XTOOL D9S

Contents

XTOOL D9S Professional Automotive Diagnostic Scanner User Manual

Model: D9S Smart Diagnostic System

Version 1.3 | 2025.11

1. Introduction

The XTOOL D9S Smart Diagnostic System, referred to as the "Scan Tool," is an advanced automotive scanning tool based on the Android operating system. It supports multiple languages and is designed for various vehicle makes and models across different regions. This diagnostic scanner offers comprehensive functions and provides accurate diagnostic information efficiently.

The D9S is a professional-level diagnostic scanner with high-end hardware and advanced functions designed to meet various repair needs. It is reliable, faster, smarter, more powerful, and smoother in operation.

Video: XTOOL D9S Professional Automotive Diagnostic Scanner Overview

2. Safety Precautions

For safe operation and to prevent damage to the device or vehicle, please adhere to the following instructions and cautions:

Operation Instructions:

  • Keep the device away from heat or fumes during use.
  • If the vehicle battery contains acid, keep your hands and skin or fire sources away from the battery during testing.
  • Ensure adequate ventilation as vehicle exhaust gas contains harmful chemicals.
  • Avoid touching vehicle cooling system components or exhaust manifolds when the engine is running due to high temperatures.
  • Ensure the car is securely parked, with Neutral selected or the selector in P or N position, to prevent movement when the engine starts.
  • Verify the Diagnostic Link Connector (DLC) is functioning properly before testing to avoid damage to the Diagnostic Computer.
  • Do not switch off power or unplug connectors during testing, as this may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer.

Cautions:

  • Avoid shaking, dropping, or dismantling the scan tool to prevent damage to internal components.
  • Use only fingertips to touch the LCD screen. Hard or sharp objects may damage the screen.
  • Do not use excessive force.
  • Avoid exposing the screen to strong sunlight for prolonged periods.
  • Keep the scan tool away from water and moisture.
  • Store and use the scan tool only within the temperature ranges specified in the Technical Specifications section.
  • Keep the unit away from strong magnetic fields.

3. Package Contents

The XTOOL D9S package includes the following main units and accessories:

  • D9S Tablet
  • VCI Box (Wireless Diagnostic Module: V207 VCI)
  • OBD2-16 Adapter
  • DB15 Main Cable
  • Various OBD2 Adapters (e.g., For Honda-3, For Suzuki-3, For Benz-14, For Toyota-17, For Fiat-3, For BMW-20, For Hyundai/Kia-10, For Kia-20, For Mitsubishi-12+16, For Mazda-17, For Universal-3, For Nissan-14, For Citroen-2, For GM/Daewoo-12, For Benz-38)
  • Battery Cable
  • Type C to A Cable
  • Type C to B Cable
  • Type C to C Cable
  • XTOOL Plastic Box (Tool Case)
XTOOL D9S Full Package List

Image: XTOOL D9S Full Package List, showing the tablet, VCI box, various cables, and OBD adapters.

4. Product Overview

4.1 Main Units: Tablet

The D9S tablet features a 9.7-inch touch screen and runs on Android 10.0. It is equipped with a 4-core 1.5GHz processor, 4GB RAM, 128GB storage, and a 6400mAh 7.3V battery.

  • 9.7-inch touch screen: Main display for interaction.
  • Type-C Port: For charging and wired connection.
  • Power Button: Long press to turn off/on the tablet; short press to enter sleeping mode.
  • Rear Camera: 8 MP rear camera.
  • Nameplate: Product identification.
  • Holder: Integrated stand for convenient viewing.
  • Speaker: For audio output.
XTOOL D9S Tablet Hardware Overview

Image: XTOOL D9S Tablet Hardware Overview, highlighting the 9.7-inch screen, Android 10.0 OS, 4G+128G storage, and 6400mAh battery.

4.2 VCI Box

The VCI (Vehicle Communication Interface) box is the wireless diagnostic module (V207) that connects to the vehicle's OBD-II port.

  • DB15 Port: Connects to the main cable.
  • Display with vehicle voltage: Shows the current vehicle voltage.
  • Type-B Port: For wired connection to the tablet.
  • Reset button: Long press to reset the VCI box.

4.3 OBD2-16 Adapter

  • OBD Male Connector: Plugs into the vehicle's DLC port.
  • DB15 port: Connects to the main cable.

