Laser Tree LT-5W-F45

Contents

LASER TREE LT-5W-F45 5W Laser Module User Manual

For CNC 3018 PRO Engraving and Cutting Machines

1. Product Introduction

The LASER TREE LT-5W-F45 is a professional 5W optical power laser module designed for precision engraving and cutting. It is specifically compatible with CNC 3018 PRO machines and other CNC machines featuring a round top mounting base, such as 1610 pro, 3018, 3018 Max, 4540, and 3020 Plus engraving machines.

This module incorporates advanced features like a built-in laser driver, air assist capability, eye protection, and a fixed-focus design for ease of use.

LASER TREE LT-5W-F45 Laser Module with key features
Overview of the LT-5W-F45 Laser Module highlighting its features: Built-in Laser Driver, Air Assist, Eye Protection, Focus-setting Free, Laser Engraving, and Laser Cutting.

2. Specifications

ParameterValue
Model NumberLT-5W-F45
Optical Power5W (±1W)
Wavelength450nm (±10nm)
Focus Length45mm (Fixed-focus)
InputDC 12V 2A (3-3.5A)
PWM Modulation0/3-12V, 0-5kHz
Operating Temperature0-60°C
InterfaceXH2.54-3P Socket
Cable3PIN, 80cm
Module Sizeφ44.2cm, H130cm (approx. 44.2mm diameter, 130mm height)
Module Weight196.5g
ApplicationEngraving or Cutting
ControllerCNC USB
Fan Speed10000rpm
MaterialAluminum & Copper

2.1. Outline Dimensions

Laser Module Outline Dimensions Diagram
Diagram showing the outline dimensions of the laser module in millimeters. The module has a diameter of approximately 44.2mm and a height of 128mm. It also indicates the VCC, GND, and PWM pins, air assist port, and laser view window.

3. Setup and Connection

3.1. Standard Configuration (What's in the Box)

The standard package for the LT-5W-F45 laser module includes the following components:

Standard Configuration Components
Image showing the components included: LT-5W-F45 laser module, 3PIN input cable (80cm), air tube (Φ8*6mm, 1.5m), three focus fixing plates (3mm, 4mm, 5mm), a spare protective lens, and an eye shield.

3.2. Connection Description

Before connecting the laser module, ensure it is compatible with your engraving machine. This involves checking both voltage parameters and main control board port definitions.

3.2.1. Direct Connection (Compatible Voltage & Pin Definition)

If your engraving machine's voltage and main control board's PIN definitions (PWM, GND, VCC) match the laser module, you can connect it directly.

Direct Connection Diagram
Diagram illustrating the direct connection of the laser module to an engraving machine's main board. The 3-pin cable from the laser module connects to the corresponding PWM, GND, and VCC ports on the main board.

3.2.2. Pin Definition Mismatch

If the pin definition of the connector on your engraving machine's main board is not pin-to-pin with the laser module's cable, you must rearrange the wire sequence of the cable to match the main board's pin definition (VCC, GND, PWM).

  • Correct Connection: Ensure the red wire connects to VCC, black to GND, and yellow to PWM.
  • Incorrect Connection: Connecting red or yellow wires incorrectly can lead to malfunction.

3.2.3. Voltage Mismatch or 2-Pin Main Board (Using Driver Adapter P-DA-01)

If your engraving machine's voltage (e.g., 24V) does not match the 12V laser module, or if your main board has a 2-pin connector instead of 3-pin, you will need to use the P-DA-01 driver adapter (sold separately).

Driver Adapter P-DA-01 Overview:

Driver Adapter P-DA-01 Diagram
Detailed diagram of the P-DA-01 Driver Adapter, showing its various input/output connectors and power switch. Key components include 3PIN and 4PIN input/output connectors, DC input for 12V/24V, power switch (EXT/INT), and TTL/PWM indicator.

Connection Steps with P-DA-01:

  1. Connect the cable from your engraving machine to the corresponding input connector on P-DA-01 (e.g., Input D for 2-pin, Input C for 3-pin, Input A/B for 4-pin).
  2. Connect the cable of the laser module to the Output A connector on P-DA-01.
  3. Connect the appropriate power adapter (12V or 24V) to the DC Input connector on P-DA-01.
  4. Push the power switch on P-DA-01 to the 'EXT' position to use external power.
  5. The power indicator will be red when the power cable is connected correctly. The TTL/PWM indicator will be green when the TTL/PWM cable is connected correctly.

