1. Introduction
The PAMPSEE M30 Series LED Headlight Bulbs are designed to provide superior illumination for your vehicle. Utilizing advanced LED technology, these bulbs offer high brightness, energy efficiency, and a long lifespan. They are an environmentally friendly and energy-saving alternative to traditional halogen lamps, ensuring a clearer and safer driving experience.
Key advantages include:
- High Performance: Delivers clear and soft light output with higher luminous intensity and a longer lighting distance.
- High Efficiency: Significantly lower power consumption compared to traditional bulbs for the same brightness level.
- Lightweight & Easy Installation: Constructed from pure aluminum for durability and ease of fitting.
- Advanced Technology: Features high-quality imported LED chips, constant current & voltage regulation drivers, and a long lifespan. Designed for very low start voltage (down to 6V).
2. Installation Guide
Please follow these steps carefully for proper installation of your PAMPSEE LED Headlight Bulbs. Refer to the diagrams below for visual guidance.
- Insert the M3 HEX nut into the designated slot on the LED headlamp (refer to Installation Diagram 1).
- Select the appropriate fixed plate (3). Insert the LED headlamp (1) into the fixed plate, ensuring the installation hole of the fixed plate aligns with the headlamp's slot (refer to Installation Diagram 2).
- Place the fixed nut (5) into the fixed plate's installation hole and secure it with the M3 hex nut, then tighten (refer to Installation Diagram 3).
- Replace the LED headlamp assembly (with the fixed plate) into the original lamp-chimney of your vehicle. The connection method is the same as with the original headlight (refer to Installation Diagram 4).
- Connect the LED headlamp according to the wiring diagram provided in the user manual (a general wiring diagram is shown below).
- Adjust the LED headlamp by moving it forward and backward until the light beam achieves the best effect, then securely fasten the fixed nut (refer to the diagram below).
Installation Diagrams
3. Operation
The PAMPSEE M30 Series LED Headlight Bulbs operate in conjunction with your vehicle's existing headlight system. Once installed, they will activate and deactivate with your vehicle's light controls.
- Brightness: Experience 60000LM per set, providing a significantly brighter output than traditional halogen bulbs.
- Color Temperature: Enjoy a crisp 6000K white light, enhancing visibility and road clarity.
- Beam Pattern: The bulbs are designed to produce a perfect beam pattern with no dark spots and even light distribution.
4. Maintenance
PAMPSEE M30 Series LED Headlight Bulbs are designed for minimal maintenance due to their robust construction and long lifespan.
- Cleaning: Periodically clean the exterior of your headlight assembly to ensure maximum light output. Use a soft cloth and mild cleaning solution.
- Inspection: Regularly check the bulbs for any signs of physical damage or loose connections.
- Lifespan: These LED bulbs boast an impressive lifespan of 80,000 hours, significantly reducing the need for frequent replacements.
- Cooling System: The integrated efficient cooling system (grille heat dissipation and fan cooling) helps maintain optimal operating temperature, contributing to the bulb's longevity.
5. Troubleshooting
The PAMPSEE M30 Series LED Headlight Bulbs are designed with advanced features to minimize common issues. If you encounter problems, consider the following:
- Canbus Error Free: These bulbs feature 99% Canbus error-free technology, preventing flickering, errors, or warning messages on most vehicle dashboards after installation. If an error occurs, ensure proper installation and compatibility with your vehicle's specific Canbus system.
- Radio Interference: The intelligent CANBUS system is designed to solve radio interference issues, ensuring stable operation. If you experience interference, check connections and ensure the bulb is correctly seated.
- No Light Output: Check all electrical connections to ensure they are secure. Verify that the vehicle's light switch is in the correct position.
- Dim Light: Ensure the vehicle's battery voltage is within the operating range (DC9V-16V).
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Pampsee |
| Item Type | Other (LED Headlight Bulb) |
| Wattage | 200W/pair, 100W/bulb |
| Lumen | 60000LM/Set, 30000LM/bulb |
| Color Temperature | 6000K White |
| Voltage | DC9-32V, Fit 12V/24V vehicle |
| Chip Assembly Type | 7035 AES chips |
| Lifespan | 80,000 hours |
| Waterproof Rate | IP68 |
| Operating Temperature | -40 to 80 degree Celsius |
| Certification | E-Mark, CE, FCC, RoHS, KC, ECE |
| Car Model Compatibility | Universal (For Alfa/Mitsubishi/Chevrolet/Renault/Fiat/VAZ/Great Wall/Suzuki, etc.) |
Size Displays for Different Bulb Types
7. Warranty & Support
PAMPSEE M30 Series LED Headlight Bulbs come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product performs as described under normal use.
For detailed information, including additional diagrams and specific wiring instructions, please refer to the official user manual PDF available at PAMPSEE M30 Series User Manual (PDF).
8. User Tips
- Plug and Play: These bulbs are designed for easy plug-and-play installation, often requiring no modification to your vehicle's circuit or dust cover.
- Intelligent Temperature Control: The built-in intelligent temperature control system, featuring a 12000 RPM hydraulic industrial fan, actively dissipates heat. This ensures stable performance and extends the bulb's life, even in varying conditions.
- All-Weather Performance: The IP68 waterproof rating ensures reliable operation in diverse weather conditions, including snowy, rainy, and foggy environments.