4.4 DB15 Main Cable

  • DB15 Port - to OBD2-16 Adapter: Connects the main cable to the OBD2-16 adapter.
  • DB15 Port - to VCI: Connects the main cable to the VCI box.
  • 12V DC Power Input Port: For external power supply to the VCI box.

5. Setup and Initial Activation

5.1 Connecting Power

The scan tool may need to be charged before first use. Ensure the proper power adapter (120 VAC North American or 240 VAC European version) is attached to the AC/DC charger. Plug the AC/DC charger into a wall outlet and connect it to the scan tool's AC/DC power supply port.

Note: A fully discharged battery will take approximately 6 hours to fully charge. The scan tool can be used while charging.

5.2 Initial Activation

After turning on the tablet for the first time, the system will guide you through the activation process:

  1. Select Language: Choose your preferred system language from the list (e.g., English, Spanish, French, German). Click 'Next'.
  2. Connect Wi-Fi: On the Wi-Fi connection page, select an available network and enter the password to establish connectivity.
  3. Activate Device: Click 'Start Activation'. You may be prompted to enter your email address.
  4. Activation Success: A pop-up window will confirm successful activation. Click 'OK' to proceed to the diagnostic system.

You can also click the 'Trial' button to try the device before activation, but activation is highly recommended for software updates.

5.3 Vehicle Connection

The scan tool must be connected to the vehicle's OBD-II port to establish communication.

Wi-Fi Connection:

  1. Turn on the tablet.
  2. Connect the VCI box to the vehicle's OBD-II port using the main test cable and OBD adapter. Ensure the VCI's Wi-Fi connection is active.
  3. Switch on the vehicle's ignition and tap on the 'Diagnostic' application on the tablet to begin diagnosis.

Note: The vehicle's DLC (Diagnostic Link Connector) is not always located under the dash; refer to the vehicle owner's manual for its location. Some older vehicles may require a specific adapter other than the OBD II-16 adapter.

XTOOL D9S Wireless WIFI Connection

Image: XTOOL D9S Wireless WIFI Connection, illustrating the extended diagnostic range compared to traditional Bluetooth.

Wired Connection:

For functions such as ECU programming & coding, use the USB 3.0 to TYPE-B main cable to connect the tablet to the VCI box. This ensures stable data transmission and prevents function execution failures or other damage.

Note: For models with DoIP protocol communication, ensure the device is connected to the vehicle by wire.

5.4 Self-Test

The self-test function checks for faults in the internal hardware of the device. Do not connect the VCI box or tablet to the vehicle during a self-test to avoid damage.

  1. Plug the power cord into the 12V DC port of the VCI box.
  2. Navigate to: Main Menu >> Setting >> Self-test.
  3. Ensure the device is not connected to any vehicle, then click 'OK' to perform the self-test.

6. Operation

6.1 Beginning Diagnostic Testing

Once the tablet is properly connected to the vehicle, you can start the diagnostic process.

Vehicle Selection:

The scan tool offers three methods to access the smart diagnostics system:

  • Auto Scan: Automatically reads the vehicle's VIN code. Ensure the car and device are well connected.
  • Manual Input: Allows manual entry of the 17-character VIN code for accurate results.
  • Select Vehicle by Area: Choose a car brand by selecting the appropriate region (e.g., Europe, America, Asia). Some models may offer multiple entry methods like 'Automatic Detection', 'Manual Selection', or 'System Selection'.

If your model is not recognized:

  1. Update all software and check if the APP is updated in [Settings].
  2. Manually select the engine system to read ECU information and confirm if the VIN can be read.
  3. Contact XTOOL technical team with the VIN code to confirm model support.

6.2 Diagnosis Functions

The diagnostic application can read ECU information, read and clear DTCs (Diagnostic Trouble Codes), check live data, and perform actuation tests.

XTOOL D9S OE Level Full Diagnostics

Image: XTOOL D9S OE Level Full Diagnostics, showing various diagnostic functions like Read DTCs, Clear DTCs, Live Data Graphing, Freeze Frame, ECU Info, and Auto VIN.

Read ECU Information:

This function reads ECU version information, including software and hardware versions, production date, and part numbers. This is useful for maintenance records and ordering parts.

Read Trouble Code:

Displays current and historical Diagnostic Trouble Codes (DTCs) stored in the ECU memory.

Clear Trouble Code:

Allows clearing current and historical DTCs from the ECU memory, provided all issues have been resolved. If the trouble remains unresolved, the code will reappear. It is not recommended to clear codes if another mechanic will investigate the problem, as it may erase helpful information.

