1. Introduction
The ESP32-S3 Development Board is a versatile and powerful module featuring a dual-core processor clocked at up to 240MHz. It integrates a 2.8-inch color screen with 240x320 resolution, offering rich colors and wide visibility. Designed for convenient interaction, it supports capacitive touch and includes a Type-C interface for stable power supply and data transfer. The board is equipped with a built-in microphone and supports external speakers for comprehensive audio capabilities, making it ideal for various intelligent display and voice interaction projects.

2. Package Contents
Please check the contents of your package upon arrival. Depending on your selected version (with or without touch), the contents may vary slightly:
For ES3C28P (With Touchscreen):
- ES3C28P-Touch-LCD: 1 unit
- 1.25mm to DuPont 2.54 Terminal Wire 4P 20cm: 1 unit
- USB-TypeC Cable: 1 unit
- Packing Box: 1 unit
- Speaker: 1 unit (Optional)
For ES3N28P (Without Touchscreen):
- ES3N28P-No Touch-LCD: 1 unit
- 1.25mm to DuPont 2.54 Terminal Wire 4P 20cm: 1 unit
- USB-TypeC Cable: 1 unit
- Packing Box: 1 unit
- Speaker: 1 unit (Optional)

3. Setup Guide
3.1. Module Interface Overview
Familiarize yourself with the various ports and buttons on the development board:

- RESET Button: Resets the ESP32-S3 module.
- TYPE-C Port: Used for power supply, program downloads, and serial communication.
- BOOT Button: Used for entering bootloader mode for firmware flashing.
- Battery Port (BAT): Connects to external lithium batteries (3.7V).
- Serial Port (UART): For serial communication with other devices.
- MicroSD Card Slot: For expanded storage using a Micro TF card.
- Speaker Port: Connects to an external speaker for audio output.
- I2C Peripheral Port: For connecting I2C compatible peripherals.
- Expansion Pins: General-purpose input/output (GPIO) pins for connecting various sensors and modules.
- Microphone (MIC): Built-in microphone for audio input.
- RGB LED: Three-color indicator lights for status indications.
3.2. Initial Power-Up
- Connect Power: Use the provided USB-TypeC cable to connect the TYPE-C port on the development board to a 5V USB power source (e.g., computer USB port, USB wall adapter).
- Observe Power Indicator: The board should power on, and the display will light up.
- Optional: External Battery: If using an external 3.7V lithium polymer battery, connect it to the Battery Port (BAT). The board has built-in battery charge management circuitry.

3.3. MicroSD Card Installation (Optional)
Insert a Micro TF card into the MicroSD Card Slot for expanded storage if your application requires it.
3.4. Speaker Connection (Optional)
If your package includes a speaker, connect it to the Speaker Port on the board for audio output.
4. Operating Instructions
4.1. Display and Touchscreen Interaction
The 2.8-inch color screen (240x320 resolution) provides a visual interface. If you have the touchscreen version, you can interact directly with on-screen elements. The display supports up to 262K colors for rich visual feedback.
4.2. Audio Input and Output
The built-in microphone allows for audio input and voice capture. Connect an external speaker to the Speaker Port for audio playback. This functionality is crucial for voice-controlled applications and interactive audio projects.
4.3. Xiaozhi AI Chatbot
The board supports Xiaozhi AI voice chat, enabling intelligent voice interaction. You can connect to AI models, customize multiple roles, and utilize its capabilities for various AI-driven applications. The platform also supports secondary development for advanced customization.

4.4. Multi-Language Support
The development board provides rich multi-language support, making it suitable for global applications and diverse user bases. This feature enhances the usability of voice interaction and display content across different languages.

4.5. Smart Replies and Voice Interaction
Leverage the AI capabilities for smart replies to various questions and commands. The integrated microphone and speaker facilitate seamless voice interaction, allowing users to query information, control functions, and receive spoken responses.

4.6. LVGL GUI Development
The board is well-suited for GUI development using LVGL (Light and Versatile Graphics Library). LVGL is a popular open-source embedded graphics library that allows for creating beautiful user interfaces with graphical elements, visual effects, and a lightweight footprint. Tools like Squareline Studio and Arduino can be used to develop a WYSIWYG (What You See Is What You Get) interface.

