1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your GEYA DC Miniature Circuit Breaker (MCB) model GYM9H-125DC. This device is designed to protect DC circuits from overloads and short circuits, ensuring the safety and reliability of your electrical systems, particularly in solar photovoltaic (PV) and communication applications.
2. Safety Information
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel.
- Always disconnect power before installing or servicing the circuit breaker.
- Ensure all wiring complies with local and national electrical codes.
- Do not operate the circuit breaker if it appears damaged.
- Verify correct polarity when connecting DC circuits.
- Use appropriate personal protective equipment (PPE) during installation.
3. Product Overview
The GEYA GYM9H-125DC Miniature Circuit Breaker offers robust protection for your DC electrical systems.
3.1 Key Features

Description: This diagram illustrates the core protective functions of the circuit breaker:
- Overload Protection: Prevents damage from excessive current draw.
- Short-circuit Protection: Rapidly disconnects power during a short circuit fault.
- Control Isolation: Provides a safe means to isolate circuits for maintenance.
- Safe and Flame-retardant: Constructed with materials designed for safety.
- Visual Window: Offers a clear indication of the breaker's status (e.g., ON/OFF/Tripped).
3.2 Component Identification

Description: This image identifies the key parts of the circuit breaker:
- - INPUT / + INPUT: Terminals for connecting the negative and positive DC power supply.
- BRAND: GEYA.
- MODEL NUMBER: GYM9H-125 DC C125.
- RATED CURRENT: Indicates the maximum continuous current the breaker can carry (e.g., 500VDC).
- WIRING DIAGRAM: A simplified internal wiring schematic.
- OPERATING HANDLE: Used to manually switch the breaker ON or OFF.
- FASTENING SCREWS: Used to secure wiring connections.
3.3 Product Overview Video
Description: This video provides a visual overview of the GEYA GYM9H-DC DC Circuit Breaker, demonstrating its features and typical applications.
4. Specifications
| Parameter | Value |
|---|---|
| Brand Name | GEYA |
| Model Number | GYM9H-125DC |
| Type | Moulded Case Circuit Breaker |
| Rated Current (In) | 63A, 80A, 100A, 125A |
| Rated Voltage (Ue) | 1P: 250VDC; 2P: 500VDC; 3P: 750VDC; 4P: 1000VDC |
| Poles | 1P, 2P, 3P, 4P |
| Rated Ultimate Short-Circuit Breaking Capacity (Icu) | 6000A |
| Rated Making Short-Circuit Breaking Capacity (Ics) | 6000A |
| Working Frequency | 50/60Hz |
| Mechanical Life | 10000 times |
| Rated Impulse Withstand Voltage (Uimp) | 4kV |
| Maximum Wiring Capacity | 35mm² |
| Standard | IEC/EN60947, GB/T 14048.2 |
| Certification | CE |
| Is Smart Device | Yes |
| Origin | Mainland China |
5. Setup and Installation
5.1 Physical Dimensions

Description: The 2-pole model has a height of 87mm, a width of 35.6mm, and a depth of 74mm. Dimensions for 1P, 3P, and 4P models will vary in width accordingly. Ensure adequate space for installation and wiring.
5.2 DC Wiring Diagram

Description: This diagram shows the standard DC wiring connection. The positive (+) DC power supply connects to the top right terminal, and the negative (-) DC power supply connects to the top left terminal. The DC load is connected to the corresponding output terminals at the bottom, maintaining polarity.
5.3 Multi-Pole Wiring Configurations
The circuit breaker supports various pole configurations. Always ensure correct polarity (L+ for positive, L- for negative) and proper connection for each pole.
- 1P (Single Pole): Connect L+ to the input and L- to the output of the single pole.
- 2P (Double Pole): Connect L+ to one pole and L- to the other pole.
- 3P (Triple Pole): Connect L+ to one pole, L- to another, and the third pole can be used for another positive or negative line depending on the system design.
- 4P (Quadruple Pole): Connect L+ and L- across the four poles as required by the system.
Refer to the detailed wiring diagrams in the official user manual PDF for specific multi-pole configurations.
5.4 Installation Steps
- Mounting: Securely mount the circuit breaker onto a standard 35mm DIN rail in an appropriate enclosure.
- Wiring Input: Connect the DC power supply cables to the upper terminals of the circuit breaker. Ensure the positive (+) cable connects to the terminal marked '+' and the negative (-) cable connects to the terminal marked '-'.
- Wiring Output: Connect the DC load cables to the lower terminals of the circuit breaker, matching polarity (+ to +, - to -).
- Secure Connections: Use a screwdriver to firmly tighten all fastening screws on the terminals to prevent loose connections, which can cause overheating or arcing.
- Verify: Double-check all connections for correct polarity and tightness before restoring power.
6. Operating Instructions
The GEYA DC MCB is operated via its front-mounted handle.
- To Turn ON: Push the operating handle upwards to the 'ON' position.
- To Turn OFF: Push the operating handle downwards to the 'OFF' position.
- Tripped State: If an overload or short circuit occurs, the circuit breaker will automatically trip, moving the handle to an intermediate or 'OFF' position. Before resetting, identify and resolve the fault.
- Resetting: After clearing the fault, push the handle fully to the 'OFF' position, then push it upwards to the 'ON' position to restore power.
7. Maintenance
- Regular Inspection: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
- Cleaning: Keep the circuit breaker clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Terminal Tightness: Re-check terminal screw tightness periodically, especially after initial installation and during routine system checks.
- No User-Serviceable Parts: The circuit breaker contains no user-serviceable parts. Do not attempt to open or repair the unit. Replace the unit if it is damaged or malfunctioning.
8. Troubleshooting
- Circuit Breaker Trips Frequently:
- Cause: Overload or short circuit in the protected circuit.
- Solution: Disconnect all loads and check for short circuits in the wiring or faulty equipment. Reduce the load if it exceeds the breaker's rating. - No Power to Load When Breaker is ON:
- Cause: Loose wiring connection, internal fault in the breaker, or upstream power issue.
- Solution: Check all wiring connections for tightness. Verify the input power supply. If the breaker is suspected to be faulty, it must be replaced by a qualified electrician. - Breaker Does Not Stay ON:
- Cause: Persistent overload or short circuit.
- Solution: Do not force the breaker ON. Investigate and resolve the underlying fault in the circuit.
9. User Tips
- Always ensure the wire gauge used for connections is appropriate for the rated current of the circuit breaker to prevent overheating.
- In DC systems, strict adherence to polarity (+ to + and - to -) is crucial for proper operation and safety.
- Consider the ambient temperature of the installation environment, as it can affect the tripping characteristics of the circuit breaker. Refer to the temperature compensation table in the full user manual for details.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official GEYA website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.
For more detailed technical specifications and performance characteristics, please refer to the official user manual PDF: GEYA GYM9H-125DC User Manual (PDF).