AULA AG60 Mechanical Gaming Keyboard User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your AULA AG60 60% Layout Wired CNC Aluminum Mechanical Gaming Keyboard. Please read this manual thoroughly to ensure proper use and to fully utilize all features of your new keyboard.

Figure 1: AULA AG60 Mechanical Gaming Keyboard Overview

Setup

1. Connecting the Keyboard

1. Locate the USB Type-C port on the keyboard and the USB-A port on your computer.
2. Connect the provided USB Type-C cable to the keyboard.
3. Connect the USB-A end of the cable to an available USB port on your computer.
4. The keyboard is plug-and-play. Your operating system should automatically detect and install the necessary drivers.

2. Software Driver Installation (Optional for Advanced Features)

For advanced customization, including macro programming, RGB lighting effects, and magnetic switch configuration, it is recommended to install the official AULA software driver.

• To access the AULA Official Website: Press Fn + N on your keyboard.
• To access the AULA Driver download page: Press Fn + M on your keyboard.
• Ensure your keyboard input method is set to English for optimal functionality when using these shortcuts.

Operating Instructions

1. Keyboard Function Description

• Design: Features a stylish exterior with 10 LEDs in the spacebar (standard version has 5). The top-left metal badge is user-replaceable.
• Keystroke Feel: Switchable between soft or firm to suit gaming or office use.
• Customization: Keycaps and magnetic switches are hot-swappable, allowing for personalization with third-party components and mixed switch configurations.
• Magnetic Switch Precision: Adjust trigger travel from 0.001mm to 3.3/3.4mm. Rapid Trigger (RT) precision tuning down to 0.001mm.
• Performance:
  • Polling Rate: 8000Hz for all versions.
  • Full-key Scan Rate: 32,000Hz (Standard/Pro), 256,000Hz (MAX).
  • Single-key Scan Rate: 256,000Hz (Standard/Pro), 2,304,000Hz (MAX).
• Connectivity: Reliable Type-C connection for stable performance.

2. Backlight Effect Adjustment

The keyboard supports 20 RGB lighting effects, customizable via the software driver with over 16.8 million colors.

• Cycle Effects: Press Fn + I to cycle through 20 RGB lighting effects.
• Brightness Adjustment:
  • Increase Brightness: Press Fn + ↑ (Up Arrow)
  • Decrease Brightness: Press Fn + ↓ (Down Arrow)
• Speed Adjustment:
  • Increase Speed: Press Fn + ← (Left Arrow)
  • Decrease Speed: Press Fn + → (Right Arrow)
• Light Position / On/Off: Press Fn + Y (Pro/MAX: cycles upper/lower/dual light positions/off; Standard: toggles lights on/off).

Some of the available lighting effects include: Static Constant Light, Wave Ripple Mode, Tide Rise and Fall, Rippling Glow, Revolving Storm, Lucky Rainbow, Shining Rainbow, Sparkling Brilliance, Mobile Pane Light, Phantom Light Shifts, Cloud and Stream, Sine Waveform Light, Flowers Contending in Beauty, Colorful Inlay, Heavy Rainfall, Endless Pulse, Footprints in the Snow, Seeking Plum in Snow, Laser Cloud-Piercing, and Wavy Glow.

3. Music Adjustment

• Previous Song: Fn + Q
• Mute: Fn + L
• Next Song: Fn + E
• Volume Up: Fn + K
• Volume Down: Fn + J

4. System Mode Switching

• Windows Mode: Hold Fn + G for 5 seconds (Windows key flashes blue for 1 second).
• Lock/Unlock Windows Key: Press Fn + Left WIN (Windows key remains red when locked).
• macOS Mode: Hold Fn + H for 5 seconds (Windows key flashes white for 1 second). In macOS mode, WIN and Left Alt keys swap positions, and the WIN key is not locked.

5. Other Shortcut Key Descriptions

6. Configuration Profiles

The keyboard supports 4 onboard profiles, switchable via the driver or directly using Fn key combinations:

• Profile 1: Fn + Z (Z button flashes red 3 times)
• Profile 2: Fn + X (X button flashes green 3 times)
• Profile 3: Fn + C (C button flashes blue 3 times)
• Profile 4: Fn + V (V button flashes orange 3 times)

7. Magnetic Switch Configuration (via Software Driver)

The software driver unlocks advanced magnetic switch functionalities:

• Dynamic Keystroke (DKS): Trigger 1-4 functions based on press/release depth.
• Multi-Point Trigger (MPT): Activate up to 3 functions at different actuation depths.
• Hold/Tap (MT): One action when held, another when tapped.
• Toggle Mode (TGL): Tap for continuous activation, hold for normal behavior.
• Release Trigger (END): Send a secondary action when key is released.
• SOCD Function: Latter key press overrides and releases previous one (for fighting games).
• Rapid Trigger (RT): Dynamically adjusts actuation/reset points for ultra-fast response.
• Calibration: Visualized quick calibration and real-time monitoring of switch travel.
• 0-Dead Zone: Driver allows 0-dead zone settings for maximum precision.

Maintenance

1. Cleaning the Keyboard

• Disconnect the keyboard from your computer before cleaning.
• Use a soft, lint-free cloth lightly dampened with water or a mild cleaning solution (e.g., isopropyl alcohol) to wipe the keycaps and keyboard surface.
• Avoid spraying liquids directly onto the keyboard.
• Use compressed air to remove dust and debris from between the keycaps.

2. Keycap and Switch Maintenance

The AULA AG60 features hot-swappable keycaps and magnetic switches. This allows for easy removal and replacement if needed. Use a keycap puller and switch puller (not included) for safe removal. Regular cleaning under the keycaps can prevent debris buildup.

Troubleshooting

• Keyboard Not Responding:
  • Ensure the USB Type-C cable is securely connected to both the keyboard and the computer.
  • Try connecting the keyboard to a different USB port on your computer.
  • Test the keyboard on another computer to rule out system-specific issues.
  • Restart your computer.
• Backlight Not Working or Incorrect:
  • Check backlight brightness settings (Fn + ↑/↓).
  • Ensure the backlight is not turned off (Fn + Y).
  • If using the software driver, verify lighting profiles and settings.
• Specific Keys Not Working:
  • If a key is not registering, gently remove the keycap and check for any obstructions or debris around the switch.
  • Since switches are hot-swappable, you may try reseating the switch or replacing it with a known working switch from another key (if available).
• Unexpected Behavior / Settings Issues:
  • Perform a factory reset by pressing Fn + R. This will restore the keyboard to its default settings.
  • If using the software driver, ensure it is up-to-date.
• Driver Not Recognizing Keyboard:
  • Reinstall the software driver.
  • Ensure your operating system is compatible (Windows XP/7/8/10).

Specifications

User Tips

• Optimize for Gaming: Explore the magnetic switch configuration options in the software driver, especially Rapid Trigger (RT) and Dynamic Keystroke (DKS), to fine-tune your gaming experience for ultra-fast response and custom key actions.
• Personalize Your Setup: Take advantage of the hot-swappable keycaps and switches to customize the look and feel of your keyboard. Experiment with different switch types to find your preferred typing or gaming experience.
• Keep it Clean: Regular cleaning with compressed air and a soft cloth will help maintain the keyboard's performance and appearance, especially given its open design.

Warranty and Support

Your AULA AG60 Mechanical Gaming Keyboard comes with a manufacturer's warranty. For detailed warranty terms, technical support, driver updates, and frequently asked questions, please visit the official AULA website.

• Official AULA Website: Use Fn + N shortcut or refer to the website address provided in the driver section.