XMSJ CD569F260203-1303, CD569F260203-6100

Contents

Instruction Manual

XMSJ Rear Longitudinal Arm Assembly for CHANA Changan UNI-K

Models: Left CD569F260203-1303 (2917300-CR05), Right CD569F260203-6100 (2917400-CR05)

1. Product Overview

This manual provides essential information for the XMSJ Rear Longitudinal Arm Assembly designed for CHANA Changan UNI-K vehicles. The longitudinal arm is a critical component of your vehicle's rear suspension system, responsible for maintaining wheel alignment, stability, and ride comfort. This assembly is manufactured to meet the specific requirements of the CHANA Changan UNI-K, ensuring proper fit and function.

XMSJ Rear Longitudinal Arm Assembly

Figure 1: XMSJ Rear Longitudinal Arm Assembly (Generic View)

Another view of the XMSJ Rear Longitudinal Arm Assembly

Figure 2: XMSJ Rear Longitudinal Arm Assembly (Alternate View)

2. Safety Information

Working on vehicle suspension components requires specialized knowledge and tools. Improper installation can lead to serious safety hazards, including loss of vehicle control. Always prioritize safety and follow these guidelines:

  • Professional Installation Recommended: Due to the critical nature of this component, professional installation by a certified mechanic is strongly recommended.
  • Vehicle Support: Always use appropriate jack stands or a vehicle lift to securely support the vehicle before beginning any work. Never rely solely on a jack.
  • Personal Protective Equipment: Wear safety glasses, gloves, and other appropriate personal protective equipment.
  • Tool Usage: Use only the correct tools for the job and ensure they are in good working condition.
  • Torque Specifications: All fasteners must be tightened to the manufacturer's specified torque values. Refer to your vehicle's service manual for these specifications.
  • Wheel Alignment: After replacing any suspension component, a professional wheel alignment is mandatory to ensure proper vehicle handling and tire wear.

3. Installation

This section provides general guidance for the installation of the rear longitudinal arm assembly. Please note that specific step-by-step instructions are not available in this manual. Always consult your vehicle's official service manual or a qualified mechanic for detailed procedures.

3.1 Identifying Left and Right Parts

The assembly includes distinct left and right components. It is crucial to install the correct part on the corresponding side of the vehicle.

Close-up of Left Rear Longitudinal Arm Assembly with part number 2917300-CR05

Figure 3: Left Rear Longitudinal Arm Assembly (Part Number: CD569F260203-1303 / 2917300-CR05)

Close-up of Right Rear Longitudinal Arm Assembly with part number 2917400-CR05

Figure 4: Right Rear Longitudinal Arm Assembly (Part Number: CD569F260203-6100 / 2917400-CR05)

3.2 General Installation Steps (Consult Service Manual for Details)

  1. Prepare Vehicle: Park the vehicle on a level surface, engage the parking brake, and securely lift the rear of the vehicle using a hoist or jack stands. Remove the rear wheels.
  2. Access Old Component: Locate the existing rear longitudinal arm. It connects the rear axle to the vehicle chassis.
  3. Remove Old Component: Carefully unbolt the old longitudinal arm from its mounting points. Note the orientation and any shims or washers. You may need to support the axle during this process.
  4. Install New Component: Position the new XMSJ longitudinal arm (ensuring it's the correct left or right part) into place. Loosely attach the bolts.
  5. Final Tightening: Once all bolts are in place, lower the vehicle partially (or to ride height if possible) before fully tightening the bolts to the manufacturer's specified torque. This helps prevent bushing preload.
  6. Reassemble: Reinstall the wheels and lower the vehicle completely.
  7. Wheel Alignment: Immediately after installation, have a professional wheel alignment performed.

4. Operation

As a passive mechanical component, the rear longitudinal arm does not have operational controls. Its function is integral to the vehicle's suspension system. After proper installation, you should experience:

  • Improved vehicle stability and handling.
  • Correct rear wheel alignment, contributing to even tire wear.
  • A comfortable and controlled ride.

If you notice any unusual noises, vibrations, or changes in handling after installation, cease driving and have the vehicle inspected by a qualified mechanic immediately.

5. Maintenance

To ensure the longevity and optimal performance of your XMSJ Rear Longitudinal Arm Assembly and overall suspension system, consider the following maintenance tips:

  • Regular Inspection: Periodically inspect the longitudinal arms for signs of damage, corrosion, bent components, or worn bushings. This can be done during routine oil changes or tire rotations.
  • Cleanliness: Keep the suspension components free from excessive dirt, mud, and road salt, which can accelerate corrosion.
  • Check Fasteners: Ensure all mounting bolts remain tight. Over time, vibrations can cause fasteners to loosen.
  • Address Issues Promptly: Any unusual noises (clunking, squeaking), vibrations, or changes in vehicle handling should be investigated by a professional immediately.

6. Troubleshooting

If you experience issues with your vehicle's rear suspension after installing or using the XMSJ Rear Longitudinal Arm Assembly, consider the following common troubleshooting points. Always consult a professional mechanic for accurate diagnosis and repair.

SymptomPossible CauseRecommended Action
Unusual noises (clunking, squeaking) from the rearLoose fasteners, worn bushings, damaged component, improper installation.Inspect all mounting points for tightness. Check bushings for wear. Verify correct part installation. Seek professional inspection.
Poor vehicle handling or instabilityIncorrect installation, improper wheel alignment, damaged component.Verify installation. Get a professional wheel alignment. Inspect for damage.
Uneven tire wear on rear tiresIncorrect wheel alignment, bent suspension component.Get a professional wheel alignment. Inspect suspension components for damage.
Vibrations felt through the vehicleLoose components, unbalanced wheels, damaged suspension.Check all fasteners. Inspect wheels and tires. Seek professional diagnosis.

7. Specifications

AttributeDetail
Brand NameXMSJ
OriginMainland China
Compatible VehicleCHANA Changan UNI-K
Part TypeRear Longitudinal Arm Assembly
Left Part Number(s)CD569F260203-1303, 2917300-CR05
Right Part Number(s)CD569F260203-6100, 2917400-CR05
Package Length40 cm
Package Width25 cm
Package Height15 cm
Package Weight7.0 kg

Note: Detailed material specifications or performance ratings are not available in this document. Please refer to the product packaging or contact the seller for more information.

8. User Tips

No specific user tips or common questions and answers are available for this product at this time. For best results and safety, always ensure professional installation and adhere to your vehicle's maintenance schedule.

9. Warranty & Support

For warranty information, please refer to the terms provided by the seller at the time of purchase. Typically, automotive parts come with a limited warranty against manufacturing defects.

If you have any questions regarding the product, installation, or require technical assistance, please contact the seller directly through the platform where the purchase was made.

Note: The provided 'Item guides & documents' link (PDF) in the product details is for a 'Fuel Cover Lock Actuator Motor of Volvo Tank Door Lock' and is not relevant to this Rear Longitudinal Arm Assembly. Please disregard it for this product.

© 2024 XMSJ. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.