1. Product Overview
The TECTINTER X9 is a versatile RGB Bluetooth-compatible wireless game controller designed for a wide range of gaming platforms. It features ergonomic design, adjustable vibration, 6-axis gyro motion control, programmable buttons, and customizable RGB lighting.
Video: TECTINTER X9 Controller demonstration, showcasing RGB lighting, multi-platform connectivity, and rumble features.
2. Setup
2.1 What's in the Box
- 1x TECTINTER X9 Wireless Controller
- 1x USB Type-C Charging Cable
- 1x Instruction Manual
- 1x Phone Clip (optional, depending on package)

Image: Contents of the TECTINTER X9 controller package, including the controller, USB cable, optional phone clip, and manual.
2.2 Charging the Controller
Before first use, fully charge the controller. Connect the supplied USB Type-C cable to the controller's charging port and the other end to a USB power source (e.g., PC, USB wall adapter).
- Charging Indicator: When charging while off, the corresponding mode indicator light will flash slowly and become solid when fully charged. When charging in Bluetooth connection state, the mode indicator will flash slowly and become solid when fully charged.
- Charging Time: Approximately 2-3 hours for a full charge.
- Play Time: Up to 10 hours of play time on a full charge (lights off).

Image: Comparison highlighting the Ternary Lithium Battery in the TECTINTER X9 for longer life, larger capacity, and more charge/discharge cycles compared to Lithium Polymer batteries.
2.3 First-Time Pairing
The TECTINTER X9 controller supports multiple connection methods (Bluetooth, 2.4G, Wired) for various platforms. Refer to the detailed operation mode table below for specific pairing instructions.

Image: Detailed table outlining pairing methods for Bluetooth (Android V3, Android Standard, iOS MFi, iOS V3, PS3, PS4, Switch, PC Bluetooth), 2.4G Wireless, and Wired USB modes across different operating systems and consoles.
General Pairing Steps:
- Nintendo Switch: On the Switch host, go to Controllers > Change Grip/Order. Press and hold R2 + HOME button for 2 seconds. The controller's LED will flash green rapidly; it will become solid green upon successful pairing.
- PS3/PS4: Connect the controller directly to the PS3/PS4 host with a USB cable. Press the HOME button to pair. The LED will flash red slowly; it will become solid red upon successful pairing.
- Android (ShootingPlus V3 Mode): Press and hold A + HOME button for 2 seconds. The LED will flash purple rapidly. Select