Introduction
Thank you for purchasing the TG437 Portable Wireless Bluetooth Speaker. This speaker is equipped with Bluetooth 5.3 for optimal connection and pairing with your Bluetooth-enabled device. Please read this user manual carefully before use and keep it handy for future reference. For any additional questions or comments, please contact support at support@ortizan.com.cn.
The TG437 speaker supports True Wireless Stereo (TWS) functionality, allowing two TG437 speakers to be paired together for an immersive 3D surrounding sound effect.
Package Contents
- 1x TG437 Bluetooth Speaker
- 1x 3.5mm Audio Cable
- 1x Type-C Charging Cable
- 1x User Manual
- 1x Silicone Handle
Features
- DSP Algorithm Patent Technology: Delivers a maximum power output of 2x20W (Total 40W).
- IPX7 Water Resistance: Provides protection against water immersion.
- Dual Passive Radiators: Ensures superior deep bass sound.
- True Wireless Stereo (TWS): Allows two speakers to connect for stereo surround sound.
- Long-lasting Battery: Inbuilt rechargeable lithium battery offers up to 30 hours of playtime on a single charge.
- EQ Sound Effects Adjustment: Customize your audio experience.
- Bluetooth 5.3: For stable and efficient wireless connectivity.
- Multiple Playback Options: Supports Plug and Play music easily from a TF card, FM radio, and USB playback.
- Voice Assistant Support: Compatible with Siri, Google, and other local Android voice assistants (on Samsung, Huawei, Xiaomi, etc.) for music streaming, phone calls, and weather inquiries.
- RGB LED Lights: Flash in sync with music, adding a visual element to your listening experience.
Button Configuration
The speaker features a clearly laid out control panel. Refer to the diagram below for button identification:
Figure 1: TG437 Speaker Button Layout and Ports.
- Power On/Off, Mode Switch, Pairing indicator
- EQ music effects, Light on/off, Voice assistant
- Charging indicator light
- Next track, Volume Up
- Previous track, Volume down
- Play/Pause button, TWS, Bluetooth disconnected, True Wireless Stereo light
- Charging interface (Type-C)
- TF/Micro SD card slot
- Aux-in port; Reset
Button Operations
| Key | Operation | Function |
|---|---|---|
| Power Button | Short press | Change the play mode |
| Long press (3 seconds) | Turn on/off the speaker | |
| Next Track / Volume Up | Short press | Volume up |
| Long press | Choose next track | |
| Previous Track / Volume Down | Short press | Volume down |
| Long press | Choose previous track | |
| EQ Button | Short press | Change the EQ |
| Double click | Turn on/off the RGB light | |
| Long press (3 seconds) | Activate voice assistant | |
| Play/Pause Button | Short press | Play/pause music; Answer/hang up a call |
| Long press (3 seconds) | Disconnect Bluetooth | |
| Double click | Activate TWS pairing |
Note: Some models may have a physical reset key hidden in the Aux-in port. Use a hard stick to press it for resetting the device.
Setup and Operating Instructions
1. Bluetooth Mode
- Turn on the TG437 speaker. It will automatically enter Bluetooth pairing mode (the blue light will flash, indicating it's waiting for pairing).
- On your mobile device, enable Bluetooth and search for available devices.
- Select "X8Pro" from the list of available devices to pair.
2. True Wireless Stereo (TWS) Mode
TWS allows two TG437 Bluetooth speakers to be paired together to play music simultaneously, providing a 3D stereo surround sound experience.
- Ensure both TG437 speakers are turned on and disconnected from any other Bluetooth devices.
- Hold one of the speakers and double-press the Play/Pause button. You will hear a prompt tone, and the speaker will enter TWS pairing mode.
- Once successfully connected, you will hear "Left Channel" and "Right Channel" from the respective speakers.
- The blue light on the main engine (left channel speaker) will flash, while the indicator on the auxiliary equipment (right channel speaker) will remain steadily on.
- Now, pair the main engine (left channel speaker) to your mobile device via Bluetooth as described in "1. Bluetooth Mode".
- In TWS mode, only the main engine (left channel speaker) supports hands-free calling. The right channel speaker will be silent during calls.
- To disconnect TWS, double-press the Play/Pause button on either speaker.
3. TF Card Mode
- Insert a TF/Micro SD card (not included) into the TF card slot (Button 8).
