1. Introduction
Thank you for choosing the GEYA GYM9H-125 Mini Circuit Breaker. This device is designed to provide reliable overload and short-circuit protection for electrical circuits. It is suitable for use in industrial, commercial, high-rise buildings, and residential installations. This manual provides essential information for the safe and effective installation, operation, and maintenance of your circuit breaker.

Figure 1: GEYA GYM9H-125 Mini Circuit Breaker (1P, 2P, 3P, 4P models)
2. Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or injury:
- Installation and maintenance should only be performed by qualified electricians.
- Ensure the main power supply is disconnected before any installation, wiring, or maintenance work.
- Verify that the circuit breaker's specifications (voltage, current) match the requirements of your electrical system.
- Do not operate the circuit breaker with wet hands.
- Do not bypass or tamper with the circuit breaker's protective functions.
- Ensure proper grounding where required.
3. Setup and Installation
3.1 Mounting
The GEYA GYM9H-125 Mini Circuit Breaker is designed for standard DIN rail mounting. Ensure the DIN rail is securely fastened within the electrical enclosure.
3.2 Wiring
Follow these steps for proper wiring:
- Ensure all power is OFF at the main supply.
- Connect the incoming DC power supply to the upper terminals of the circuit breaker.
- Connect the DC load to the lower terminals of the circuit breaker.
- Tighten all terminal screws securely to prevent loose connections, which can cause overheating.
- The wiring capacity for terminals is 6-50mm².

Figure 2: Example Wiring Diagram (MCB and RCCB connection)
Video 1: Circuit Breaker Wiring Demonstration. This video demonstrates connecting DC power supply to the upper terminals and DC load to the lower terminals of a similar GEYA DC circuit breaker.
4. Operating Instructions
The circuit breaker operates with a simple toggle switch:
- ON Position (Up): The circuit is closed, and power flows through.
- OFF Position (Down): The circuit is open, and power is disconnected.
- Tripped Position (Middle): If an overload or short-circuit occurs, the breaker will automatically trip to the middle position, disconnecting power to protect the circuit.
The circuit breaker features a contact position indicator for clear status visualization.

Figure 3: Multiple Protections provided by the GEYA Mini Circuit Breaker, including Overload Protection, Short-circuit Protection, Control Isolation, Safe and Flame-retardant housing, and a Visual Window.
5. Maintenance
The GEYA GYM9H-125 Mini Circuit Breaker is designed for long-term, maintenance-free operation under normal conditions. However, periodic checks are recommended:
- Visual Inspection: Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
- Terminal Tightness: Ensure all terminal screws remain tight.
- Cleaning: Keep the circuit breaker clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- No User-Serviceable Parts: Do not attempt to open or repair the circuit breaker. If it malfunctions, it should be replaced by a qualified professional.
6. Troubleshooting
- Circuit Breaker Trips Frequently: This indicates an overload or short-circuit condition in the protected circuit. Identify and rectify the cause (e.g., too many devices on one circuit, faulty appliance, wiring issue) before resetting the breaker.
- Circuit Breaker Does Not Reset: If the breaker does not stay in the ON position after being tripped, there might still be a fault in the circuit, or the breaker itself might be damaged. Do not force it. Consult a qualified electrician.
- No Power to Circuit (Breaker ON): Check all connections to ensure they are secure. If the issue persists, there may be a fault elsewhere in the circuit or the breaker may be defective.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | GYM9H-125 MCB |
| Brand Name | GEYA |
| Rated Voltage (Ue) | 240/415V - 230/400V AC |
| Rated Current (In) | 63A, 80A, 100A, 125A |
| Breaking Capacity | 10000A |
| Rated Insulation Voltage (Ui) | 500V |
| Rated Impulse Withstand Voltage (Uimp) | 4KV |
| Working Frequency | 50/60Hz |
| Poles | 1P, 2P, 3P, 4P |
| Tripping Curves | B, C, D |
| Mechanical Life | 20000 times |
| Electrical Life | 10000 times |
| Wiring Capacity | 6-50mm² |
| Certification | CE |
7.1 Dimensions

Figure 4: Outline Overall and Installing Dimensions (in mm)
- Width per Pole (1P): 18mm
- Width (2P): 36mm
- Width (3P): 54mm
- Width (4P): 72mm
- Depth: 45mm
- Height: 89.5mm
7.2 Performance Characteristics
The circuit breaker's tripping characteristics are defined by its tripping curves (B, C, D) and are influenced by ambient temperature. Refer to the manufacturer's full datasheet for detailed tripping curves and temperature compensation factors.
8. User Tips
- Proper Sizing: Always ensure the circuit breaker's rated current matches the circuit's requirements to provide effective protection without nuisance tripping.
- Clear Labeling: Label your circuit breakers clearly in your distribution board to easily identify which circuit each breaker protects.
- Regular Checks: Periodically test your Residual Current Circuit Breakers (RCCBs) if installed alongside MCBs, as shown in the wiring diagram, to ensure they are functioning correctly.
9. Warranty and Support
GEYA products are manufactured to high-quality standards and come with a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or further assistance, please contact your retailer or the official GEYA support channels.
For detailed product documentation, you may refer to the official user manual PDF: GEYA GYM9H-125 User Manual (PDF).