Airepair HP-65M Type-C Mini Welding Table User Manual

1. Introduction

The Airepair HP-65M is a compact and efficient constant temperature heating table designed for precise heating of small electronic components, such as PCB SMD boards. Featuring PD 65W fast heating and an adjustable temperature range of 10°C to 240°C, it is an ideal tool for desoldering, preheating, and other delicate electronic repair tasks. This manual provides essential information for safe and effective operation of your device.

2. Safety Instructions

To ensure safe operation and prevent damage or injury, please read and adhere to the following safety guidelines:

• Always use a power supply that matches the rated voltage and specifications of the heating platform.
• This heating table supports PD protocol / PD3.0 / PD3.1 / QC protocol / 20V / 3.25A fast charging chargers. Do not use non-matching power cords or plugs.
• Regularly inspect the power plug and cord for any signs of damage or aging. Discontinue use immediately and replace if any issues are found to prevent short circuits or electric shock. Do not attempt to disassemble or repair the device yourself.
• Operate the device strictly according to these instructions. Familiarize yourself with the operation process, hazard warnings, and precautions.
• Before powering on, carefully check that all heating table components and protective devices are complete and in good condition. Ensure the work area is clear of obstructions.
• After turning on the heating table, do not immediately touch the heating area to avoid burns.
• Set temperature parameters appropriately based on the material, size, and process requirements of the object being heated. Avoid excessively high temperatures that could cause fire or damage to the item.
• Do not frequently adjust the temperature during the heating process, as this can affect the stability and accuracy of temperature control.
• When placing objects on the heating table, do so carefully and ensure they are placed flat and stable.
• Strictly prohibit placing flammable or explosive items such as paper, alcohol, or gasoline on the heating table to prevent fire hazards.
• Keep the device away from children to prevent accidental injury due to curiosity.

3. Product Specifications

4. Package Contents

Upon unpacking, please ensure all the following items are present:

• Airepair HP-65M Mini Welding Table (Heating Platform)
• User Manual (this document, also available as PDF)
• Type-C Power Cable (not explicitly listed but implied by 'Charging port: PD Type-C')

5. Setup and Component Identification

5.1 Unpacking

Carefully remove the heating table from its packaging. You may need to peel off any protective films from the heating plate before first use.

5.2 Component Identification

Familiarize yourself with the main components of the device:

• Heating Platform: The top metal plate where components are placed for heating.
• Display Screen: Shows current temperature, set temperature, input voltage, heating status, and power progress bar.
• Buttons: Used for adjusting temperature and navigating settings.
• Indicator Lights: Provide visual feedback on heating status (blue for ON, red flashing for over 200°C).
• Type-C Charging Port: For connecting the power supply.

5.3 Power Connection

Connect the Type-C power cable to the device's charging port and then to a compatible PD 20V/3.25A power adapter. The device will automatically power on when plugged in.

6. Operating Instructions

6.1 Power On/Off

• The device powers on automatically when connected to a power source.
• To turn off heating, simultaneously click the '+' and '-' buttons.

6.2 Main Interface Display

The main display screen provides real-time information:

• Current Temperature: The actual temperature of the heating plate.
• Set Temperature: The target temperature you have configured.
• Input Voltage: The current voltage supplied to the device.
• Heating Consecration: Indicates if heating is active.
• Power Progress Bar: Visual representation of heating power.

The device also features a 'wave' display mode which shows a real-time temperature-time curve, with a red dotted line representing the set temperature.

6.3 Setting Temperature

• Decrease Temperature: Click or long-press the '–' button.
• Increase Temperature: Click or long-press the '+' button.

