HALNZIYE M12

Contents

HALNZIYE M12 Thermal Paste User Manual

Model: M12 | Brand: HALNZIYE

1. Introduction

The HALNZIYE M12 Thermal Paste is a high-performance thermal conductive grease designed to enhance heat transfer between your CPU/GPU and their respective heatsinks. Utilizing advanced molecular nanotechnology, this paste ensures efficient cooling for a wide range of electronic devices, from gaming PCs and consoles to industrial applications.

This manual provides essential information on the product's features, specifications, proper installation, and maintenance to ensure optimal performance and longevity.

2. Product Features

  • High Thermal Conductivity: Rated at 12.4 W/MK for superior heat dissipation.
  • Molecular Nanoparticles: Advanced composition for efficient heat transfer.
  • Durable: Designed for long-lasting performance, up to 5 years.
  • Safe and Efficient: Non-toxic and optimized for performance.
  • Conductive Insulation: Electrically non-conductive to prevent short circuits.
  • Easy to Apply: Smooth consistency for simple application.
Infographic detailing features of M12 thermal paste: High Thermal Conductivity, Molecular Nanoparticles, Durable (5 years), Safe and Efficient, Conductive Insulation, Easy to Scribble.
Key features of HALNZIYE M12 Thermal Paste.

3. Package Contents

Depending on the variant purchased, your package will contain:

  • HALNZIYE M12 Thermal Paste (available in 1g, 4g, 8g, 15g syringes or 30g jar)
  • Application Spatula (typically included with syringes)
HALNZIYE M12 Thermal Paste syringes in 1g, 4g, 8g, 15g sizes and a 30g jar, along with an application spatula. Spatula dimensions: 8cm/3.15in. Syringe width: 1.5cm/0.59in.
HALNZIYE M12 Thermal Paste variants and included spatula.
Close-up of a 1g M12 thermal paste syringe and a black application spatula.
Example of 1g M12 thermal paste syringe with spatula.

4. Specifications

Attribute Value
Brand Name HALNZIYE
Model Number M12
Type Thermal Grease
Thermal Conductivity 12.4 W/MK
High-concerned chemical None
Durability Up to 5 years
Origin Mainland China
Typical Package Weight (1g) 0.015 kg
Typical Package Dimensions (1g) 18cm x 11cm x 2cm

5. Setup and Installation

Follow these steps for proper application of the thermal paste to ensure maximum cooling performance:

  1. Clean Surfaces: Ensure that the surfaces of the CPU/GPU (Integrated Heat Spreader - IHS) and the heatsink (cooler base) are thoroughly clean. Remove any old thermal paste residue using a lint-free cloth and isopropyl alcohol (90% or higher). Allow surfaces to dry completely.

    M12 Thermal Paste being applied to a CPU, illustrating high performance cooling.
    Applying thermal paste for high performance cooling.
  2. Apply Thermal Paste: Apply a small amount of HALNZIYE M12 thermal paste to the center of the CPU/GPU IHS. The goal is to form a thin, uniform layer when the heatsink is installed. Common application methods include a pea-sized dot, a line, or spreading a thin layer with the included spatula.

    Note: A thin, even layer is crucial for optimal heat transfer. Avoid applying too much, as this can hinder performance.

  3. Install Heatsink: Carefully place the heatsink onto the CPU/GPU, ensuring it is aligned correctly. Apply even pressure as you secure the heatsink according to its manufacturer's instructions. This pressure will spread the thermal paste evenly across the contact surface.

    Do not lift and re-seat the heatsink after initial contact, as this can create air bubbles and reduce effectiveness.

Infographic showing the wide scope of application for M12 thermal paste, including CPU, GPU, Video Memory Chips, 5G Chips, LED modules, Semiconductors, Transformer, DC modules, Communication Electronics, Household appliances, Automotive Electronics, and Power Station.
HALNZIYE M12 Thermal Paste is suitable for various electronic components.

6. Operating Instructions

Once the thermal paste is applied and the heatsink is securely installed, the system is ready for operation. The thermal paste will begin to conduct heat effectively as soon as the system is powered on and components generate heat. No special break-in period is required, though optimal performance may be observed after a few hours of use as the paste settles.

7. Maintenance

Thermal paste generally does not require frequent reapplication. However, it is recommended to check and potentially reapply thermal paste under the following circumstances:

  • When removing and reinstalling the heatsink (e.g., for cleaning or component upgrades).
  • If you notice a significant increase in CPU/GPU temperatures during normal operation.
  • Every 3-5 years, as the paste may dry out or degrade over time, even with its stated durability.

Always clean the old thermal paste completely before applying a new layer.

8. Troubleshooting

If you experience higher-than-expected temperatures after applying the thermal paste, consider the following:

  • Incorrect Application: Ensure the paste was applied evenly and thinly. Too much or too little paste, or uneven spread, can reduce efficiency.
  • Improper Heatsink Installation: Verify that the heatsink is securely mounted and making full, even contact with the CPU/GPU. Check for any obstructions or loose screws.
  • Air Bubbles: Lifting and re-seating the heatsink after initial contact can trap air, which acts as an insulator. Reapply the paste if this occurred.
  • Insufficient Cleaning: Residual old thermal paste or debris can hinder heat transfer. Ensure surfaces are spotless before application.
  • Heatsink/Fan Issues: Confirm that your heatsink fan is spinning correctly and that the heatsink itself is free of dust buildup.

9. User Tips

  • Users have reported significant temperature drops (e.g., 10-20°C) on laptops after applying M12 thermal paste.
  • The paste has a good consistency, making it easy to apply and spread evenly, similar to other premium thermal compounds.
  • While the syringe/jar size might appear small, a little goes a long way. Ensure you check the weight (1g, 4g, 8g, 15g, 30g) to match your needs.
  • Proper application is key to achieving the stated performance. Take your time to clean surfaces and apply a thin, even layer.

10. Frequently Asked Questions (FAQ)

Q: How often should I reapply thermal paste?
A: It's generally recommended to reapply thermal paste every 3-5 years, or whenever you remove your heatsink for maintenance or upgrades. If you notice a significant increase in temperatures, it might be time for a reapplication.
Q: Is HALNZIYE M12 thermal paste electrically conductive?
A: No, the M12 thermal paste is electrically non-conductive. This ensures safety and prevents any risk of short-circuiting your components.
Q: What is the shelf life of the thermal paste?
A: When stored properly in a cool, dry place with the cap securely on, the M12 thermal paste has a durability of up to 5 years.
Q: Can I use this thermal paste on game consoles like the PS5?
A: Yes, the HALNZIYE M12 thermal paste is suitable for use on game consoles, including the PS5, as well as PCs, laptops, and other electronic devices requiring efficient thermal management.
Q: What is the best way to clean old thermal paste?
A: Use a lint-free cloth or cotton swab lightly dampened with isopropyl alcohol (90% or higher) to gently wipe away old thermal paste from both the CPU/GPU and heatsink surfaces. Ensure no residue remains and allow the surfaces to dry completely before applying new paste.

11. Warranty and Support

For any product-related inquiries, technical support, or warranty information, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional resources, you may refer to the official user manual (PDF) if available: View User Manual (PDF)

© 2024 HALNZIYE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.