4. Operation

4.1. Eye Protection

The laser module features an eye protective cover designed to effectively filter blue light during engraving or cutting. Always wear laser goggles to protect your eyes when operating the laser module, even with the protective cover in place.

Eye Protective Cover Design
Illustration of the eye protective cover design, showing how it filters blue light emitted by the laser.

4.2. Air Assist Functionality

The professional air assist system blows air through the air nozzle, significantly enhancing cutting performance and reducing burn marks, resulting in cleaner cut edges.

Air Assist Comparison
Comparison showing the difference between cutting with air assist (clean-cut edges) and without air assist (scorched edges).

4.3. Reference Settings for Cutting

The focal length of the LT-5W-F45 laser module is fixed at 45mm. When cutting, position the focus slightly below the surface of the material. Use the provided focus fixing plates as a reference.

Material ThicknessPlate Thickness for Focus
2mm7mm
3mm7mm
4mm5mm
5mm5mm

For example, to cut 8mm plywood, use a 4mm focus fixing plate.

Cutting Examples and Speeds
Examples of cutting various materials: 3mm plywood at 200mm/min, 5mm pinewood at 80mm/min, and 5mm acrylic at 25mm/min.

4.4. Reference Settings for Engraving

When engraving, ensure the laser's focus is precisely on the material surface. For example, use a 7mm focus fixing plate for engraving.

Engraving and Cutting Samples
Various examples of engraving and cutting results on different materials, showcasing the module's capabilities.

5. Maintenance

  • Dust Prevention: If the laser module is not used for an extended period, ensure the lens is protected from dust.
  • Air Nozzle Replacement: When replacing the air nozzle, be careful not to contaminate the lens. Fingerprints or dust on the lens will reduce the laser module's output power or even damage the lens.
  • Lens Cleaning: If you notice a decrease in cutting ability, the lens might be dirty. Use a clean alcohol swab to clean it.
Lens Cleaning Illustration
Visual guide for cleaning the laser lens. Shows incorrect handling (fingerprints, dust) and the correct method using an alcohol swab to clean the lens, leading to a clean or replaced protective lens.

5.1. Heat Dissipation

The module is equipped with an aluminum body and a large cooling fan to ensure efficient heat dissipation, allowing for continuous operation.

Heat Dissipation Design
Image illustrating the excellent heat dissipation design of the laser module, featuring an aluminum body and a cooling fan.

6. Troubleshooting

Problem: The fan runs, but the laser does not turn on.

Solution 1: Check Signal Port (PWM) Match

  • Verify that the signal port (PWM) on your engraving machine's main board is correctly matched with the laser module's connection.
  • If you are unsure which port on the main board is 'PWM', consult the main board's seller or manual.

Solution 2: Reconnect Laser Module

  1. Power off the engraving machine.
  2. Disconnect the cable of the laser module from the main board.
  3. Reconnect the laser head to the main board and restart your engraving machine.

For more information about maintenance and troubleshooting, you can contact lasertree@micost-optotech.com.

7. User Tips

  • Cutting Performance: While the 5W optical power is excellent for engraving, its cutting capability might be limited for thicker or harder materials. Manage expectations for heavy-duty cutting tasks.
  • Fixed Focus: The module has a fixed focus. Ensure accurate material placement and use the provided focus fixing plates for optimal results in both engraving and cutting.
  • Compatibility: The module is confirmed to fit TwoTrees TTC-3018 CNC machines without issues, in addition to the listed CNC 3018 PRO variants.
  • Air Assist for Cleanliness: Always use the air assist feature, especially for cutting, to prevent burning residue and achieve cleaner edges.

8. Warranty and Support

This product is covered by a warranty that ensures high quality and genuine components. For detailed warranty information and support, please refer to the official user manual PDF available at LASER TREE LT-5W-F45 User Manual (PDF).

For any questions or issues, you can contact customer service or technical support via the contact information provided in the official documentation or through your purchase platform.

© 2023 Laser Tree. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.