6.4 Heating Operation

1. Set Desired Temperature: Use the '+' and '-' buttons to set your target temperature.
2. Activate Heating: Simultaneously click the '+' and '-' buttons to turn on the heating switch. The display will show "ON" and the blue indicator light will be constant.
3. Place PCB Board: Once the heating plate reaches the set temperature, carefully place the PCB board or component on it.
4. Desoldering/Preheating: Perform your desoldering or preheating task.
5. Exit Heating: Simultaneously click the '+' and '-' buttons again to turn off the heating switch. The display will show "OFF" and the blue indicator light will turn off. Allow the device to cool down completely before handling the heated component or the heating plate.

6.5 Settings Interface

To access advanced settings:

• Enter Settings: From the main interface, press and hold both '+' and '-' buttons simultaneously.
• Navigate Settings: In the settings interface, click '+' or '-' to switch between options like "mode", "cal" (calibration), "reset", and "exit".
• Select Option: Click both '+' and '-' simultaneously to enter the selected setting item.
• Exit Settings: Press and hold both '+' and '-' simultaneously to return to the main interface.

Mode Settings

• Click '+' or '-' to switch between different modes.
• Click both '+' and '-' simultaneously to confirm your mode selection. The device will remember your selection even after power-off.

Temperature Calibration

• Allows adjustment of temperature offset from -9 to +9.
• Click '+' to increase, '-' to decrease.
• Click both '+' and '-' simultaneously to confirm.
• Warning: Do not perform calibration without professional temperature measurement equipment.

Factory Reset

• Click both '+' and '-' simultaneously to confirm a factory reset. The device will restart and restore default settings.

6.6 Product Demonstration Video

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Airepair HP-65M Mini Welding Table:

• Cleaning: Ensure the device is powered off and completely cooled before cleaning. Use a soft, dry cloth to wipe down the exterior. For stubborn residue on the heating plate, use a non-abrasive cleaner specifically designed for electronics, applied sparingly to a cloth, not directly to the device.
• Storage: Store the device in a dry, dust-free environment when not in use. Avoid extreme temperatures and direct sunlight.
• Inspection: Periodically check the heating plate for any signs of wear, scratches, or damage. Ensure the power cable is free from kinks or cuts.
• Avoid Liquids: Do not expose the device to liquids. If liquid spills occur, immediately disconnect power and allow it to dry completely before attempting to use it again.

8. Troubleshooting

If you encounter issues with your Airepair HP-65M, refer to the following common troubleshooting steps:

• Device Not Powering On:
  • Ensure the Type-C power cable is securely connected to both the device and a compatible power adapter.
  • Verify that the power adapter is functioning correctly and providing the specified 20V/3.25A output.
  • Check the power outlet for functionality.
• Heating Plate Not Heating:
  • Confirm that the heating switch is turned "ON" (simultaneously click '+' and '-' buttons).
  • Check the set temperature on the display. Ensure it is above the ambient temperature.
  • If the red indicator light is flashing, the temperature might be exceeding 200°C, indicating it's actively heating or has reached a high temperature.
• Inaccurate Temperature Reading:
  • Avoid frequent temperature adjustments during heating.
  • If you suspect a significant discrepancy, and have professional temperature measurement equipment, you may use the calibration feature in the settings interface. Otherwise, contact support.
• Display Issues:
  • If the display is blank or showing erratic readings, try disconnecting and reconnecting the power.
  • If issues persist, a factory reset might resolve software-related glitches.

For persistent issues not covered here, please refer to the official user manual PDF or contact customer support.

9. User Tips

• Preheat Gradually: For sensitive components, consider preheating the board at a lower temperature before increasing it to the desired desoldering temperature.
• Use Tweezers: Always use appropriate tools like heat-resistant tweezers to handle components on the hot plate to avoid burns.
• Ventilation: Ensure adequate ventilation in your workspace, especially when desoldering, to dissipate fumes.
• Stable Surface: Always operate the heating table on a stable, heat-resistant surface.

10. Additional Resources and Support

For more detailed information, including comprehensive diagrams and advanced settings, please refer to the official user manual PDF:

User manual (PDF): View PDF Manual

For technical support or warranty inquiries, please contact the manufacturer or your point of purchase.