1. Introduction
The YSRSAI 2.4GHz Mini LED Controller is a versatile lighting control solution designed for a wide range of LED strip lights. It features both 2.4GHz RF remote control and smartphone APP control (via WiFi and Bluetooth), offering flexible and convenient operation. This system supports various LED types, allowing for extensive customization of color, brightness, and color temperature.
Key Features:
- Wide Color Range: 16 million colors to choose from (for RGB/RGBW/RGBCCT).
- Adjustable Color Temperature: 2700K-6500K (for CCT/RGBCCT).
- Dimming & Saturation: Precise control over brightness and color saturation.
- Dual Control Modes: Operates via 2.4GHz RF remote and smartphone APP (WiFi/Bluetooth).
- Extended Control Distance: RF remote control distance up to 30 meters. Signal transmission allows for potentially limitless range between controllers.
- Smart Home Integration: Supports third-party voice control and works with Tuya Smart Life APP.
- Advanced Functions: Tap-to-Run & automation, auto-transmitting & synchronization, group control, device sharing, music rhythm, timing settings.
2. Setup Instructions
2.1 Unpacking and Components
Carefully unpack all components from the packaging. Ensure the following items are present:
- LED Controller (Model varies based on LED strip type: C01W, C02W, C03W, C04W, C05W)
- 2.4GHz RF Remote Control
- Remote Wall Mount (optional, depending on kit)
2.2 Wiring Diagram
Ensure the input voltage of your constant voltage power supply matches the controller's requirements (DC12-24V). Connect the LED strip to the controller and the power supply to the controller according to the specific wiring diagram for your LED strip type. Pay close attention to the polarity (cathode and anode) and ensure secure connections.
Important Wiring Notes:
- For loads exceeding 10A, ensure connecting cables are shorter than 40cm from the DC port to the LED strip.
- For loads exceeding 15A, use wires with a diameter over 1.5mm².
- Install the device in an area with good heat dissipation.
2.3 Smartphone APP WiFi Control Instruction
- Download and Install APP: Search for "Smart Life" or "Tuya Smart" in your device's app store (Apple App Store or Google Play Store) and install it.
- Account Registration/Login: Register for a new account if you don't have one, or log in directly if you already have an account.
- Link to Smartphone & Reset Devices:
- Ensure your smartphone is connected to a WLAN network.
- Long press the "SET" button on the controller, or switch the power ON-OFF-ON-OFF-ON-OFF-ON (4 times). The white light on the LED strip will blink, indicating the device is in link/reset mode.
- Open the Smart Life APP. It should automatically discover the device. If not, click "+" on the top right corner and select "add new device" manually. Follow the in-app steps to complete linking.
- Operation: Once successfully linked, the device will appear on your homepage. Click on it to access the control interface.
Note: Complete the linking process within 3 minutes. If the device exits linking mode, repeat step 3.
2.4 Bluetooth Control
After completing the WiFi network configuration, you can use Bluetooth for control when the WiFi router is disconnected. To do this:
- Ensure the device has been configured via WiFi on your smartphone.
- Disconnect the WiFi router from the device.
- Close WiFi and 4G signals on your smartphone.
- Enable Bluetooth on your smartphone and wait a few minutes for it to connect to the device.
Note: Bluetooth-only connection (without WiFi) supports short-range basic control only. Advanced features like grouping, scheduling, and third-party voice integration are disabled in this mode.
3. Operation
3.1 RF Remote Control
The 2.4GHz RF remote provides intuitive control over your LED strips. Refer to the remote layout for specific button functions:
- ON/OFF: Power on or off the connected LED strips.
- Color Wheel: Select desired color (for RGB/RGBW/RGBCCT).
- Brightness Adjustment (S+/S-): Increase or decrease brightness (0-100%).
- Color Temperature Adjustment (W+/W-): Adjust white light from warm to cool (for CCT/RGBCCT).
- Mode (M): Cycle through pre-programmed dynamic modes.
- Zone Control (1, 2, 3, 4): Select individual zones or groups of controllers to manage.
3.2 Group Control (4 Zones)
Multiple controllers can be assigned to different zones and controlled independently or simultaneously by a single remote. This allows for customized lighting in various areas.
3.3 Signal Transmitting and Mode Synchronization
- Signal Transmitting: One strip controller can transmit signals from the remote to another controller within 30 meters. This allows for an extended control range, as long as there's a controller within 30m of the previous one.
- Mode Synchronization: Controllers can operate synchronously even if started at different times, provided they are controlled by the same remote and are in the same dynamic mode with the same speed.
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | YSR-CGD-RGB (Controller models: C01W, C02W, C03W, C04W, C05W) |
| Input Voltage | DC 5-24V |
| Output Current | 6-12A/Channel (Total Max 15A) |
| Connection Mode | 2.4GHz RF, WiFi, Bluetooth |
| Remote Distance | 30M (RF) |
| Applicable Lights | Single/Dual color RGB RGBW RGBCCT Strip Light (5050, 3528, 5630, COB) |
| Material | Plastic |
| Working Temperature (Ta) | -20°C to 40°C |
| Dimensions (Controller) | 74.5 x 35.6 x 16.5 mm |
| Certification | CCC, CE, UL |
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller and remote. Do not use abrasive cleaners or solvents.
- Environment: Avoid exposing the device to direct sunlight, moist conditions, or high temperatures.
- Handling: Do not dismantle the controller. Non-professional users attempting to do so may cause fire or electric shock.
- Magnetic Fields: Avoid using the controller near metal areas or high magnetic fields, as this can affect the control distance and performance.
6. Troubleshooting
- Device not responding:
- Check power supply: Ensure the input voltage is DC12-24V. Higher voltages (above 24V) will damage the controller.
- Check connections: Verify all wiring connections are secure and correct, especially cathode and anode.
- Remote battery: Replace remote battery if necessary.
- Control distance issues:
- Interference: Ensure the controller is not installed near metal objects or strong magnetic fields.
- Obstructions: Clear any physical obstructions between the remote and the controller.
- APP linking failure:
- Timing: Ensure the linking process is completed within the 3-minute window after entering link/reset mode.
- Network: Verify your smartphone is connected to a stable WLAN network during WiFi setup.
- Reset: Re-enter link/reset mode by pressing the "SET" button or cycling power 4 times.
- Bluetooth control limitations:
- Remember that Bluetooth control without WiFi is for basic functions only and has a shorter range (within 20M). Advanced features require WiFi.
- LED strip not lighting up correctly:
- Verify the LED strip type matches the controller (e.g., RGB strip with RGB controller).
- Check wiring for correct color channel connections (R, G, B, W, CW, WW, V+).
7. User Tips
- Test Before Installation: Always test your LED strips and controller setup before final installation to ensure all components are working correctly.
- Proper Power Supply: Use a stable and compatible DC12-24V power supply to prevent damage to the controller and LED strips.
- Optimal Placement: For best RF remote performance, place the controller in an open area, away from large metal structures or other sources of interference.
- Utilize Group Control: Take advantage of the 4-zone group control feature to manage different lighting areas independently or together for dynamic effects.
- Keep APP Updated: Ensure your "Smart Life" or "Tuya Smart" app is always updated to the latest version for access to new features and improved stability.
8. Warranty and Support
8.1 Warranty Information
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors such as power surges.
8.2 Additional Resources
For a detailed PDF version of this user manual and other related documents, please refer to the official product page or download it directly: