Creative Devil's Eye Truck Light

Contents

Creative 12-24V Devil's Eye Truck Light User Manual

1. Introduction

Thank you for choosing the Creative 12-24V Devil's Eye Truck Light. This universal multi-mode truck taillight is designed to enhance your vehicle's visibility and safety with its distinctive 'Devil's Eye' design and bright LED illumination. This manual provides essential information for the safe and effective use of your new truck light.

Creative Devil's Eye Truck Light installed on a truck, showing various color options.
Figure 1: Creative Devil's Eye Truck Light in various colors, installed on a truck.

2. Safety & Warnings

Please read all instructions carefully before use. Failure to follow these instructions may result in damage to the product or personal injury. Keep this manual for future reference.

  • ATTENTION: Not suitable for children under 3 years old.
  • ATTENTION: Keep the device and its cord out of reach of children under 3 years old.
  • ATTENTION: Keep away from children unless supervised by an adult.
  • ATTENTION: Do not use this product for purposes other than its intended use.
  • ATTENTION: Inspect the product before each use; do not use if damaged.
  • ATTENTION: Follow installation and operation guidelines to avoid injury.
  • ATTENTION: While the product features a robust waterproof housing, avoid prolonged submersion or high-pressure water jets.
  • ATTENTION: Handle with care to avoid cuts or injuries.
  • ATTENTION: Keep away from sharp objects, high temperatures, open flames, and prolonged direct sunlight.
  • ATTENTION: Stop using the product immediately if it becomes damaged.

3. Package Contents

Please check the package contents upon receipt:

  • 1x Creative Devil's Eye Truck Light

4. Specifications

  • Product Name: Eye Side Marker Lights
  • Material: Metal, LED
  • Dimensions: 11.21 cm (4.41 in) x 8.64 cm (3.40 in)
  • Voltage: 12-24V DC
  • Type: Functional
  • Origin: Mainland China
  • Features: Robust waterproof housing, exceptional brightness, multi-mode functionality, durable construction.
Diagram showing the dimensions of the Devil's Eye Truck Light: 11.21cm width and 8.64cm height.
Figure 2: Product Dimensions.
Red Devil's Eye Truck Light being splashed with water, demonstrating its waterproof feature.
Figure 3: Waterproof feature demonstration.

5. Setup & Installation

The Creative Devil's Eye Truck Light features user-friendly mounting options for quick and straightforward installation on various truck models. Please follow these steps:

  1. Preparation: Before first use, remove any protective films, tags, and packaging from the light and its accessories.
  2. Mounting: Securely attach the light to your desired location on the vehicle using appropriate hardware. Ensure it is firmly mounted to prevent movement during vehicle operation.
  3. Wiring: Refer to the circuit introduction diagram below for proper electrical connections.
Wiring diagram for the truck light. The back panel shows three wires: Red, Yellow, and Black. Red connects to ground, Yellow connects to turn signal, and Black connects to negative terminal. Note: Black connects to negative, red and yellow can connect to positive together.
Figure 4: Circuit Introduction and Wiring Diagram. The back panel features a galvanized zinc coating for heat dissipation and corrosion protection.
  • Red wire: Connects to ground.
  • Yellow wire: Connects to turn signal.
  • Black wire: Connects to negative terminal.
  • Note: The black wire connects to negative. The red and yellow wires can be connected to positive together for combined functionality.

Install and use with care. Avoid dropping, hitting, bending, or forcing parts during assembly to prevent damage.

6. Operating Instructions

Once properly installed and wired, the Creative Devil's Eye Truck Light will operate in conjunction with your vehicle's electrical system. These 12-24V LED lights deliver exceptional brightness, significantly enhancing visibility for your vehicle and improving safety on the road, especially in low-light conditions or adverse weather.

The light features multi-mode functionality, which will activate based on how it is wired to your vehicle's signals (e.g., running lights, turn signals). Ensure your wiring matches the desired operational mode.

Truck on the road at night with the Devil's Eye Truck Lights illuminated, enhancing visibility.
Figure 5: Truck with Devil's Eye Lights illuminated for enhanced visibility.

7. Maintenance

  • Cleaning: Use a soft, clean cloth to gently clean the surface of the light. Do not use paper towels, harsh chemicals, or rough cleaners, as these can scratch or damage the lens and housing.
  • Storage: When not in use, keep the light and its accessories in a dry, cool place. Protect from dust and moisture to prolong its lifespan.
  • Inspection: Periodically inspect the light for any signs of damage, loose connections, or wear. Address any issues promptly.

8. Troubleshooting

  • Light not turning on:
    • Check all wiring connections (positive, negative, ground) to ensure they are secure and correctly connected.
    • Verify that the vehicle's electrical system is providing the correct voltage (12-24V).
    • Check the vehicle's fuse box for any blown fuses related to the light circuit.
  • Light flickering:
    • Inspect for any loose wiring connections.
    • Ensure a stable power supply from the vehicle; voltage fluctuations can cause flickering.
  • One mode not working (e.g., turn signal):
    • Re-check the specific wiring for that function (e.g., the yellow wire for the turn signal) to ensure it is correctly connected and receiving power.

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. For best performance, ensure all connections are weatherproofed after installation.

10. Support & Warranty

For any support needs, warranty inquiries, or technical assistance, please contact your seller directly. You may also reach out to the manufacturer:

Manufacturer: Jinhua Jinwei Network Technology Co., Ltd.
Address: Building 2, No. 303 Qianfang Avenue, Xianhua Street, Pujiang County, Jinhua City, Zhejiang Province, 322299, China
Email: contact@162mail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.