1. Product Information
This Blower Resistor Speed Control Module Fan Module (Model: 8107300K00) is designed for Great Wall Haval H3, H5, and Wingle GWM vehicles. It is a flexible and easy-to-use component, manufactured according to factory specifications to ensure high quality and durability.
Built to strict quality control standards, this module is resistant to damage and engineered for an extended service life. It offers stable performance and high reliability, serving as a perfect replacement for original worn-out components. Constructed from a combination of metal and plastic, this auto part guarantees durability and reliability, ensuring a seamless fit and optimal performance within your vehicle's HVAC system.
2. Safety & Warnings
- This product is intended for adult use only.
- Keep out of reach of children and pets to prevent accidental injury or ingestion.
- Always check if the installation is correct before operating the vehicle.
- If you observe abnormal noise or equipment error after installation, immediately stop the vehicle and investigate the issue.
- Follow all instructions for proper use; misuse may cause harm.
- Store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight.
3. Package Contents
- 1 x Blower Fan Module
Note: Only the listed package content is included; other products shown in promotional images are not.
4. Setup & Installation
This Blower Resistor Speed Control Module is a replacement part for specific vehicle models. Installation typically involves accessing the vehicle's HVAC system, locating the existing blower module, disconnecting wiring, removing mounting screws, and installing the new module in reverse order.
Before First Use:
- Ensure the product is free from any visible damage before installation.
- Verify that the part number (8107300K00) matches your vehicle's requirements.
- It is highly recommended to consult your vehicle's specific service manual or seek professional assistance for proper installation to ensure safety and correct functionality.
- After installation, perform a functional check of the blower fan at all speed settings.
Figure 1: Front view of the Blower Resistor Speed Control Module.
Figure 2: Bottom view showing mounting holes and electrical connector.
5. Operating Instructions
This Blower Resistor Speed Control Module functions as an integral part of your vehicle's heating, ventilation, and air conditioning (HVAC) system. It regulates the speed of the blower motor, allowing you to control the airflow from the vents.
Once correctly installed, the module operates automatically in conjunction with your vehicle's climate control settings. Adjusting the fan speed knob or buttons on your vehicle's dashboard will send signals to this module, which then adjusts the power supplied to the blower motor to achieve the desired fan speed.
6. Maintenance
The blower resistor module is designed for long-lasting performance and typically requires minimal maintenance once installed. However, to ensure its longevity and optimal function:
- Regular Inspection: During routine vehicle maintenance, a visual inspection of the module and its connections can help identify any potential issues early.
- Keep Area Clear: Ensure the area around the blower motor and module is free from debris, leaves, or other obstructions that could impede airflow or cause overheating.
- Proper Storage (if not installed immediately): If the module is not installed immediately, store it in a dry, cool place, away from direct sunlight and extreme temperatures, and out of reach of children.
7. Troubleshooting
If you experience issues with your vehicle's blower fan after installing this module, consider the following troubleshooting steps:
- Fan Not Working at All:
- Check the vehicle's fuse for the blower motor.
- Verify all electrical connections to the module are secure and free from corrosion.
- Ensure the blower motor itself is functional (a faulty motor can prevent the module from working).
- Fan Only Works on High Speed:
- This is a common symptom of a faulty blower resistor or module. If this occurs, the module may need to be replaced.
- Abnormal Noise or Equipment Error:
- Immediately stop the vehicle.
- Re-check the installation for any loose components or incorrect seating.
- Inspect the blower motor for any foreign objects or damage.
- Intermittent Fan Operation:
- Check for loose wiring or intermittent electrical connections.
- Inspect for signs of overheating on the module or its connectors.
If problems persist after basic troubleshooting, it is advisable to consult a qualified automotive technician.
8. Specifications
| Product Name | A14U-Speed Control Module Blower Resistor Fan Module |
| Model Number | 8107300K00 |
| Compatibility | Great Wall Haval H3, H5, Wingle GWM |
| Material | Metal + Plastic |
| Color | As Shown |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Dimensions (approx.) | Length: 10 cm, Width: 4 cm, Height: 6 cm |
| Package Weight (approx.) | 0.117 kg |
| Measurement Error Tolerance | +/- 1-3 cm |
9. User Tips
- Always disconnect the vehicle's battery before attempting any electrical work, including replacing the blower module.
- When replacing, ensure the new module is securely fastened and all electrical connectors are fully seated to prevent intermittent operation or damage.
- If you are unsure about any step of the installation process, it is best to consult a professional mechanic.
10. Manufacturer & Support Information
For technical support or inquiries, please contact the manufacturer or their authorized representative:
Manufacturer:
Taiyuan leiweijing electronic commerce co., ltd
Address: No.9-704 Yiyuan, Miaoqian Community, Shuixiguan Street, Miaoqian Street, Yingze District, Taiyuan, Shanxi, Code: 030000, China
Email: erweichang661@outlook.com
Phone: +86 13612983201
EU Authorized Representative:
Prolinx GmbH
Address: Brehmstr.56, Duesseldorf, 40239, Germany
Email: eu@eulinx.eu
Phone: +49 21131054698
A user manual in PDF format is also available for download: View User Manual (PDF)