Wuzhi Audio ZK-HT21-3G

Contents

Wuzhi Audio ZK-HT21-3G TDA7498E 2.1 Channel Bluetooth Audio Amplifier Board User Manual

Model: ZK-HT21-3G

1. Introduction

Thank you for choosing the Wuzhi Audio ZK-HT21-3G TDA7498E 2.1 Channel Bluetooth Audio Amplifier Board. This module is designed to provide high-quality stereo audio amplification with a dedicated subwoofer output, offering versatile connectivity options including Bluetooth, AUX, and USB. It features APP control for convenient adjustments and multiple protection mechanisms for reliable operation. This manual will guide you through the setup, operation, and maintenance of your amplifier board.

2. Safety Information

  • Ensure the power supply voltage is within the specified range (DC 15-36V). Using an incorrect voltage can damage the device.
  • Always disconnect power before making any connections or disconnections.
  • Avoid short-circuiting the output terminals.
  • Do not expose the device to moisture, water, or extreme temperatures.
  • Handle the PCB with care to avoid damaging components.
  • Ensure proper ventilation to prevent overheating, especially during high-power operation.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1x ZK-HT21-3G Power Amplifier Board
  • 1x Upper Cover Board
  • 1x Lower Cover Board
  • Knobs for potentiometers
  • M2*4 screws
  • M2*18 copper pillars
  • M2*5+4 copper pillars
  • 1x Screwdriver
  • 1x 2-pin terminal connector
Package Contents of ZK-HT21-3G Amplifier Board

Figure 3.1: All components included in the package. The shell needs to be assembled by yourself.

4. Product Overview

Familiarize yourself with the various components and controls of the amplifier board.

ZK-HT21-3G Amplifier Board Front Panel Functions

Figure 4.1: Front panel layout and function of controls.

  • Power Input (DC15-36V): 5.5x2.1DC plug and 2P terminal.
  • Audio Input (BT | AUX): Bluetooth and Auxiliary input.
  • Left Channel Output
  • Right Channel Output
  • Subwoofer Output
  • USB_IN: USB input interface for flash drives.
  • SUBWOOFER FREQ (20-200Hz): Adjusts the subwoofer cutoff frequency.
  • SUBWOOFER VOLUME: Adjusts the subwoofer output level.
  • R&L CHANNEL TREBLE: Adjusts the treble for left and right channels.
  • R&L CHANNEL BASS: Adjusts the bass for left and right channels.
  • MAIN C/VOL (Dial Wheel Button): Total volume control and mode switch.
ZK-HT21-3G Amplifier Board Internal Details

Figure 4.2: Internal components including low noise operational amplifier, energy storage capacitor, filter circuit, silent fan, and antenna base.

5. Setup

5.1. Assembly

The amplifier board comes with a protective shell that needs to be assembled.

ZK-HT21-3G Amplifier Board Assembly Diagram

Figure 5.1: Step-by-step assembly of the amplifier board shell.

  1. Attach the M2*18 copper pillars to the PCB.
  2. Place the lower cover board onto the copper pillars and secure with M2*4 screws.
  3. Attach the M2*5+4 copper pillars to the PCB.
  4. Place the upper cover board onto the copper pillars and secure with M2*4 screws.
  5. Install the knobs onto the potentiometers.

5.2. Wiring Connections

Ensure the power is OFF before making any connections.

  • Power Supply: Connect a DC 15-36V power adapter to the DC jack (5.5x2.1mm) or use the 2-pin terminal connector.
  • Speakers: Connect your left, right, and subwoofer speakers to their respective output terminals. Ensure correct polarity (+/-). Compatible speakers are 30-200W, 4-8 ohms.
  • Audio Input: Connect your audio source via AUX (3.5mm jack) or use Bluetooth. For USB input, insert a USB flash drive.
ZK-HT21-3G Subwoofer Expansion Wiring

Figure 5.2: Subwoofer expansion wiring diagram for connecting to a HiFi amp.

5.3. Antenna Installation (Optional)

For improved Bluetooth range, an external 2.4G antenna can be welded to the antenna base on the PCB. The antenna and pedestal should be purchased separately.

ZK-HT21-3G Antenna Welding Example

Figure 5.3: Examples of antenna base welding and antenna welding.

5.4. Qualcomm BT Module Modification (Advanced)

The board supports an optional ZK-QCC Qualcomm decoding board for enhanced Bluetooth audio. When using this expansion, the dial switch on the main board must be turned to the OFF position. Note that after this modification, the USB drive cannot be used, and Bluetooth and AUX will only utilize the Qualcomm board.

ZK-HT21-3G Qualcomm BT Modification Diagram

Figure 5.4: Wiring diagram for modifying with a ZK-QCC Qualcomm decoding board.

6. Operating Instructions

6.1. Audio Input Modes

The amplifier module supports three audio input modes: Bluetooth (BT), AUX, and USB flash disk. The module automatically switches to the input mode of an inserted audio cable or USB flash drive. Bluetooth mode has the lowest priority. You can also use the dial wheel button to manually switch modes.

