FLYLINKTECH Car Battery Jump Starter BD10

Introduction

Thank you for choosing the FLYLINKTECH BD10 Car Battery Jump Starter. This powerful and versatile device is designed to provide reliable jump-starting for a wide range of vehicles and serve as a portable power bank for your electronic devices. With an 8000A peak current and 26800mAh capacity, it ensures you're never stranded with a dead battery. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your jump starter.

Product Overview

The FLYLINKTECH BD10 is equipped with advanced features for optimal performance and safety:

• Powerful Jump Starting: 8000A peak current and 26800mAh capacity, capable of starting all gas engines and diesel engines up to 12.0L. Features a 'BOOST' button for completely depleted batteries.
• Multifunctional Power Bank: Includes PD65W USB-C (input/output), dual USB-A Quick Charging 3.0 outputs (5V/3A, 9V/2A, 12V/1.5A), and a DC output (15V/10A) for charging phones, tablets, air compressors, and other devices.
• Smart Secure Protection: Upgraded smart jumper clamps offer 10 safety protections, ensuring safe operation even in extreme temperatures (-4°F to 140°F). IP65 waterproof rating allows for safe use in rainy conditions.
• Intelligent LED Display: A visibly clear 6-inch LED screen shows real-time operation status, battery level, and potential error warnings with corresponding numbers for easy troubleshooting.
• Ultra-Bright LED Light: Built-in 600 lumens LED light with three modes: Flashlight, Strobe, and SOS. Long press the button to switch between modes, ideal for emergencies and outdoor activities.

Specifications

Setup

1. Initial Charge

Before first use, fully charge the jump starter. Connect the included USB-C cable to the jump starter's USB-C port and to a compatible USB wall charger (65W wall charger not included). The 6-inch LED display will show the charging progress. A full charge from 0% can take as little as 1.5 hours with a 65W charger.

2. Check Battery Level

Always check the jump starter's battery level on the 6-inch LED display before use. Ensure it has sufficient charge to start your vehicle or power your devices.

Operating Instructions

1. Jump Starting a Vehicle

1. Ensure the jump starter is adequately charged (at least 50% recommended).
2. Turn off your vehicle's ignition and all accessories.
3. Connect the red (+) clamp of the smart jumper cables to the positive (+) terminal of your vehicle's battery.
4. Connect the black (-) clamp of the smart jumper cables to the negative (-) terminal of your vehicle's battery.
5. Plug the smart jumper cable connector into the jump starter's port. The LED display will show 'READY' or similar indication.
6. If the vehicle battery is completely depleted, press the 'BOOST' button on the jump starter.
7. Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
8. Once the vehicle starts, immediately disconnect the smart jumper cable from the jump starter, then remove the black (-) clamp, followed by the red (+) clamp from the vehicle battery.

2. Using as a Portable Power Bank

The BD10 can charge multiple electronic devices:

• USB-C Output: Use the PD65W USB-C port to fast charge compatible devices like laptops, tablets, and smartphones.
• USB-A Outputs: Use the dual Quick Charging 3.0 USB-A ports (18W max each) to charge smartphones, tablets, and other USB-powered devices.
• DC Output: The 15V/10A DC output can power 12V accessories like air compressors or car vacuums using the included DC cigarette lighter adapter.

3. Emergency LED Light

The built-in 600 lumens LED light has three modes:

• Flashlight: For general illumination.
• Strobe: For signaling or attracting attention.
• SOS: For emergency signaling.

To activate the light, press the light button. Long press the button to cycle through the different modes.

Safety Precautions

• Read all instructions carefully before use.
• Do not immerse the unit in water. The IP65 rating protects against splashes, but not submersion.
• Do not jump start a frozen battery.
• Do not connect the positive and negative clamps together.
• Do not attempt to jump start vehicles that exceed the specified engine displacement limits.
• Keep out of reach of children.
• Store in a cool, dry place away from direct sunlight and high temperatures.
• If the jump starter becomes excessively hot during use, disconnect it immediately and allow it to cool down.
• The smart jumper clamps provide 10 safety protections, including reverse polarity, over-current, short-circuit, over-charge, and over-temperature protection. Pay attention to warning icons on the LED display.

Maintenance and Storage

• Recharge the jump starter every 3-6 months, even if not used, to maintain battery health.
• Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store the jump starter and accessories in the provided portable EVA carrying case to protect them from damage.
• Avoid storing the unit in extreme temperatures (above 140°F or below -4°F) for extended periods.

Troubleshooting

• Vehicle not starting:
  • Check if the jump starter has sufficient charge.
  • Ensure clamps are securely connected to the correct battery terminals (red to positive, black to negative).
  • If the battery is completely dead, use the 'BOOST' function.
  • Check for error messages on the LED display and refer to the corresponding warnings.
• Jump starter not charging:
  • Ensure the USB-C cable and wall charger are working correctly.
  • Verify the USB-C cable is fully inserted into the jump starter's port.
• LED light not working:
  • Ensure the jump starter has power.
  • Press the light button firmly. Long press to cycle modes.

The intelligent LED screen will display warning icons and numbers in case of misuse, helping you to identify and correct issues promptly.

User Tips

• For optimal performance, try to keep the jump starter charged above 50% when not in use, especially if you anticipate needing it for an emergency.
• Always store the jump starter in an easily accessible location in your vehicle, such as the glove compartment or trunk, so it's ready when you need it.
• When using the power bank feature, ensure your devices are compatible with the output voltages and currents to prevent damage.

Warranty and Support

Your FLYLINKTECH BD10 jump starter comes with a 2-YEAR FREE Warranty. For any questions, technical assistance, or warranty claims, please contact our customer service. We offer 7/24 Customer Service and Lifetime Technical Support to ensure your satisfaction.