HUGEROCK R50 R5015

Contents

HUGEROCK R50 R5015 Industrial Rugged Android Handheld PDA User Manual

Model: R50 R5015

1. Introduction

This manual provides essential information for the safe and efficient operation of your HUGEROCK R50 R5015 Industrial Rugged Android Handheld PDA. Please read this manual thoroughly before using the device and keep it for future reference.

Package Contents

Upon unboxing, please verify that all items listed below are present:

  • HUGEROCK R50 R5015 Handheld PDA
  • USB Cable
  • Charger (5V 2A)
  • Introduction Manual
  • Screen Protector
  • Packaging Box
  • Aircraft Box
Contents of the HUGEROCK R50 R5015 product package
Figure 1: HUGEROCK R50 R5015 Product Package Contents

2. Device Overview

Familiarize yourself with the physical components and layout of your HUGEROCK R50 R5015 device.

Detailed diagram of the HUGEROCK R50 device with numbered callouts for various buttons, ports, and features.
Figure 2: HUGEROCK R50 R5015 Device Layout

Key Components:

  1. Power button
  2. Scan button
  3. MIC
  4. Front camera
  5. Earphone jack
  6. Light sensation
  7. Handset
  8. Charge lamp
  9. Home button
  10. Arrow keys and confirm key
  11. Menu key
  12. Back key
  13. Number key
  14. Power ON/OFF button
  15. # Button
  16. * Button
  17. ChargePoint
  18. USB Type-C port
  19. Volume up button
  20. Volume down button
  21. Main camera (optional)
  22. Function box (optional)
  23. Nameplate
  24. Speaker
  25. Battery

3. Setup and Initial Use

3.1. Installing SIM and TF Cards

The device supports 1.8/3.3V SIM cards and Micro SD (T-FLASH) cards up to 128GB for external memory. Locate the card slots, typically under the battery cover or on the side, and insert the cards as indicated by the diagrams (if available on device) or markings.

3.2. Battery Installation and Charging

The HUGEROCK R50 R5015 features a 5000mAh replaceable battery. Ensure the battery is correctly installed before first use. Connect the device to the provided 5.0V 2A-10W charger using the USB Type-C cable. The charge lamp will indicate charging status. Fully charge the device before initial operation.

3.3. Powering On/Off

To power on, press and hold the Power ON/OFF button (14) until the screen lights up. To power off, press and hold the Power ON/OFF button, then select 'Power off' from the options.

4. Operating Instructions

4.1. Basic Navigation

The device runs on Android 10.0/11.0. Navigate using the touch screen, arrow keys (10), and dedicated buttons like Home (9), Back (12), and Menu (11).

Image showing the practical symmetrical buttons for left and right-hand use, and T9 keyboard input.
Figure 3: Practical Design for Easy Operation

4.2. Barcode Scanning

The HUGEROCK R50 R5015 is equipped with a high-quality barcode module (Newland N1 / Uode U3020 / Hobeywell N3680) compatible with over 200 types of barcodes, including 1D and 2D codes.

  • To Scan: Open the scanning application. Point the device's scanner at the barcode. Press the dedicated Scan button (2) to activate the scanner. The device will emit a red scanning beam for accurate identification.
  • Supported 1D Codes: UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
  • Supported 2D Codes: Code39, Code128, PDF417, MicroPDF417, DataMatrix, Composite, RSS, TLC-39, QR code, Micro QR code, Aztec, MaxiCode, Postal Code (US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal), etc.
Image demonstrating accurate barcode identification with a red scanning beam.
Figure 4: Accurate Barcode Identification

4.3. RFID/NFC Functionality

The R50 R5015 supports various RFID modules, including UHF, LF, and HF/NFC, depending on the specific model configuration.

  • UHF Module (R5015): For fast reading and writing of RFID tags. The UHF module can achieve a tag recognition speed of 3000 sheets per minute.
  • LF RFID (125K/134K Animal Module): For specific low-frequency RFID applications.
  • HF RFID/NFC (13.56MHz): Supports ISO14443A/B, ISO15693 protocols, and NFC. Compatible with M1 (S50, S70), CPU, and NFC labels. Read-write distance is typically 2-5cm.