6.2. Dial Wheel Button Functions

ZK-HT21-3G Dial Wheel Button Controls

Figure 6.1: Functions of the dial wheel button.

  • Press in the middle: Short press for pause/play; Long press to switch mode (USB/BT/AUX).
  • Turn to the left: Short press for previous song; Long press for volume down (-).
  • Turn to the right: Short press for next song; Long press for volume up (+).

6.3. Adjusting Volume

  • Total Volume: Use the MAIN C/VOL dial wheel button. Turning right increases volume, turning left decreases it. This affects all channels (left, right, subwoofer).
  • Subwoofer Volume: Use the SUBWOOFER VOLUME knob. Turning right increases subwoofer volume, turning left decreases it.

6.4. Adjusting Treble and Bass

  • R&L Channel Bass: Use the R&L CHANNEL BASS knob. Turning right enhances bass, turning left attenuates it. Middle position is neutral.
  • R&L Channel Treble: Use the R&L CHANNEL TREBLE knob. Turning right enhances treble, turning left attenuates it. Middle position is neutral.

Note: If treble and total volume are adjusted to maximum simultaneously, it may trigger power amplifier protection or cause sound jamming. Reduce treble or total volume if this occurs.

6.5. Adjusting Subwoofer Frequency

Use the SUBWOOFER FREQ knob to control the subwoofer's cutoff frequency (20Hz-200Hz). Turning right increases the cutoff frequency, allowing more high-frequency content to the subwoofer, making its sound larger. Turning left decreases it.

6.6. APP Control

The Wuzhi Audio APP supports both Android and iOS devices, allowing for convenient control and adjustment of amplifier settings.

Wuzhi Audio APP Interface for Android and iOS

Figure 6.2: Wuzhi Audio APP interface on Android and iOS devices.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the amplifier board. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure the amplifier board has adequate airflow, especially during prolonged high-power use, to prevent overheating. The built-in silent fan helps dissipate heat.
  • Storage: Store the device in a cool, dry place away from direct sunlight and moisture when not in use.

8. Troubleshooting

ZK-HT21-3G Amplifier Board Q&A Section

Figure 8.1: Common questions and answers regarding the amplifier board.

  • No Sound or Low Volume:
    • Ensure the power supply is sufficient (voltage and current). A weak power supply can lead to low output or distortion.
    • Check all audio input and speaker connections.
    • Verify that the correct input mode is selected.
    • Adjust all volume controls (main, subwoofer, source device).
  • Sound Distortion or Turbidity:
    • The power supply ripple might be too large. Use a power supply with low ripple.
    • The power supply voltage might be too low or current too small. Ensure adequate power (e.g., 18V/19V/24V with 8A+, or 32V/10A). For maximum output, consider 36V/10A with 160W-200W 4Ω speakers.
    • If the volume is too high for the speaker's capacity, reduce it.
  • Sound Lag or Intermittent Output:
    • This can occur if the input power is insufficient. Replace with a more powerful power supply.
    • If the power supply is too strong, the amplifier might overheat and trigger protection. Reduce power usage or enhance heat dissipation.
  • Humming or Noise:
    • Check for ground loops.
    • Ensure all cables are properly shielded and connected.
    • A power supply with large ripple can cause noise.
  • Overheating:
    • Ensure proper ventilation around the board.
    • If operating at high power, ensure the heatsink is clear and the fan is functioning.

9. Specifications

ZK-HT21-3G Amplifier Board Product Parameters

Figure 9.1: Detailed product parameters.

Parameter Value
Product Name2.1 channel audio amplifier module with Tone
Product ModelZK-HT21 3G
BT Version5.0 (no shielding, 15 meters)
Audio InputAUX + BT + USB (Dial wheel button toggles song and mode)
Channel Count2.1 (Left channel + Right channel + Subwoofer)
Amplifier ChipTDA7498E
Adaptive Power SupplyDC 15~36V (Undervoltage protection below 9V, 12V also supported)
Compatible Speaker30-200W, 4-8 ohms
Output Power (R&L Channel)Max 160W
Output Power (Subwoofer)Max 220W
Protection MechanismAnti reverse connection, undervoltage, overheating, overcurrent, short circuit protection
Product Size145 * 126 * 28mm

10. User Tips

  • For optimal sound quality, ensure your power supply is robust and matches the amplifier's requirements.
  • When connecting a subwoofer, ensure its power rating is appropriate for the amplifier's 220W output. Using a 200W subwoofer is generally acceptable, but avoid exceeding this significantly to prevent damage or poor performance.
  • Experiment with the subwoofer frequency knob to find the best blend with your main speakers.
  • If you experience any distortion, first check your power supply and then reduce the volume.

11. Warranty and Support

For any issues, questions, or support needs regarding your Wuzhi Audio ZK-HT21-3G amplifier board, please contact the seller or manufacturer directly through your purchase platform. Please refer to your purchase documentation for specific warranty terms and contact information.

© 2023 Wuzhi Audio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.