1. Introduction
The ESP32-C3 Smart Voice Assistant Module is an advanced AI dialogue development board designed for various applications, including robot projects. It is equipped with an ESP32-C3 controller, ensuring smooth operation and support for Over-The-Air (OTA) updates. The module facilitates natural and emotional interaction through multi-round voice dialogue with Xiaozhi AI.
A 0.96-inch SSD1306 OLED screen is integrated, capable of displaying facial expressions, emojis, and real-time subtitles. For clear and loud audio, the module features ES8311 audio decoding and an NS4150B amplifier. It supports power supply via a 3.7V lithium battery or a Type-C interface, and offers rich expansion interfaces for future function enhancements.
Package Contents:
- 1x ESP32-C3 Module
- 1x Speaker

2. Technical Specifications
| Component | Specification |
|---|---|
| Main Controller | ESP32-C3 QFN-32-EP |
| Flash Memory | NOR FLASH 16MB |
| Audio & Amplifier | ES8311 + NS4150B |
| Power Chip | LGS4056 (single lithium battery) |
| Expansion Interfaces | U0RXD, U0TXD, VSys+GND (VSys voltage approx. 4.5V), 3V3+GND (6-Pin total) |
| Screen Type | 0.96-inch SSD1306 OLED |
| Screen Resolution | 128x64 |
| Battery (Default) | 602030 300MAH lithium battery (battery level detection not supported) |
| Speaker (Default) | 3514 ultra-thin cavity speaker (8 Ω 2W), replaceable with standard 1.25mm interface 3W cavity speaker |
| Dimensions | 36mm x 36mm (1.42in x 1.42in) |



3. Setup Guide
3.1. Initial Device Restart and Firmware Check
- Ensure the Xmini-C3 development board has been flashed with the appropriate firmware.
- Re-power the Xmini-C3. If no battery is connected, plug it into a USB port for power.
- Flip the power switch upward.
- Wait a few seconds for the Xmini-C3 development board to enter network configuration mode. The colored indicator on the board will flash blue steadily.
Note: If you are flashing using a VSCode integrated development environment or IDF command line mode, the development board will automatically reboot and does not require manual rebooting.

3.2. Network and Wi-Fi Configuration
- Connect to the Device Hotspot: Use your phone or computer to connect to the Xmini-C3 development board's hotspot. Open your device's Wi-Fi settings and find a wireless LAN starting with "Xiaozhi-". This is the hotspot you need to connect to.
- After selecting the hotspot and connecting, wait a few seconds. The Wi-Fi selection screen should automatically appear. Do not manually close the hotspot beforehand.
- Select Wi-Fi and Enter Password: Select your home or office Wi-Fi network from the 2.4G networks scanned by the Xiaozhi Hotspot. The Wi-Fi name (SSID) will be automatically filled in. Enter the password for the selected Wi-Fi network in the password field and click the "Connect" button to submit. If the password is already saved on your phone, it will be submitted automatically.


Note: If the page does not automatically jump to the Wi-Fi configuration page (possibly due to compatibility issues), ensure your phone is connected to the hotspot starting with "Xiaozhi-" and do not switch networks. Then, open your mobile browser and enter 192.168.4.1 to directly access the Wi-Fi configuration page.
- Upon successful connection, the device will automatically connect to the network and reboot within 3 seconds. After rebooting, it will automatically connect to the configured Wi-Fi network.

3.3. Activating the Xmini-C3 Device and Creating an Agent
- Access Configuration Panel: After the Xmini-C3 boots up and enters standby mode, press the BOOT button to wake it up and enter conversation mode. Speak a few words (e.g., "Please configure the network"). The device will detect if it's unregistered and play a 6-digit verification code.
- Visit https://xiaozhi.me/ on your phone or computer. If you don't have an account, register first.
- Create an Agent: After logging in, you will see the welcome screen. Click "Control Panel" to enter. Then, click "+ New Agent" to create an AI agent and enter the desired agent name.
- Add Device: Follow the device's voice prompts. In the console, click [Add Device]. A pop-up box will appear. Enter the 6-digit verification number announced by Xiaozhi AI. Click OK to submit and complete device registration. The device list will refresh, and your Xmini-C3 terminal will appear.
4. Operation
4.1. Basic Interaction
- Wake-up: Press the Wake-up button (BOOT button) once to initiate a conversation or continue a previous one.
- Voice Dialogue: The module supports multi-round voice dialogue with Xiaozhi AI. Speak clearly to interact.
- OLED Display: The 0.96-inch SSD1306 OLED screen will display facial expressions, emojis, and real-time subtitles during interaction.


5. Maintenance
5.1. OTA Updates
The Xmini-C3 supports automatic Over-The-Air (OTA) firmware upgrades. Ensure that the OTA upgrade operation is enabled in the device list within the Xiaozhi AI console. This allows the device to receive and install new firmware versions seamlessly.
5.2. Re-provisioning the Xmini-C3 Development Board
In versions V0.9.9 and later of the Xiaozhi AI firmware, the device supports saving multiple Wi-Fi networks for network configuration.
Re-provisioning after automatic connection fails:
If the Wi-Fi network changes and the Xiaozhi AI terminal fails to reconnect to the previously connected Wi-Fi network (after 5 retries), the device will automatically scan for and connect to any previously registered Wi-Fi network. If a registered network is found, the terminal will enter the re-provisioning state. After approximately 10 seconds, the voice prompt "Please configure the network" will be played.
Configuring a New Wi-Fi Network:
After the Xiaozhi AI device restarts and before successfully connecting to a network (while the blue light is flashing), press the BOOT button. The Xiaozhi AI terminal will enter the re-provisioning state. On the re-provisioning screen, you can view previously configured Wi-Fi networks. If you wish to remove any of them, click the 'X' next to the corresponding Wi-Fi network name to delete its configuration.

6. Troubleshooting
- Device not connecting to Wi-Fi: Ensure the Wi-Fi password is correct. If the device fails to reconnect after a network change, it will attempt to re-provision. Follow the re-provisioning steps in Section 5.2.
- Wi-Fi configuration page not appearing: If your phone does not automatically redirect to the Wi-Fi configuration page, ensure your phone is connected to the "Xiaozhi-" hotspot. Then, manually open a browser and navigate to
192.168.4.1. - No sound from speaker: Check the speaker connection to the module's speaker jack. Ensure the volume is adequate.
- Device unresponsive: Try toggling the power switch off and on. If issues persist, ensure the device is properly powered via USB-C or a charged lithium battery.
7. User Tips
No specific user tips are available from customer reviews or Q&A at this time. For best performance, ensure your device's firmware is always up to date via OTA updates.
8. Warranty and Support
For technical support or warranty inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
A user manual in PDF format may be available for download. Please check the product page or manufacturer's website for additional resources.
For further assistance, refer to the official documentation or support channels provided by diymore.