Introduction
Thank you for purchasing the Nekteck Shiatsu Foot Massager Machine with Soothing Heat. Nekteck is committed to providing high-quality products and excellent services. This manual provides detailed instructions for the functions and features of your Shiatsu foot massager. Please read it carefully before use.
The Nekteck Shiatsu Foot Massager Machine combines kneading massage, air pressure, and heat therapy to relieve foot soreness and pain. It features 3 massage modes and 2 intensity levels, designed to deeply massage your soles, heels, and toes for a comfortable massage experience.
Safety Instructions
Please read all instructions carefully before using the Foot Massager for the first time. Keep this manual for future reference. Improper use or unauthorized repairs are not permitted and will void the warranty. Always follow basic safety precautions to prevent fire, electric shock, and other serious injuries.
- This product is not intended to diagnose or treat any medical condition or to replace treatment from healthcare professionals. Always consult your physician before using any massagers. Stop using and consult your healthcare provider immediately if you feel uncomfortable during use.
- If you are pregnant, have heart disease, hypertensive disease, osteoporosis, or other illnesses, consult your doctor before using this product.
- If you are dependent on electrical aids (e.g., pacemakers), consult your doctor for medical advice before taking a massage.
- DO NOT use this product directly on injured, swollen, or inflamed areas or skin eruptions.
- The device is fitted with a heating function and has hot surfaces. Individuals sensitive to heat must exercise caution.
- This product should NOT be used by people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless supervised or given instructions concerning safe use and understanding of hazards.
- This product is NOT A TOY. Ensure adequate supervision when used by or near children.
- DO NOT leave the product unattended when plugged in.
- The product is intended for Household Use ONLY. Use this unit according to its intended purpose as stated in the instructions.
- DO NOT use the product outdoors.
- DO NOT use or store the product near sinks, baths, or showers containing water or near running water.
- DO NOT operate the product if any water or other liquids get into the massager.
- DO NOT place any part of this appliance on or near a hot area (e.g., hot gas, electric burner, or heated oven). Otherwise, the plastic may melt and cause a fire.
- DO NOT sit or stand on the massager. This product is not designed to support your full body weight.
- DO NOT put any foreign objects into any of the openings on the massager.
- DO NOT use pointed or sharp objects to handle the product to avoid damage.
- Stop using it immediately if you feel any abnormal or severe pain, uncomfortable high temperature, or if there is a burning smell coming from this massager during use.
Electric Safety:
- Before connecting the device to the power supply, ensure that the supply voltage stated on the rating plate is compatible with your main supply.
- DO NOT use blankets or pillows on the massager during operation, as this may lead to excessive heating and cause fire, electric shock, or injury.
- The appliance can only be used with the power adapter that comes with the appliance.
- Unplug IMMEDIATELY and DO NOT use the product if it is malfunctioning or damaged in any way. Inspect the product by a qualified person.
- Unplug this product from the electrical outlet after use and before cleaning.
- DO NOT use this appliance if it has been dropped or any part of the appliance (including the plugs, cord, sockets, or power adapter) has been damaged.
- DO NOT operate the appliance with wet hands or wet feet to reduce the risk of electric shock.
Package Contents
The package includes the following items:
- Nekteck Shiatsu Foot Massager Machine with Soothing Heat (x1)
- User Manual (x1)
- Power Adapter (x1)
- Warranty Card (x1)
Product Features
- Soothing Heat Function
- 3 Massage Modes (M1: Rolling & Kneading & Air Pressure; M2: Rolling & Kneading; M3: Air Pressure Only)
- 2 Intensity Levels (Low/High)
- 15-Minute Auto Off Timer
- Detachable and Washable Foot Covers
- Lightweight and easy to carry
Specifications
| Attribute | Value |
|---|---|
| Product Name | Nekteck Shiatsu Foot Massager Machine with Soothing Heat |
| Model Number | NK-FM06 |
| Rated Voltage | DC 12V = 2.5A |
| Rated Power | 30W |
| Dimensions | 14.4 x 13.2 x 7.1 in / 36.5 x 33.5 x 18.0 cm |
| Net Weight | Approx. 7 lbs / 3.2 kg |
| Application | Foot |
| Item Type | Massage & Relaxation |
| Certification | FCC, UL |
Know Your Shiatsu Foot Massager (Components)
Familiarize yourself with the different parts of your foot massager:
Control Panel:
- ON/OFF Button: For turning the massager on or off.
- Heat Button: For turning the heating function on or off.
- Air Pressure Intensity Button: For switching between low and high air pressure intensity levels.
- Massage Mode Button (M1/M2/M3): For switching between the three massage modes.
Operating Instructions
Setting Up:
- Remove all packing material from the massager. Ensure no packaging remains underneath or around the massager. Check for any damaged or missing parts.
- Unwind the power cord and plug it into the DC power jack on the massager.
- Place the massager on a flat floor in front of your chair.
- Connect the power adapter to a wall socket.
Your Shiatsu Foot Massager is now ready for use!
Massage Operation:
- Press the ON/OFF Button (
) to turn on the massager. The unit will start a 15-minute massage session by default.
Details of Default Settings:
| Heating Function | Operation Mode | Air Pressure Intensity |
|---|---|---|
| ON | M1 (Rolling & Kneading & Air Pressure Massage) | Low Intensity |
- Switch the massage mode by pressing the Massage Mode Button (
). The mode will cycle through M1 → M2 → M3 with each press. The corresponding indicator light (M1, M2, or M3) will light up in green.
