1. Product Overview
The SENLO X3 140W LED Work Spotlights are high-performance lighting units designed for a wide range of vehicles including motorcycles, SUVs, ATVs, trucks, electric bicycles, and yachts. Featuring a triple-lens design, these spotlights offer ultra-bright illumination with various lighting modes and color temperatures to suit different driving conditions.
Key Features:
- High Power & Lumen: 140W per pair, up to 140,000LM per pair.
- Dual Color Temperature: White 6000K and Yellow 3000K, with various high/low beam combinations.
- Intelligent Control: Wireless switch for easy mode selection and operation.
- Durable Design: Aviation aluminum alloy body with efficient heat dissipation, IP68 waterproof and dustproof rating.
- Versatile Installation: Multi-angle adjustable brackets for flexible mounting options.
Package Contents:
The package includes all necessary components for installation and operation.

- Two (2) Lamp Heads (Spotlights)
- Two (2) Lamp Head Drives
- Two (2) Mounting Brackets
- Two (2) Sets of Screws and Accessories
- One (1) Flash Harness Wire
- One (1) Wireless Switch
Note: SENLO may randomly ship either of two packaging options, but the contents remain the same.

2. Setup and Installation
2.1 Mounting the Spotlights
The SENLO X3 spotlights come with adjustable brackets for flexible installation. Choose a mounting method that best suits your vehicle and ensures optimal light projection.

2.2 Suggested Installation Location
For optimal performance and signal transmission, it is recommended to install the spotlights near the car grille. This placement helps to:
- Keep the remote control cable group away from the battery and fuse box to avoid signal interference.
- Prevent the vehicle's hood from shielding the signal.
- Ensure smoother signal transmission for the wireless switch.
Installing the remote control cable group on the intake grille can result in a working temperature lower than 10°C compared to installing under car headlights. This is beneficial for remote control operation and safe use of the cable group.


2.3 Wiring Instructions
The SENLO X3 spotlights utilize an intelligent wiring harness for control. Follow the diagram carefully for proper connection.

- Connect the red wire to the positive terminal of the vehicle battery.
- Connect the black wire to the negative terminal of the vehicle battery.
- Connect the red ACC line to a positive electrode that is switched with the ignition (e.g., ACC power).
- Connect the signal line to the positive electrode of the speaker wire for horn-activated flashing (optional).
- Ensure all connections are secure and insulated.
Important Note:
The X3 is a high-power product (140W total). Directly using the original vehicle's power supply without an additional relay can lead to circuit overheating, insufficient voltage, and potential damage to the vehicle's wiring. It is highly recommended to use an additional relay for this lamp to ensure safe and stable operation.
2.4 Quick Disassembly
The spotlights feature a quick-release connector for easy installation and removal without cutting wires.

3. Operating Instructions
3.1 Wireless Switch Operation
The SENLO X3 spotlights are controlled by an intelligent wireless switch. Familiarize yourself with the button functions:

- Power Button (Bottom): Short press to turn the key switch light ON/OFF.
- L/H Key (Middle):
- Short press to switch between low beam and high beam.
- Press and hold for 2 seconds to enter simultaneous illumination mode (both high and low beams light up). Press briefly again to switch to far light.
- Press and hold for 2 seconds while both near and far lights are on, and the light will switch to far light; Press it briefly again, it's almost bright.
- Flash Button (Top):
- Press the first button: Both lights will flash simultaneously.
- Press the second button: The left and right lights will flash alternately.
- Press the third button: Restore the original state.
3.2 Lighting Modes and Color Combinations
The X3 spotlights offer versatile lighting options with different color temperatures for high and low beams.

- Option 1: High Beam Yellow (3000K), Low Beam White (6000K)
- Option 2: High Beam White (6000K), Low Beam Yellow (3000K)
- Option 3: High Beam White (6000K), Low Beam White (6000K)
The lights can also operate in a combined White + Yellow mode for enhanced visibility.