5. Maintenance
- Cleaning: Gently wipe the display and board with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Storage: Store the development board in a dry, dust-free environment away from extreme temperatures and direct sunlight.
- Handling: Handle the board by its edges to avoid touching sensitive electronic components.
6. Troubleshooting
- Board Not Powering On: Ensure the USB-TypeC cable is securely connected to a working 5V power source. Check the cable for damage.
- Display Not Lighting Up: Verify power connection. If using an external battery, ensure it is charged and correctly connected.
- No Response from Touchscreen: For touchscreen versions, ensure the display cable is properly seated. If programming, verify that the touch driver is correctly initialized in your code.
- Firmware Upload Issues: Ensure the correct COM port is selected in your IDE. Try holding the BOOT button while pressing and releasing the RESET button to enter bootloader mode before uploading.
- Audio Problems: Check speaker connections. Ensure volume settings are appropriate in your application.
7. Specifications
7.1. General Specifications
| Feature | Description |
|---|---|
| Touchscreen Model | ES3C28P (with touch) |
| Non-Touchscreen Model | ES3N28P (no touch) |
| Power Supply | USB (Type-C) |
| Module | ESP32-S3 |
| CPU | Xtensa LX7 32-bit dual-core processor |
| Frequency | 240MHz (maximum) |
| Storage | 384KB ROM + 512KB SRAM + 16KB RTC SRAM + 16MB external QSPI Flash |
| Wi-Fi | 2.4GHz band, supports 20MHz and 40MHz bandwidths |
| Bluetooth | Bluetooth V4.2 BR/EDR and Bluetooth LE standards |
| Operating Voltage | 3.0-3.6V |

7.2. LCD Screen Specifications
| Feature | Description |
|---|---|
| Screen Size | 2.8 inches |
| Screen Type | IPS TFT |
| Resolution | 240xRGBx320 pixels |
| Active Display Area | 43.20 (W) x 57.60 (H) mm |
| Colors | Maximum: 262K (RGB666); Common: 65K (RGB565) |
| Driver IC | ILI9341V |
| Display Interface | 4-Line SPI (connected to ESP32) |
| Pixel Size | 0.153 (H) x 0.153 (mm) |
| Viewing Angle | ALL 0'CLOCK |
| Backlight Brightness (Typical) | 280 cd/m² |
| Backlight Type | 4 White LEDs |
| Operating Temperature | -30~80 ℃ |
| Storage Temperature | -30~80 ℃ |

7.3. Capacitive Touch Parameters (for ES3C28P)
| Feature | Description |
|---|---|
| Active Area Size | 2.8 inches |
| Touch Screen Type | Capacitive Touch Screen |
| Touch Screen Resolution | 240x320 pixels |
| Driver IC | D-FT6336G |
| Visual Window Size | 45.20 (W) x 59.45 (H) mm |
| Communication Interface | IIC |
| Structural Material | ITO film + ITO glass |
| Operating Temperature | -30~80 ℃ |
| Storage Temperature | -30~80 ℃ |

7.4. Battery Charge and Discharge Parameters
| Feature | Description |
|---|---|
| Charging Voltage Range | 4.2-6.5V (Typical: 5V) |
| Maximum Charging Current | 500mA (Module Actual: 290mA) |
| Saturation Charge Voltage | 4.24V |
| Charging Temperature (Module Actual Max) | 62 ℃ |
| Rechargeable Battery Specification | 3.7V Lithium Polymer Battery |
7.5. Electrical Parameters
| Feature | Description |
|---|---|
| Operating Voltage | 5.0V |
| Backlight Current | 79mA |
| Backlight Brightness (Actual) | With Touchscreen: 230cd/m²; Without Touchscreen: 270cd/m² |
| Total Current (ESP32 Reset) | 0 |
| Total Current (Display Only) | 140mA |
| Total Current (Display, Speaker, Battery Charging All Active) | 560mA |

7.6. Product Dimensions
| Component | Dimensions (W x H x D) |
|---|---|
| LCD Screen (excluding cable/adhesive) | 50.00 ± 0.2 x 69.20 ± 0.2 x 2.3 ± 0.1 mm |
| Touchscreen (excluding cable/adhesive) | 50.00 ± 0.2 x 69.20 ± 0.2 x 1.20 ± 0.1 mm |
| Module (with touchscreen) | 50.00 x 86.00 x 10.60 mm |
| Module (without touchscreen) | 50.00 x 86.00 x 9.10 mm |

8. User Tips
- Explore Sample Programs: The product provides extensive sample programs. Utilizing these can significantly speed up your learning and development process.
- WIKI Updates: Technical support for underlying drivers and online WIKI materials are available. Regularly check for updates to ensure you have the latest information and resources.
9. Warranty and Support
For detailed warranty information, technical support, and further documentation, please refer to the official product page or contact the seller directly. A user manual in PDF format is also available for download, which may contain additional detailed instructions and diagrams: User Manual (PDF).