back onto the device.
  2. For Nail Care: Use the provided wrench to loosen the screw on the top attachment. Remove the foot care plate. Insert the nail grinding attachment (cylindrical holder) and secure it by tightening the screw with the wrench. Then, slide a nail grinding disc onto the cylindrical holder.

Video 1: Product demonstration showing how to attach foot and nail care discs, power on, adjust speed, and use the device.

4. Operating Instructions

4.1 Power On/Off

  • To turn on the device, long press the power button (located on the side) for 3 seconds.
  • To turn off the device, long press the power button again for 3 seconds.

4.2 Speed Adjustment

The device features 12 adjustable speeds, with a maximum speed of 1200 RPM. Once powered on, short press the power button to cycle through the speed settings. The current RPM gear will be displayed on the LED screen.

Device showing 19 speeds to soothe fatigued skin

Figure 2: The device offers multiple speed settings for various skin conditions. (Note: The device features 12 adjustable speeds as shown in the product video).

4.3 Direction of Rotation

To adjust the direction of rotation, press and hold the bottom button for 1 second while the device is operating.

4.4 Usage for Foot Care

  1. Ensure the foot exfoliation disc is securely attached.
  2. Select a suitable speed. Start with a lower speed for sensitive areas or daily care, and increase for tougher calluses.
  3. Gently move the device over the dry, hardened skin on your feet. Do not apply excessive pressure.
  4. Continue until the desired smoothness is achieved. Avoid using on broken or irritated skin.
Electric foot file removing dead skin from heel

Figure 3: Using the electric foot file to remove dead skin and calluses for smooth feet.

Different speed applications for foot care

Figure 4: Gentle, low-speed for daily care and uniform speed for mild dead skin removal.

4.5 Usage for Nail Care

  1. Ensure the nail grinding disc is securely attached.
  2. Select a low speed setting.
  3. Gently shape and smooth uneven nails. Be careful not to over-grind.
Electric foot file used for both feet and manicures

Figure 5: The device is suitable for both grinding feet and performing manicures.

5. Maintenance

5.1 Cleaning the Device

  • After each use, turn off the device and remove the sandpaper disc.
  • Use a small brush (not included) to gently brush away any skin debris from the attachment head.
  • Wipe the main body of the device with a dry or slightly damp cloth. Do not rinse the device under water.

5.2 Replacing Sandpaper Discs

For optimal performance and hygiene, replace the sandpaper discs regularly. When a disc becomes worn or less effective, simply peel it off and replace it with a new one as described in Section 3.2.

6. Troubleshooting

  • Device does not turn on: Ensure the device is fully charged. Long press the power button for 3 seconds.
  • Device stops during use: The battery might be low. Recharge the device. If it stops due to excessive pressure, reduce pressure and restart.
  • Reduced effectiveness: The sandpaper disc may be worn out. Replace it with a new one.
  • Unusual noise or vibration: Ensure the attachment is securely fastened. If the issue persists, discontinue use and contact support.

7. Specifications

FeatureSpecification
BrandRESUXI
Model NumberMY-101
Power TypeRechargeable (Battery)
VoltageGlobal Universal (100-240V)
MaterialABS
Charging Time2 Hours
Usage Time160 Minutes
Battery Capacity2000 mAh
Adjustable Speeds12 (Max 1200 RPM)
Package Dimensions24cm (L) x 13cm (W) x 5cm (H)
Package Weight0.373 kg
Large battery, wireless operation

Figure 6: The device features a large capacity battery for extended wireless operation.

8. User Tips

For best results, ensure your feet are dry before using the callus remover. Start with a lower speed and gradually increase as needed. Always move the device gently and avoid staying in one spot for too long to prevent irritation.

9. Warranty and Support

The following guarantees are offered for this product:

  1. The product is manufactured and inspected through strict quality control.
  2. If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair center in accordance with the warranty card. (Batteries and sandpaper discs are consumables and are not included in the warranty and are subject to payment).
  3. Free service will not be provided in the following cases:
    A. Damage caused by unapproved repairs or alterations.
    B. Damage caused by incorrect or negligent use or accident.
    C. Damage caused by natural disasters or voltage anomalies.
    D. Due to neglect of product specifications.

For further assistance, please refer to the official user manual PDF available at Product User Manual (PDF) or contact your retailer.

© 2024 RESUXI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.