To use RFID/NFC, open the relevant application and position the device near the tag or card. The device will automatically detect and process the information.

Hand holding the HUGEROCK R50, demonstrating UHF RFID reading capability with blue signal waves.
Figure 5: UHF RFID Fast Read and Write
Image showing the NFC module in action, expanding card swiping scenarios.
Figure 6: NFC Functionality

4.4. Connectivity

The device supports comprehensive communication and networking options:

  • Phone Call: GSM /WCDMA/CDMA 1X/VoLTE
  • 2G Bands: GSM(B2/3/5/8)
  • 3G Bands: WCDMA(B1/2/5/8), Evdo: BC0/BC1 CDMA: BC0/BC1
  • 4G Bands: TD-LTE(B38/39/40/41);FDD LTE(B1/2/3/4/5/7/8/12/17/20/28)
  • Wi-Fi: Dual-band (2.4GHz/5Ghz) single stream 802.11 a/b/g/n/ac
  • Bluetooth: 4.2 Low Energy (LE)
  • Navigation: Integrated GPS + GLONASS + Beidou positioning, support APGS

5. Maintenance

5.1. Cleaning the Device

To maintain optimal performance and longevity, regularly clean your device. Use a soft, lint-free cloth slightly dampened with water or a mild screen cleaner. Avoid harsh chemicals, abrasive materials, or excessive moisture. Ensure all ports are dry before use.

5.2. Battery Care

The 5000mAh battery is replaceable. To maximize battery life:

  • Avoid extreme temperatures.
  • Do not allow the battery to fully discharge frequently.
  • Use only the provided charger and USB cable.
  • If replacing the battery, use an official HUGEROCK replacement part.

5.3. Software Updates

Periodically check for system updates to ensure your device has the latest features, security patches, and performance improvements. Connect to a stable Wi-Fi network and navigate to System Settings > About Phone > System Update (or similar path depending on Android version).

6. Troubleshooting

If you encounter issues with your device, refer to the following common problems and solutions:

  • Device does not power on: Ensure the battery is charged. Connect the charger and try again. Verify the battery is correctly installed.
  • Scanning issues (barcode/RFID): Ensure the scanning application is open and the scanner is activated. Check for obstructions on the scanner window. Ensure the tag/barcode is within the optimal reading range.
  • Connectivity problems (Wi-Fi/Cellular): Check network settings. Ensure Wi-Fi is enabled and connected to a valid network. For cellular, verify SIM card installation and network coverage.
  • Device is unresponsive: Press and hold the Power ON/OFF button for about 10-15 seconds to force a restart.

For more detailed troubleshooting, refer to the FAQ section or contact customer support.

7. Specifications

The HUGEROCK R50 R5015 is designed for industrial use with robust specifications.

7.1. Hardware Specifications

FeatureDescription
CPUMTK P60 (ARM A73 2.0GHz Octa-core)
GPUMali-g72mp3
RAM4GB
Internal Memory32GB
External MemoryMicro SD card (T-FLASH card), max 128GB
Main Camera13.0MP(AF) with flash LED
Sub CameraN/A
Battery5000mAh (Replaceable battery)
Display4.5 inch IPS/AFFS 960*540 QHD industrial 550nit Sunlight Readable
Touch PanelCapacitive/frosted tempered film supports glove touch/spray/active capacitive pen

7.2. I/O, Sensor & Navigation

FeatureDescription
SIM Card1.8/3.3V SIM card
TF CardMicro SD card (T-FLASH card); max 128GB
Headphone3.5mm (CTIA)
Data interfaceUSB Type-C 24pin support OTG
SensorsGravity, Motion, Direction, Magnetic Field, Gyro, Rotation Vector, Light, Acceleration
Charger5.0V 2A-10W
NavigationIntegrated GPS + GLONASS + Beidou positioning, support APGS