- The speaker will automatically detect the card, enter TF Card mode, and begin playing audio files.
- Supported formats include WAV, FLAC, APE, and MP3. The maximum supported capacity is 32GB.
4. AUX-in Mode
- Connect your non-Bluetooth audio device to the speaker's Aux-in port (Button 9) using the provided 3.5mm audio cable.
- The speaker will automatically switch to Aux-in Mode.
- Note: The USB power supply from most computers may not meet the charging standards for the speaker. Avoid charging the speaker via a computer's USB port when the speaker is operating in AUX-IN mode.
5. Charging
Connect the provided Type-C charging cable to the charging interface (Button 7) on the speaker and to a suitable 5V/2A power source.
- Red light: Indicates the speaker is currently charging.
- Light off: Indicates charging is complete.
A full charge typically takes 3-4 hours.
Maintenance
- Do not use detergents or cleaning materials containing chemicals, as they may damage the product.
- Do not disassemble the product. It contains no user-serviceable parts.
- Avoid dropping or subjecting the speaker to heavy impact to ensure optimal performance.
- Store the product in a dry location. Accumulation of dust, dirt, and moisture can lead to loss of sound quality.
- Do not dispose of the product in fire, as the battery may explode or leak.
Troubleshooting
If you encounter issues with your TG437 speaker, try the following steps:
- No Power: Ensure the speaker is fully charged. If the battery is low, the speaker will automatically power off.
- Cannot Pair Bluetooth: Make sure the speaker is in Bluetooth pairing mode (blue light flashing). Check that your device's Bluetooth is enabled and within the 10m/33ft wireless range. Try restarting both the speaker and your device.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the correct play mode (Bluetooth, TF Card, AUX-in) is selected.
- TWS Pairing Issues: Ensure both speakers are disconnected from other Bluetooth devices before attempting TWS pairing. Follow the TWS pairing steps carefully.
- Speaker Not Responding: If the speaker becomes unresponsive, locate the physical reset key (if present) in the Aux-in port and use a hard stick to reset the device.
- Auto Power Off: The speaker will automatically power off after 20 minutes if it's not paired with any device or if no sound is playing after pairing. This is a power-saving feature.
Specifications
| Attribute | Value |
|---|---|
| Model | TG437 (also referred to as X8Pro in some documentation) |
| Material | ABS + Fabric |
| Bluetooth Version | 5.3 |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Bluetooth Transmission Range | Up to 20m / 66ft (open area) |
| Waterproof Rating | IPX7 |
| Output Power | 2x20W Max (Total 40W) |
| Input | DC 5V/2A |
| Frequency Range | 20Hz-20000Hz |
| Battery | Built-in lithium battery, 3300mAh x 2 (Total 6600mAh) |
| Playtime | Up to 30 hours (at around 65 dB volume) |
| Standby Time | About 24 months |
| Charging Time | 3-4 hours |
| Functions | Hands-free phone call, Aux-in, TF/Micro SD card, FM Radio, USB Playback, TWS, EQ, RGB Lighting |
| Dimensions (L x W x H) | 252 x 115 x 127mm |
| Weight | Approximately 1265g |
For a comprehensive list of specifications, please refer to the official user manual PDF: TG437 User Manual (PDF).
User Tips
While specific user tips from reviews or Q&A were not provided, here are some general tips for optimizing your experience with the TG437 speaker:
- Optimal Sound: For the best audio quality, ensure the speaker is placed on a stable surface and not obstructed. Experiment with the EQ settings to find your preferred sound profile.
- Maximizing Battery Life: To extend playtime, consider lowering the volume and turning off the RGB lights when not needed.
- TWS Placement: When using TWS mode, place the two speakers equidistant from your listening position for the most balanced stereo effect.
- Voice Assistant: Long-press the EQ button for 3 seconds to quickly activate your device's voice assistant for hands-free control.
Warranty and Regulatory Information
Warranty Information
Your TG437 Bluetooth Speaker is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. The manufacturer is not responsible for accidental use of this product, and liability will not exceed the purchase price of the product.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and its supplied accessories are marked with "CE" and comply with the applicable harmonized European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU, and the WEEE Directive 2012/19/EU. Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, please refer to: www.recyclethis.info.
Product Overview Video
Video: An overview of the TG437 speaker, showcasing its RGB lighting, various playback modes (FM, TF, USB), TWS functionality, and EQ sound effects.