Unity FAST FTC OMNI Magnifier Riser Mount

Contents

Unity FAST FTC OMNI Magnifier Riser Mount User Manual

Model: FAST FTC OMNI Magnifier Riser Mount

1. Safety Information

ATTENTION: Not suitable for children under 14 years.

WARNING! TO AVOID DANGER OF SUFFOCATION, KEEP AWAY FROM BABIES AND CHILDREN. DO NOT USE IN CRIBS, BEDS, OR PLAY-PENS.

This product is intended for adult use only (Ages: 14 years +).

For proper disposal of packaging materials, please separate and deposit them in the appropriate recycling bin.

2. Product Overview

The Unity FAST FTC OMNI Magnifier Riser Mount is a tactical accessory designed to elevate and provide quick deployment for various magnifiers on Picatinny rail systems.

Key Features:

  • Type: Rifle accessory
  • Guide Type: Picatinny
  • Material: High-quality Aluminum alloy (6068 AL) with CNC technology
  • Base: QD (Quick Detach) Lever for rapid attachment and detachment
  • Compatibility: Designed to fit 20mm Picatinny Rails
  • Magnifier Compatibility: G23, G30, G33, G43, G45, JULIET 3X, JULIET 4X, JULIET MICR3X, JULIET MICR5X, VMX-3T, Micro 3X, Micro 6X, 3X MAG-C
Magnifier Mount Fitment and Material Details
Image: Details on magnifier compatibility and construction materials (6068 AL, CNC tech, Real Steel components).

3. Setup and Installation

Follow these steps to properly install your Unity FAST FTC OMNI Magnifier Riser Mount:

  1. Attach to Picatinny Rail: Position the mount onto your 20mm Picatinny rail. Engage the QD lever mechanism to secure the mount firmly to the rail. Ensure the mount is seated correctly and does not wobble.
  2. Mount Magnifier: Align your compatible magnifier (e.g., Eotech G33, Juliet 3X) with the mounting holes on the riser. Use the provided screws to attach the magnifier to the mount.
  3. Secure Screws: Tighten all screws evenly until snug. Do not overtighten.
Magnifier Mount Assembly Diagram
Image: Visual guide for attaching the magnifier to the riser mount. Note the warning: Do not adjust Pivot Bolt or disassemble mount. Doing so will void warranty.

IMPORTANT: Do not adjust the Pivot Bolt or attempt to disassemble the mount. Doing so will void the product warranty.

2.91 Riser with Adjustment Tool
Image: The 2.91 Riser mount shown with an adjustment tool, likely for the QD lever tension.

4. Operating Instructions

  • Quick Detach (QD) Lever: To attach or detach the mount from your Picatinny rail, operate the QD lever. Ensure it is fully engaged for a secure fit.
  • Flip-To-Center (FTC) Mechanism: The mount features a flip-to-center mechanism, allowing you to quickly deploy your magnifier into position behind your primary optic or flip it out of the way when not needed.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that may damage the finish.
  • Inspection: Periodically inspect all screws and the QD lever for tightness. Ensure no components are loose or damaged.
  • Lubrication: Lightly lubricate moving parts of the QD lever if necessary, using a small amount of appropriate lubricant.

WARNING: As noted in the assembly instructions, do not attempt to adjust the pivot bolt or disassemble the mount, as this will void the warranty and may compromise the integrity of the product.

6. Troubleshooting

  • Mount feels loose on rail: Ensure the QD lever is fully engaged and tightened. If there is still play, check the rail for proper specifications (20mm Picatinny).
  • Magnifier wobbles or falls off: Verify that the screws attaching the magnifier to the mount are securely tightened. If using a heavier magnifier, ensure it is within the recommended weight limits for the mount.
  • Difficulty operating the flip mechanism: Check for any obstructions. If the mechanism feels stiff, a small amount of lubricant on the pivot points may help.

7. Specifications

Feature Detail
Product Name Magnifier Mount
Type Rifle Accessory
Material Aluminum alloy (6068 AL)
Guide Type Picatinny
Base QD Lever
Fitment 20mm Picatinny Rail
Compatible Magnifiers G23, G30, G33, G43, G45, JULIET 3X, JULIET 4X, JULIET MICR3X, JULIET MICR5X, VMX-3T, Micro 3X, Micro 6X, 3X MAG-C
Package Weight 0.2 kg
Package Dimensions (L x W x H) 21 cm x 15 cm x 10 cm

Dimensions:

  • Magnifier Riser Mount (e.g., 2.26 variant):
    • Height: 95.3mm
    • Width: 21mm
    • Depth: 37.3mm
    • Mounting Hole Spacing: 4.8mm, 5mm, 24.9mm
    • Overall Mounting Width: 45.4mm
  • Picatinny Rail (if applicable):
    • Length: 84.4mm
    • Height: 22.3mm
    • Width: 21mm
    • Base Width: 29.5mm
    • Base Length: 52.4mm
Magnifier Mount Dimensions
Image: Detailed dimensions for the magnifier riser mount, including height, width, and mounting hole measurements.
Picatinny Rail Dimensions
Image: Detailed dimensions for the Picatinny rail component.

8. User Tips

  • Check for Play: Some users have noted slight play in the pivots. Regularly check the tightness of all fasteners and the QD lever to ensure a secure fit.
  • Magnifier Weight: If using a particularly heavy magnifier, be aware that some mounts may exhibit more movement. Ensure your magnifier is securely attached and consider the overall weight distribution.
  • Intended Use: This product is generally well-suited for airsoft or .22LR applications. For more demanding operational purposes, users should thoroughly test the mount's stability and retention with their specific setup.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation. A user manual in PDF format is available for download:

View User Manual (PDF)

For further assistance, please contact your retailer or the manufacturer's support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.