1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your FAZY Linux Car Multimedia Screen. This unit is designed to upgrade the in-car entertainment and navigation experience for specific BMW 1 Series models.
Figure 1: FAZY Linux Car Multimedia Screen with CarPlay interface.
Compatibility: This unit is compatible with BMW 1 Series E81, E82, E87, E88 models from 2004-2012 that are equipped with either the CCC or CIC system. If your car does not currently have a screen, this unit is not a standalone solution; please contact your seller for compatible options.
Figure 2: Compatibility check for BMW 1 Series E81, E82, E87, E88 with CCC and CIC systems.
2. Setup and Installation
Important: Before starting any installation, ensure your vehicle's engine is switched off and the battery is disconnected to prevent electrical damage.
2.1 Car Dashboard Removal
The installation process requires the removal of parts of your car's dashboard to access the existing head unit and wiring. Specific dashboard removal procedures vary by car model. For detailed video guides, please refer to the QR codes provided in the original PDF user manual or contact support.
2.2 Product List and Ports Introduction
The product package typically includes the main screen, a mounting bracket, power cable, USB cable, and AUX cable. The exact components may vary slightly depending on your specific car model.
Main Screen Ports: The rear of the main screen unit features connections for LVDS cable, USB cable, and the main power cable.
Power Cable Connections: The power cable harness includes multiple connectors for audio output (GND, 5V-out, Audio-out, ACC-out), camera inputs (Rear camera, Rear camera PWR, 360 DET, Video in), and connections to the original CD host and original power cable.
USB Cable: The provided USB cable typically has two USB ports (USB 1 for wired CarPlay, USB 2 for general USB display/data) and a connector for the screen unit (BM168).
2.3 Cables Connection Chart
For Cars with Original i-Drive: If your vehicle already has an internal i-Drive controller, you do not need to install an additional i-Drive unit, nor connect any cables specifically for the original i-Drive.
For Cars Without Original i-Drive: If your vehicle lacks an i-Drive controller, it is recommended to install an external i-Drive unit. The connection involves connecting the main screen to the original power cable, LVDS cable, camera/video inputs, and routing USB cables (one for wired CarPlay, one for general use) to the car's AUX port.
2.4 Resolution Setup
Before using the OEM system, set the correct screen resolution:
- Navigate to Setup > Car settings > Original Car's Screen Resolution.
- Select the resolution that matches your car's original screen. Available options include BMW 400x240, 640x240, 800x480, and 1280x480.
Reminder: Always restart your car after changing the resolution settings.
2.5 Sound Setup
Optical Fiber Cable Installation:
- Unplug the original power cable from the head unit.
- Connect it to the new power cable harness.
- Plug the new power cable to the head unit.
- If your car uses an optical fiber cable, carefully remove it from the original power cable and insert it into the designated slot on the new power cable harness.
GND Cable Connection:
- For CCC and NBT Systems: Ensure the GND cables are connected together.
- For CIC Systems: To prevent sound distortion, disconnect the GND cable connection.
Sound Transmission Methods:
The unit supports sound transmission via AUX cable or Bluetooth.
AUX Cable Transmission:
- Connection: For most BMW models (except 3/4 series or 1/2 series), the EXT-AUX cable does not need to be connected to your car's AUX port.
- Setup:
- From the main menu, tap the