Read Live Data:

Provides real-time information from various sensors, including oil pressure, temperature, engine speed, and fuel levels. This helps in identifying problems and narrowing down maintenance scope. The speed of data display may vary based on vehicle data transmission speed and the number of parameters shown.

XTOOL D9S 8 In 1 Live Data Graphing

Image: XTOOL D9S 8 In 1 Live Data Graphing, showing multiple data PIDs displayed simultaneously in graph form.

  • Custom: Select and show multiple PIDs. Click 'Display All' to view all PIDs and understand relationships between data parameters.
  • Combine: Select multiple PIDs and click 'Combine' to graph different parameters on one chart.
  • Data Recording: Records current data values as text. View recorded files in 'Reports -> Data Replay'.
  • Pause: Freezes the data display for closer examination and review.

Actuation Test (Bi-Directional Control):

This function sends and receives information between the device and vehicle components to check if they are working correctly. It allows for comprehensive system assessments, such as activating cooling fans or checking windows and locks, streamlining troubleshooting. Users can actuate relays, injectors, and coils, and perform system tests.

XTOOL D9S Bi-Directional Control / Active Test

Image: XTOOL D9S Bi-Directional Control / Active Test, listing various active tests like Fuel heater on/off, EVAP Purge Solenoid, A/C Clutch, and more.

6.3 Special Functions

The D9S supports over 45 special reset functions for scheduled services, maintenance, and performance resets. These functions help resolve common problems and ensure optimal vehicle operation.

XTOOL D9S 45+ Special Functions

Image: XTOOL D9S 45+ Special Functions, showing icons for Key Programming, Power Balance, Language Change, Transport Mode, Oil Reset, EPB Reset, TPMS Reset, ABS Initialization, and more.

ABS Bleeding:

Restores ABS brake sensitivity by bleeding air from the brake system. Necessary when replacing brake components or after severe brake fluid shortage.

  1. Read operating instructions and precautions on screen.
  2. Attach bleeder bottle to the left rear bleeder screw.
  3. Open the left rear bleeder screw.
  4. Pump the brake pedal continuously until air bubbles are no longer visible, then select OK.
  5. Repeat for other wheels (left front, right front, right rear).
  6. Stop pumping and close the bleeder screw.

Oil Reset:

Resets the engine oil life system after an oil change, ensuring the system accurately calculates the next required service.

  1. Enter the Oil Reset menu and select the vehicle model.
  2. Follow on-screen instructions and press OK.
  3. Enter the Maintenance mileage reset menu.
  4. Input a reasonable value for remaining oil life and press OK.
  5. Confirm the new value and press OK.

EPB Reset:

Resets the electronic parking brake system and brake pads after replacement. This includes deactivating/activating brake control systems, assisting with brake fluid control, and setting brakes.

  1. Enter the EPB menu and select the vehicle model.
  2. Follow on-screen instructions and press YES.
  3. Enter the 'Enter maintenance mode' menu and release the handbrake. Press OK.
  4. Wait for 'Successful operation' message, then press OK.
  5. Enter 'Exit maintenance mode' and wait for 'Successful operation' message.

SAS Adjustment:

Calibrates the steering angle sensor (SAS) to store the current steering wheel position as the straight-ahead position. This is necessary after replacing the sensor, steering mechanical parts, or performing a four-wheel alignment.

  1. Enter the SAS menu and select the vehicle model.
  2. Enter the 'Set steering angle sensor' menu and follow instructions.
  3. Wait for instructions and press YES.
  4. Follow instructions and press OK.
  5. Wait for instructions and press OK.

BMS Reset:

Registers a new battery to the ECU and clears original low battery fault information. This is crucial after battery replacement to ensure accurate battery power usage detection and prevent invalidation of electric auxiliary functions.

  1. Enter the BMS Reset menu and select the vehicle model.
  2. Turn on the ignition switch.
  3. Press OK to continue.
  4. Enter battery capacity (within the given range) and press OK.
  5. Enter the battery manufacturer and press OK.
  6. Enter the 10-digit battery serial number and press OK.

Injector Coding:

Writes the identification code of a fuel injector into the ECU, allowing the ECU to recognize new injectors and accurately control fuel injection. This is required after replacing the ECU or an injector.

