Dfiolk RS-001

Contents

Dfiolk LED Wall Light Instruction Manual

Model: RS-001 | Last Updated: 06/02/2026

1. Important Safety Information

Read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury. Keep this manual for future reference.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Supervise children when they are near the product.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture. This product is for indoor use only.
  • Handle with care to avoid cuts or injuries during installation or adjustment.

2. Product Overview

The Dfiolk LED Wall Light is an aluminum alloy indoor lighting fixture with an adjustable angle, suitable for various rooms such as living rooms, bedrooms, and studies. It features energy-efficient LED bulbs and comes in different power and color temperature options.

White Dfiolk LED Wall Light illuminated

Figure 1: White Dfiolk LED Wall Light (example)

Black Dfiolk LED Wall Light illuminated

Figure 2: Black Dfiolk LED Wall Light (example)

3. Installation Instructions

This wall light is designed for wall-mounted installation and requires connection to an AC power source. Professional installation is recommended.

3.1 Package Contents

  • 1 x LED Wall Light
  • 1 x LED Driver
  • Mounting Screws and Wall Anchors
Components of the Dfiolk LED Wall Light including the lamp body, LED driver, and mounting hardware

Figure 3: Included components for installation

3.2 Installation Steps

  1. Safety First: Ensure the main power supply to the installation area is turned off at the circuit breaker before beginning any electrical work.
  2. Marking: Choose a suitable location on the wall. Use the lamp's mounting bracket as a template to mark the drilling points for the screws.
  3. Drilling: Drill holes at the marked points. Insert the wall anchors into the drilled holes.
  4. Mounting Bracket: Secure the mounting bracket to the wall using the provided screws.
  5. Wiring: Connect the household AC power wires to the LED driver's input terminals (typically marked L and N for Live and Neutral). Connect the LED driver's output wires to the lamp's input wires. Ensure all connections are secure and insulated.
  6. Attach Lamp Body: Align the lamp body with the mounting bracket and secure it with the remaining screws.
  7. Restore Power: Once installation is complete and all connections are checked, restore power at the circuit breaker.

4. Operating Instructions

4.1 Turning On/Off

The Dfiolk LED Wall Light is typically controlled by a standard wall switch connected to your household electrical circuit. Flip the wall switch to turn the light on or off.

4.2 Adjusting the Angle

The lamp features a 270-degree adjustable angle. Gently rotate the lamp body to direct the light as desired. This allows for versatile lighting effects, from upward ambient light to downward task lighting.

Diagram showing the 270-degree rotation capability of the Dfiolk LED Wall Light

Figure 4: 270-degree rotation for adjustable lighting

5. Maintenance & Storage

5.1 Cleaning

  • Always turn off the power supply to the lamp before cleaning.
  • Use a soft, lint-free cloth to wipe the lamp body.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.

5.2 Storage

  • If storing the lamp for an extended period, ensure it is kept in a dry place at room temperature (15°C - 35°C).
  • For long-term storage, it is recommended to power on the product every three months to maintain its components.

6. Troubleshooting

If the product does not function as expected, please check the following before contacting support:

  • Power Supply: Ensure the lamp is correctly connected to the AC power source and the wall switch is in the 'ON' position.
  • Wiring: Verify that all electrical connections are secure and properly insulated.
  • Damage: Inspect the lamp for any visible damage. If you notice abnormal heat, smell, smoke, leakage, deformation, or any unusual noise, immediately turn off the power and discontinue use.

7. Technical Specifications

FeatureDetails
Product NameLED Wall Light
Model NumberRS-001
MaterialAluminum
Body Color OptionsWhite, Black
Input VoltageAC 85-265V
Rated Power Options6W, 12W, 18W
Light SourceLED bulbs (included)
Color Temperature OptionsWarm white (3000K), Pure white (4000K), Cold white (6000K)
Luminous Flux249-2000 lumens (depending on wattage)
Lighting Area3-5 square meters
Installation TypeWall Mounted, self-contained
Shade DirectionUp & Down (adjustable)
StyleModern Style
CertificationsCCC, CE, RoHS
Warranty2 Year

7.1 Dimensions (Length x Height x Depth)

  • 6W Model: 16cm x 8cm x 5cm
  • 12W Model: 31cm x 8cm x 5cm
  • 18W Model: 46cm x 8cm x 5cm
Dimensions of the 6W Dfiolk LED Wall Light: 16cm length, 8cm height, 5cm depth

Figure 5: Dimensions for 6W model

Dimensions of the 12W Dfiolk LED Wall Light: 31cm length, 8cm height, 5cm depth

Figure 6: Dimensions for 12W model

Dimensions of the 18W Dfiolk LED Wall Light: 46cm length, 8cm height, 5cm depth

Figure 7: Dimensions for 18W model

7.2 Color Temperature Options

Comparison of warm white (3000K), pure white (4000K), and cool white (6000K) light temperatures

Figure 8: Visual representation of different color temperatures

8. User Tips

  • Optimal Placement: For vanity mirrors, install the light above or beside the mirror for even illumination. For bedside use, position it to provide adequate reading light without disturbing others.
  • Angle Adjustment: Experiment with the 270-degree rotation feature to create different lighting moods or to highlight specific areas of your room.
  • Color Temperature Choice: Consider warm white (3000K) for cozy areas like bedrooms, pure white (4000K) for general living spaces, and cool white (6000K) for task-oriented areas like studies or kitchens.

9. Warranty & Support

This Dfiolk LED Wall Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

Manufacturer Information

  • Company Name: Shenzhen Oushida Lighting Co., Ltd
  • Address: No. 8 Union Road, Wodu Village, Baoan Community, Yuanshan Street, Longgang District, Shenzhen City, Guangdong Province, China Postcode: 440307
  • Email: 303626099@qq.com

EU Authorized Representative

  • Name: Sophie Dupont
  • Address: 8 bis rue Abel 75012 Paris, France Paris Ile-de-France
  • Email: SophieDupont@proconseilfr.com

10. Compliance Information

This product complies with the following directives:

  • Low Voltage Directive 2014/35/EU
  • Electromagnetic Compatibility Directive 2014/30/EU
  • Restriction of the Use of Certain Hazardous Substances (RoHS) Directive 2011/65/EU

CE

11. Disposal & Recycling

Do not dispose of this product with general household waste. Please follow local environmental and waste disposal regulations for electrical and electronic products. Proper disposal helps prevent potential negative consequences for the environment and human health.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.