3.3 Product Demonstration Video
Watch this video for a visual demonstration of the product's features and lighting modes.
4. Maintenance
The SENLO X3 LED Work Spotlights are designed for durability and minimal maintenance, thanks to their robust construction and IP68 rating.
4.1 Cleaning
- Regularly clean the lenses and housing with a soft, damp cloth to remove dirt, dust, and debris.
- Avoid using abrasive cleaners or solvents that could damage the lens or finish.
4.2 Heat Dissipation
The spotlights feature an efficient heat dissipation design with an aviation aluminum shell, heat sink, and high-speed cooling fan. Ensure that the fan vents are not obstructed to maintain optimal cooling performance.

4.3 Waterproof and Dustproof
With an IP68 rating, the lights are highly resistant to water and dust. However, avoid prolonged submersion or high-pressure water jets directly on the electrical connections.

5. Troubleshooting
5.1 Common Issues and Solutions
- Lights not turning on:
- Check all wiring connections for looseness or corrosion.
- Verify the power source (battery, ACC) is providing adequate voltage (9V-32V DC).
- Ensure the wireless switch has power and is functioning correctly.
- Check the fuse in the wiring harness.
- Lights flickering or dim:
- Inspect wiring for poor connections or insufficient gauge wire.
- Confirm the vehicle's electrical system can support the 140W power draw. Consider installing an additional relay if not already present, especially for high-power applications.
- Check for voltage drops across the circuit.
- Wireless switch not responding:
- Ensure the switch is within range of the control module.
- Check for physical obstructions or strong electromagnetic interference between the switch and the control module.
- Verify the control module is installed in a location with minimal signal shielding (e.g., near the grille, not deep in the engine bay).
- One light not working:
- Check the individual connections to that specific lamp head and its drive.
- Swap the lamp head or drive with the working one to isolate the faulty component.
6. Specifications
| Attribute | Specification |
|---|---|
| Brand Name | SENLO |
| Model | X3 |
| Item Type | Other (Work Spotlights/Headlight) |
| Power | 140W/Pair |
| Actual Lumen | Up to 140000LM/Pair |
| Voltage | 9V-32V DC |
| Current | 5.8A |
| LED Type | High Quality Led Chips for CREE |
| Color Temperature | White 6000K / Yellow 3000K |
| Waterproof Rate | IP 68 |
| Working Temperature | -20℃ ~ +80℃ |
| Lifespan | 50,000 hours |
| Weight | 1.5kg/SET |
| Fan Rotation | 12,000RPM |
| Body Material | Aviation Aluminum Alloy |
| Workmanship | CNC Integrated Forming |
| Lamp Beads | Taiwan Crystal Yuan |
| Dimensions (approx.) | 73.8mm (W) x 106.8mm (L) x 32.8mm (H) |
| Application | Motorcycle, SUV, ATV, Truck, Electric Bicycle, Yacht, etc. |
| Certification | CE |
Note: Sizes are approximate. Manual measurement may cause minor differences.
7. Warranty and Support
7.1 Warranty Information
SENLO warrants to the first end-user that the product shall materially conform to SENLO published specifications in the user manual, subject to the terms and conditions below.
- Warranty Period: Two (2) Years (24 Months) from the date a new product is first delivered to the End-User after being purchased.
- What is Covered: The Standard Warranty provides support from SENLO as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for "replacements parts", "partial refund", "full refund" in the Warranty Period on any product due to manufacturing defects of components or workmanship.
- What is Not Covered: The warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of SENLO. The warranty does not cover accessory parts. SENLO is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.
7.2 How to Get Warranty Service
If you have any questions or need to request a replacement part, please feel free to contact our customer support either by phone, email, or through our Live Support system.
7.3 Additional Resources
A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and specifications.
- User Manual (PDF): For a complete guide, please refer to the User Manual (PDF).
8. User Tips
- Enhance Safety: Always ensure proper wiring and consider using an additional relay for high-power applications to protect your vehicle's electrical system.
- Optimal Visibility: Experiment with the different color temperature combinations (White 6000K and Yellow 3000K) to find the best setting for various weather conditions, such as clear nights or rainy/foggy days.
- Emergency Use: The strobe and alternating flash modes can be highly effective for increasing visibility and signaling in emergency situations or when parked on the side of the road.
- Installation Location: Prioritize installing the control module near the grille to minimize signal interference and ensure reliable operation of the wireless switch.