  1. Enter the Injector coding menu and select the vehicle model.
  2. Enter the 'Fuel injection nozzle injection volume adjustment' menu.
  3. Read the note and press OK.
  4. Read and confirm the value stored in the cylinders.
  5. Enter the 'Change the value of cylinder' menu, input the new 5-digit value, and press OK.

DPF Regeneration:

Manages Diesel Particle Filter (DPF) regeneration, component replacement teach-in, and DPF teach-in after replacing the ECM. This clears PM (Particulate Matter) from the DPF filter.

  1. Enter the DPF menu and select the vehicle model.
  2. Enter the DPF regeneration menu.
  3. Read and complete the requisites displayed, then press OK.
  4. Read the fuel tank level and carbon deposit load.
  5. Choose 'drive to warm up' option and follow instructions.
  6. Wait for carbon deposit value to decrease until 'Emergency regeneration has been completed' message appears.
  7. Wait 2 minutes for the particulate filter to cool down.
  8. Press 'drop out' to exit.

TPMS Reset:

Performs learning, matching, and resetting functions for the tire pressure sensor. This is necessary after tire replacement, troubleshooting tire pressure problems, or other signal loss issues.

TPMS reset methods include Automatic Relearn, Static Relearn, Copy ID, and OBD Relearn, depending on the specific model.

Note: This Scan Tool provides TPMS Reset/Relearn functions but is not a replacement for a dedicated TPMS activation tool. For new sensors or activation, consult a professional TPMS device.

ECU Coding & ECU Configuration:

ECU Coding: For VW/AUDI/SKODA only, performs online coding, component matching, adaptive data reset, and flashes hidden functions to optimize vehicle performance and customize settings.

XTOOL D9S Advanced ECU Coding & ECU Configuration

Image: XTOOL D9S Advanced ECU Coding & ECU Configuration, showing the process of optimizing vehicle performance, customizing settings, and flashing hidden functions.

ECU Configuration: For BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, refreshes hidden functions to reprogram adaptive data for components after repairs or replacements. Activates higher-level car functions and disables annoying features (e.g., seat belt buzzer, remote window control).

VAG Guided Functions:

For VW/Audi/SEAT/Skoda vehicles, the D9S provides step-by-step instructions for complex functions like special functions and ECU coding, ensuring adherence to manufacturer protocols.

XTOOL D9S VAG Guided Functions

Image: XTOOL D9S VAG Guided Functions, showing a diagnostic screen with steps for engine control unit identification.

FCA AutoAuth, CAN FD, and DoIP Protocols:

The D9S supports new communication protocols:

  • FCA AutoAuth (New in 2025): Essential for accessing certain systems in Chrysler 2018+ vehicles, allowing secure authentication for repairs.
  • CAN FD: Covers GM MY2020+ models without needing an extra adapter.
  • DoIP: Covers BMW E/F/G Chassis, Jaguar, and Land Rover vehicle makes.
XTOOL D9S Access the FCA SGW module

Image: XTOOL D9S Access the FCA SGW module, showing steps for AutoAuth for FCA and compatible vehicles like Chrysler, Jeep, and Dodge.

7. Maintenance

7.1 Software Update

After activating the device, regularly update the software modules via the 'Updates' screen. The device will identify all available software packages for download directly via the Internet.

Note: After contacting XTOOL Support to change language configuration, you need to download all software packages again.

Cautions: If the subscription expires, installed software remains available, but updates will be invalid. XTOOL is not responsible for restoring software deleted due to personal operation. To renew your subscription, contact your local dealer or XTOOL technical support.

7.2 Delete Software

Long-press unwanted software until selected, then click the 'Delete' button. Multiple software packages can be selected and deleted at once.

7.3 Factory Reset

Restoring factory settings in the Android OS system will erase custom settings and data, restart the device, and enter factory reset mode.

  1. From the main home page, click 'Settings'.
  2. Navigate to 'Backup & reset'.
  3. Follow on-screen prompts to initiate the factory reset.

After resetting, the device will restart and prompt for language selection and Wi-Fi connection. Once connected, it will download software in Factory mode. You will need to re-enter your email to activate the device.

8. Troubleshooting

Diagnostic Issues:

  • "System is OK" or "No Trouble Code" but vehicle issue persists: This indicates no related trouble code in the ECU, or the trouble is not under ECU control (e.g., mechanical issues). Inaccurate sensor signals within limits can be examined using Live Data.
  • Trouble codes reappear after clearing: If a trouble code reappears, the underlying issue has not been resolved. The ECU will detect the unresolved trouble and re-register the code.
  • Model not recognized or abnormal test data: Upgrade diagnostic software to the latest version via the Updates menu. If the issue persists, search for the ECU of the vehicle and select the menu for the model on the ECU nameplate, or contact XTOOL technical service.