7.3. Appearance & Dimensions

FeatureDescription
Size197*92*26.5mm (L×W×H)
Weight460g
Color & MaterialBlack & Gray

7.4. Industrial & Reliability Design

FeatureDescription
Shake-proof1-19Hz/1.0mm; 19-200Hz/1.0g
Dropproof /IKMIL-STD-810G/Method516.6/Procedure IV & Touch Panel IK05
WaterproofClass 5 (IEC 60529)
DustproofClass 6 (IEC 60529)
ReliabilityMTBF>5000h; MTTR<0.5h
Operating Temperature-20°C to 55°C
Storage Temperature-40°C to 80°C
RH5% to 95% (No condensation)
Operating AltitudeMax: 4,500 m (15,000 feet)

7.5. Certification & Software

FeatureDescription
Certification3C /FCC/CE/ROHS/IP65 (IEC 60529)
LanguageEnglish, Spanish, Portuguese (Brazil), Portuguese (Portugal), Italian, German, Dutch, French, Polish, Romanian, Turkish, Russian, Arabic, Indonesian, Malay, Thai, Vietnamese, Hindi, Hebrew, Simplified Chinese, Traditional Chinese, etc.
OSAndroid 10.0/11.0

8. Warranty and Support

8.1. Warranty Information

The HUGEROCK R50 R5015 comes with a 24-month warranty after shipment. An extended warranty for up to 36 months is available for an additional 10% cost.

Image showing after-sales services: >5 years life cycle, 2-year warranty, 30-day free replacement, 1% spare parts guarantee.
Figure 7: After-Sales Services Overview

8.2. Technical Support

Technical support is available online to assist with problem resolution. For hardware issues, parts or components may be sent, along with instructions for fitting if you have a technician. Alternatively, the device can be sent back for repair.

8.3. Software Development Kit (SDK)

A free SDK is offered if you order a sample. Support engineers are available to assist with software development.

9. User Tips

  • Optimize Scanning: For best barcode and RFID scanning results, ensure the target is clean and well-lit. Maintain a steady hand and the recommended distance for optimal read rates.
  • Battery Management: The replaceable 5000mAh battery allows for continuous operation for up to 12 hours. Consider having a spare charged battery for extended shifts.
  • Ruggedness: The device is IP66 rated and MIL-STD-810G drop-proof (2.0m). While highly durable, avoid intentional abuse to prolong its lifespan.
  • Customization: The flexible design supports extended interfaces and modules. If your operational needs change, inquire about additional modules like fingerprint readers or different RFID types.

10. Frequently Asked Questions (FAQ)

Q: Are you manufacturer?
A: Yes, we are manufacturers. All of our products are fully patented, ID/MD design, hardware and software, mold, assembly are done by our own team.
Q: Does the handheld can read QR code and common 1d bar codes?
A: Yes, if choose 2d scan version, it can read both 1D common code and 2d codes such as QR, PDF417, Data Matrix, PDF417 code...
Q: Would you provide SDK for me?
A: Yes, we offer free SDK if you order sample. In addition, we also have support engineers to assist you with software development.
Q: What is the minimum order (MOQ)?
A: We accept one unit for standard products.
Q: Can we get the free sample?
A: Sorry, generally we would not provide the free sample. If the customer confirm the specification and price, they can order the sample firstly for the testing and evaluation.
Q: Can I choose multiple functions into 1 device?
A: Yes, you can choose multiple functions into one device. Different functions depending on the product model, optional functions: RFID (LF/HF/UHF), Fingerprint, Barcode scanner.
Q: What's Your Products Warranty?
A: We Offer 24 Months Warranty after shipment sent.
Q: Can I extend the warranty?
A: We offer a deferred warranty for up to 36 Months, and the price for the warranty extension is 10% up.
Q: How to repair the device if any problem?
A: We will provide technical support online to solve problems. If for a hardware problem, we could send the parts or components and teach the customer to fit if they have a technician or can also send back to us to fix it.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.