XIAOTREE HM2005, HM1945, HM1947, HM1949, HM2007, FH002

Contents

XIAOTREE Rechargeable Hand Warmer User Manual

Models: HM2005, HM1945, HM1947, HM1949, HM2007, FH002

Brand: XIAOTREE

Introduction

Thank you for choosing the XIAOTREE Portable Rechargeable Hand Warmer. This 2-in-1 device is designed to provide warmth and comfort in cold weather, making it an ideal companion for outdoor activities like hunting, golf, camping, or simply enjoying the winter season. Each hand warmer features a 3000mAh battery, offering efficient and fast heating. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your hand warmers.

Important Safety Warnings

WARNING: Please read and understand all safety instructions before use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not use, charge, or store the product in high-temperature environments (e.g., direct sunlight, near fire sources, or radiators). The ambient temperature should be controlled between -10°C and 45°C.
  • Do not disassemble, squeeze, puncture, or impact the product. This can damage the battery and heating element, posing safety hazards.
  • Use only matching charging heads and cables. Using non-matching accessories may cause incorrect charging voltage/current, leading to product damage or fire.
  • Avoid prolonged direct contact with skin, especially while sleeping, to prevent low-temperature burns. When using the high-temperature setting, it is recommended to take a 1-hour break.
  • Minors, pregnant women, individuals with sensitive skin, or those with mobility impairments must use this product under adult supervision.
  • Do not use the hand warmer for heating food, liquids, or any purposes other than hand warming.
  • Battery Disposal: This product contains a lithium-ion battery. For disposal, please check your local authority's website for information and dispose of the battery safely in accordance with applicable legal requirements.

Package Contents

Your package should contain the following items:

  • 2 x XIAOTREE Rechargeable Hand Warmers (3000mAh each)
  • 1 x Charging Cable (USB)
  • 1 x User Manual (PDF version available: View PDF)

Specifications

Feature Description
Product Name Portable Outdoor Hand Warmer
Brand XIAOTREE
Model Numbers HM2005, HM1945, HM1947, HM1949, HM2007, FH002
Material ABS
Battery Capacity (per unit) 3000mAh (Total 6000mAh for 2-pack)
Voltage 3.7V & Under (DC Power Supply)
Heating Gears 3 (Low, Medium, High)
Fast Heating 3 seconds
Dimensions (approx.) 9.7 cm (3.82 in) Length, 5 cm (1.97 in) Width, 1.8 cm (0.7 in) Thickness
Weight (per unit) Approx. 113g (0.25 lbs) (Package weight 226g for two units)
Origin Mainland China
Hand warmer dimensions and pocket size
Dimensions of the hand warmer, highlighting its compact, pocket-friendly size.
Back of hand warmer showing specifications
Rear view of a single hand warmer, displaying model (FH002) and 3000mAh capacity.

Initial Setup

Important Note: To ensure safe transportation, the product battery is shipped completely depleted of power. Please fully charge it before first use.

1. Charging Preparation

  1. Take out the hand warmer and the included charging cable.
  2. Insert one end of the charging cable into the charging port located on the bottom of the hand warmer.
  3. Connect the other end of the charging cable to a USB charging adapter (such as a mobile phone charger) or a computer USB port.
  4. The indicator light will illuminate, indicating that the device is charging.

2. Charging Observation

  1. The indicator light will flash during charging.
  2. It will stop flashing when the battery is fully charged.
  3. Please unplug the charging cable immediately once fully charged to avoid overcharging.
Hand warmer charging with red indicator light
Hand warmer showing a red indicator light during charging.
Hand warmer charging with blue indicator lights
Hand warmer showing blue indicator lights, typically indicating a higher charge level or full charge.

Operation

1. Turning On and Adjusting Temperature

  1. After fully charging, press and hold the power button on the side of the device to turn it on.
  2. Continue to press the power button to cycle through different hand warmer modes (temperature gears). The device typically has 3 gears: Low, Medium, and High. Refer to the product markings for specific indicator lights for each mode.
  3. Press and hold the power button again to turn off the hand warmer function.
Hand warmer with temperature settings
Temperature settings: High (145-150°F / 60°C), Medium (126-131°F / 55°C), Low (108-113°F / 45°C).

2. Hand Warming

After turning on the corresponding setting, wait 3-5 minutes for the device to reach the set temperature. You can hold it in your hand or place it in a pocket or glove to keep your hands warm.

Woman holding hand warmer in snow
The hand warmer provides warmth for outdoor activities in cold environments.

3. Magnetic 2-in-1 Design

The hand warmers feature a magnetic design, allowing them to be used as two separate units or combined into one for dual-sided heating. Simply separate the two halves to use individually, or bring them together to magnetically connect for a larger heating surface.

Magnetic 2-in-1 hand heater feature
The hand warmers can be used separately or magnetically joined for middle-side heating.

Maintenance

1. Charging and Storage

  • After each use, if the battery is low (indicator light flashing), please charge it promptly.
  • If the hand warmer will not be used for a long period, it is recommended to charge it every 3 months to prevent battery depletion and damage.

2. Cleaning Method

  • When cleaning the surface of the hand warmer, wipe it with a dry or slightly damp soft cloth.
  • Do not rinse or soak the device with water to avoid moisture entering the interior and causing a short circuit.

Troubleshooting

Problem Possible Cause Solution
Device does not turn on. Battery is depleted. Charge the device fully before use.
Device not heating up. Not turned on; low battery. Ensure the device is turned on and charged. Allow 3-5 minutes to reach temperature.
Indicator light flashing during use. Low battery warning. Recharge the hand warmer promptly.
Device gets too hot. High temperature setting; prolonged contact. Switch to a lower temperature setting or take a break from direct skin contact.

User Tips

  • Initial Charge: Expect the first full charge to take approximately 4 hours. The capacity is generally accurate as stated.
  • Dual-Sided Heating: For warmth on both sides of your hand, ensure both magnetic units are connected. If using only one unit, it will heat from one side.
  • Effective Heating: The hand warmers heat up quickly and effectively, providing good warmth for cold conditions.

Frequently Asked Questions (FAQ)

Q: Can I use the hand warmer while it's charging?
A: No, it is not recommended to use the hand warmer while it is charging to avoid potential safety hazards.
Q: How long does the battery last on a full charge?
A: Battery life varies depending on the temperature setting used. Higher settings will consume battery faster.
Q: Is the hand warmer waterproof?
A: No, the hand warmer is not waterproof. Avoid contact with water or other liquids to prevent damage.

Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.