General Device Issues:

  • Device not powering on: Ensure the battery is charged. Connect the AC/DC charger to a wall outlet and the device.
  • Wi-Fi connection issues: Verify correct Wi-Fi password. Ensure the device is within range of the Wi-Fi network.
  • Unstable data transmission during ECU programming: Use the USB 3.0 to TYPE-B main cable for wired connection between the tablet and VCI box to ensure stability.

9. Specifications

AttributeValue
Model NameXTOOL D9S
Display Size9.7 inches (1024*768 Resolution)
Operating SystemAndroid 10.0
CPU4-Core 1.5GHz Processor
Memory4GB RAM + 128GB Storage
Battery6400mAh 7.2V (7.3V)
Communication InterfaceOBD-II, Wi-Fi, USB
Wireless SupportWi-Fi (2.4GHz & 5GHz Dual-Frequency), Bluetooth
Wi-Fi Speed64 Mbps (Max)
Working Range (Wireless)Up to 66ft (20 meters)
Rear Camera8 MP
Software UpdateYes (3-Year Free Update)
External Testing CertificationCE
Item Weight7.5kg
Item Dimensions (L x W x H)52cm x 16cm x 37cm
MaterialPlastic
Supported ProtocolsDoIP, CAN FD
Vehicle Coverage10,000+ cars, 150+ brands (American, European, Asian, Australian vehicles after 1996)

Note: Not all OBD2 vehicles are supported. Cannot support OBD1, heavy-duty trucks, or Indian vehicles.

XTOOL D9S Car Coverage

Image: XTOOL D9S Car Coverage, listing supported brands for US, Europe, and Asia.

10. Warranty & Support

10.1 Warranty

Shenzhen XTOOLtech Intelligent Co., LTD. (the Company) warrants this XTOOL device to be free from defects in material and workmanship under normal usage for ONE YEAR from the date of purchase. Defective parts will be repaired or replaced with new or rebuilt parts, at the Company's option, without charge for parts or labor.

This warranty does not cover:

  • Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair, or improper storage.
  • Products whose mechanical or electronic serial number has been removed, altered, or defaced.
  • Damage from exposure to excessive temperature or extreme environmental conditions.
  • Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company.
  • Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts.
  • Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.

10.2 Technical Support & Remote Assistance

XTOOL strives to provide best-in-class support. For technical assistance, you can contact XTOOL's technical support center.

  • E-Mail: support1@xtooltech.com, support2@xtooltech.com
  • Tel: (888) 873 0082
  • Official Website: www.xtooltech.com

Remote Assistance:

The D9S features a 'Remote' function to start the TeamViewer QuickSupport program, enabling remote control for technical support. This allows XTOOL's technical support center to assist you directly.

  1. Turn on the tablet.
  2. Click 'Remote' in the Diagnostic application. The TeamViewer screen will display, generating a device ID.
  3. Your support partner needs to install the full version of TeamViewer (from www.teamviewer.com) on their computer.
  4. Provide your device ID to the XTOOL technician.
  5. A pop-up window will ask for permission to control your device. Click 'Allow' to accept.

Ensure the tablet is connected to the Internet before launching the remote desktop application.

XTOOL Direct Store Support Information

Image: XTOOL Direct Store Support Information, highlighting quality tests, purchasing inquiry, fast shipment, and technical team.

11. User Tips

  • Language Switching: The device supports up to 3 languages simultaneously and can be switched at will. If you cannot switch languages, update the Diagnosis APP to the latest version (Diagnosis APP > Setting > APP).
  • Wired Connection for Critical Functions: For ECU programming and coding, always use the wired USB connection to ensure stable data transmission and prevent potential issues.
  • Check Compatibility: Before performing any special function or advanced coding, always verify compatibility with your specific vehicle's VIN on the XTOOL website or by contacting support. Functions vary across vehicles.
  • Battery Life: A fully discharged battery takes approximately 6 hours to charge. The device can be used while charging.
  • Topology Map: Utilize the intelligent topology mapping feature to quickly identify faulty modules and understand the vehicle's communication structure, significantly improving diagnostic efficiency.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.