Details of Massage Modes:
| Massage Mode | Feature |
|---|---|
| M1 | Rolling & Kneading & Air Pressure Massage |
| M2 | Rolling & Kneading Massage |
| M3 | Air Pressure Massage Only |
- Turn off or restart the heating function by pressing the Heat Button (
). The corresponding red indicator light will turn off/on. - Switch the intensity level between low and high by pressing the Air Pressure Intensity Button (
). The corresponding indicator light below "L" or "H" will light in green.
Notes:
- The heating function will turn on automatically after switching the massage mode.
- The massager will turn off automatically after a 15-minute massage session to prevent overheating.
- Switching the massage mode or turning on/off the heating function will not affect the timing of the massage session.
- In the M2 Mode, the air pressure function is deactivated and locked.
Cautions:
- Each individual should NOT use the massager or the heating function for over 15 minutes at a time, and NOT use the massager for over 30 minutes a day.
- Allow the massager to cool down for 5 minutes between uses. Excessive use could cause the appliance to overheat and reduce its lifespan.
- To end the massage, press the ON/OFF Button.
- DO NOT attempt to stand on this foot massager. Use ONLY when you are sitting.
- The massager is designed for deep kneading massage which may be uncomfortable for people not used to it. If so, it is recommended to wear thick socks to get moderate pressure and improve your massage experience.
Cleaning and Maintenance
To Clean the Massager:
- Unplug the massager and allow it to cool down before cleaning.
- Clean the surface only with a soft, slightly damp sponge or cloth.
- DO NOT allow water or any other liquids to get into the massager.
- DO NOT immerse the massager in any liquid to clean.
- DO NOT use abrasive cleaners, brushes, or strong chemicals, as they might damage the product.
To Clean the Foot Cover:
- The foot cover can be removed for cleaning.
- Hand wash with water temperature below 30°C.
- Do not bleach.
- Do not tumble dry.
- Do not iron.
- Do not dry clean.
To Store:
- Place the massager in its package box or store it in a safe, dry, and cool place.
- Avoid sharp edges and pointed objects to protect the product from scratching or damaging.
- DO NOT wrap the power cord around the product to avoid breakage.
- Keep the massager away from high temperatures.
Troubleshooting
If your Shiatsu Foot Massager is not operating correctly, refer to the chart below. If the issue persists, contact a qualified technician. Do not attempt to repair it yourself to avoid electric shock.
| Problem | Possible Cause | Solution |
|---|---|---|
| The product does not work. | The ON/OFF button is not pressed. | Press the ON/OFF button. |
| The adapter is not plugged in properly. | Plug the adapter properly. | |
| The DC connector is not connected properly to the DC power jack. | Check and reconnect the connector and jack port. | |
| The product suddenly stops working. | The product would turn off automatically after a 15-minute session. This is normal. | If you want to start another session, press the ON/OFF button again. |
| The product is overused and the overheat protection turns on. | Unplug the product and let it cool down completely before using it again. | |
| The product stops heating. | The heat button has not been pressed. | Press the Heat button and the indicator light should light in red. |
| The massage intensity is too high or too low. | Your foot is positioned at the wrong angle. | Adjust the contact angle to get the moderate intensity. |
| The product is abnormally warm. | The product is likely to be overused. | Unplug the product and let it cool down completely before using it again. |
User Tips
Based on common user experiences, here are some tips to enhance your massage:
- Start Gently: If you are new to foot massagers or have sensitive feet, begin with the lowest intensity setting and gradually increase as you get accustomed to the massage.
- Wear Socks: For a more comfortable experience, especially with deep kneading, consider wearing thick socks. This can help moderate the pressure and make the massage more enjoyable.
- Optimal Positioning: Ensure your feet are properly seated in the foot slots to maximize contact with the massage rollers and air compression chambers. Adjust your foot angle if the intensity feels too high or low.
- Hydrate: Drink water before and after your massage session to help with muscle relaxation and recovery.
Warranty and Support
Limited Warranty:
Nekteck provides all customers with a warranty of 12 Months from the date of purchase. Please contact our customer service team if you have any questions or concerns.
For your reference, we recommend recording your order number and date of purchase:
Order ID: ____________________
Date of Purchase: ____________________
Disclaimer:
Nekteck and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some countries or states do not allow the exclusion or limitation of incidental or consequential losses, so this disclaimer may not apply to you.
IMPROPER USE OF NEKTECK'S PRODUCTS INVOLVES SERIOUS RISKS INCLUDING INJURY AND DISABILITY. YOU UNDERSTAND THAT BY KEEPING, USING, OR ALLOWING USE OF NEKTECK'S PRODUCTS, YOU AGREE TO THE FOLLOWING:
- NEKTECK ACCEPTS NO RESPONSIBILITY FOR ANY INJURY WHICH MIGHT OCCUR WHILE USING NEKTECK'S PRODUCTS.
- USE LIMITATION. YOU MAY NOT MODIFY AND REPRODUCE NEKTECK'S PRODUCTS. YOU SHALL CAREFULLY INSPECT NEKTECK'S PRODUCTS BEFORE EACH USE TO ENSURE IT HAS NOT BEEN DAMAGED AND IS FULLY FUNCTIONAL.
Customer Support:
Feel free to contact our friendly Customer Support Team if you have any questions or concerns regarding your new product. Your satisfaction is our priority.
Email: support@nekteck.com
We will reply to your message within 24 hours!
Please include your Order ID in your email when contacting Customer Support for faster solutions.
Explore more surprises at www.nekteck.com