DJI Osmo Pocket 3

Contents

DJI Osmo Pocket 3 User Manual

v1.0 2024.03

1. Introduction

The DJI Osmo Pocket 3 is a handheld gimbal camera featuring three-axis mechanical stabilization, designed to capture smooth and stable videos in various scenarios. It incorporates a 1-inch CMOS sensor for low-noise, high-quality footage, even in high-contrast environments. The device supports 4K/120fps video recording and 10-bit D-Log M color mode for enhanced color perception and dynamic range, facilitating professional post-production color correction.

Key features include a 2-inch rotatable OLED touchscreen for live view, settings adjustment, and switching between horizontal and vertical shooting modes. The built-in three-mic array provides omnidirectional stereo recording with wind noise reduction. The Osmo Pocket 3 also supports external microphones and monitoring earphones for superior audio quality.

This manual provides essential information for operating and maintaining your Osmo Pocket 3. For additional resources, including safety guidelines and quick start guides, please refer to the official DJI website.

Product Highlights

  • 1-Inch CMOS & 4K/120fps
  • 2-Inch Rotatable Screen & Smart Horizontal-Vertical Shooting
  • 3-Axis Gimbal Mechanical Stabilization
  • ActiveTrack 6.0
  • Full-Pixel Fast Focusing
  • D-Log M & 10-Bit Color
  • Stereo Recording
  • Pocket-Sized Design

Overview

The following diagram illustrates the main components of the Osmo Pocket 3:

Diagram of Osmo Pocket 3 components

Osmo Pocket 3 with its main components: Camera, Protective Cover, and Handle with 1/4" Thread.

  1. Camera
  2. Pan Motor
  3. Microphones*
  4. Rotatable Touchscreen
  5. Speaker
  6. Status LED
  7. 5D Joystick
  8. microSD Card Slot
  9. Quick-Release Slot I
  10. USB-C Port
  11. Shutter/Record Button
  12. Quick-Release Slot II
  13. Lanyard Hole
  14. Tilt Motor
  15. Roll Motor

* For better audio quality, do not block the microphones when recording video.

2. Setup

2.1 Read Before Use

Before using your DJI Osmo Pocket 3, it is recommended to review the following documents:

  • Safety Guidelines
  • Quick Start Guide
  • User Manual (this document)

For first-time users, watching the tutorial videos on the official DJI website or within the DJI Mimo app is highly recommended. Ensure you read the safety guidelines thoroughly before initial use.

2.2 Download DJI Mimo App and Watch Tutorial Videos

The DJI Mimo app is essential for full functionality. Scan the QR code below to download the app and access tutorial videos.

QR code for DJI Mimo App download

Image showing the DJI Mimo App icon and a QR code for download. Compatible with iOS 12.0 or above and Android 8.0 or above.

2.3 Inserting the microSD Card

The Osmo Pocket 3 stores footage exclusively on a microSD card (not included). A UHS-I Speed Grade 3 rating is required for high-resolution video data. Refer to the Specifications section for recommended microSD cards.

To insert: Gently push the microSD card into the microSD card slot until it clicks into place.

To remove: Gently push the microSD card to partially eject it, then pull it out.

Diagram showing how to insert a microSD card into the Osmo Pocket 3

Image showing the Osmo Pocket 3 and its accessories, including a visual representation of inserting a microSD card.

2.4 Powering On/Off

To power on: Rotate the touchscreen clockwise or press the Shutter/Record button.

If 'Screen Rotate & Capture' is enabled in the control menu, the camera will start recording immediately upon rotating the touchscreen. The shooting mode will be based on your settings for this function.

To power off: The camera will automatically power off if idle for two seconds after shooting. Alternatively, press the Shutter/Record button for one second or rotate the touchscreen counterclockwise.

2.5 Activation

The camera must be activated using DJI Mimo before first use:

  1. Power on the Osmo Pocket 3.
  2. Enable Wi-Fi and Bluetooth on your mobile device.
  3. Launch DJI Mimo, tap the device icon to connect, and follow the on-screen instructions to activate.

2.6 Charging the Battery

Use the included Type-C to Type-C PD cable to connect a USB-C charger (not included) to the USB-C port at the bottom of the Osmo Pocket 3. It is recommended to use a DJI 65W Portable Charger, DJI 30W USB-C Charger, or other USB-C Power Delivery chargers.

When charging in the power-off state, the power status can be checked on the touchscreen. It takes approximately 16 minutes to charge the battery to 80% and 32 minutes for a full charge (tested with DJI 65W PD charger).

If the Osmo Pocket 3 Handle With 1/4" Thread or Osmo Pocket 3 Battery Handle is mounted, use the USB-C port on the rear of the handle for charging. Note that if the battery handle is mounted, it will only start charging after the handheld gimbal camera's battery is fully charged.

2.7 Accessories

Osmo Pocket 3 Handle With 1/4" Thread

This handle improves grip comfort. Connect it to the USB-C port at the bottom of the Osmo Pocket 3. Its rear USB-C port can be used for charging or connecting external audio devices (wired digital headphones, wired microphones, wireless microphone receiver).

Diagram showing attachment of the 1/4 inch thread handle to Osmo Pocket 3

Image illustrating how to attach the Osmo Pocket 3 Handle with 1/4" Thread.

Note: After extended high-specification video shooting, the upper part of the product may become hot. Avoid holding too high to prevent high temperatures.

To detach: Press and hold the release button on the handle and unplug it.

Osmo Pocket 3 Battery Handle

This handle has a built-in 950mAh battery to extend operating time. Mount it to the USB-C port at the bottom of the Osmo Pocket 3, ensuring clips lock into place. The power level can be checked on the touchscreen. Its rear USB-C port can be used for charging or connecting external audio devices.

Diagram showing attachment of the battery handle to Osmo Pocket 3 and battery level indicator

Image illustrating how to attach the Osmo Pocket 3 Battery Handle and how to check its battery level via the status LED.

To detach: Press and hold the release button on the battery handle and unplug it. After detaching, press the release button once to check the battery level using the status LED.

Battery Handle Status LED
Battery Level DescriptionsBattery Level
Solid red for 3s and turns off1%-19%
Solid yellow for 3s and turns off20% - 49%
Solid green for 3s and turns off50% - 100%
Blinks red three times0%

Osmo Pocket 3 Wide-Angle Lens

Attach the magnetic Wide-Angle Lens to the camera to achieve a 108° FOV and 15mm equivalent focal length. When powered off with the lens attached, the camera faces the same direction as the touchscreen and can be stored in the Protective Cover. The lens can also be detached and stored in the Protective Cover's dedicated slot.

Diagram showing attachment of the wide-angle lens to Osmo Pocket 3

Image illustrating the magnetic attachment of the Osmo Pocket 3 Wide-Angle Lens.

Osmo Mini Tripod

Both the handle and battery handle feature a 1/4" screw hole at the bottom for installing the Osmo Mini Tripod. This allows the Osmo Pocket 3 to stand on flat surfaces for fixed-position shooting.

Optional Accessories (Not Included)

  • Osmo Pocket 3 Black Mist Filter: Magnetic design for easy attachment. Controls highlight flares, lowers image sharpness, and softens skin tones.
  • Osmo Pocket 3 Magnetic ND Filters Set: Includes ND16, ND64, and ND256 filters with magnetic design for easy attachment/detachment.
  • Osmo Pocket 3 Expansion Adapter: Used to install an action camera or other accessories via a cold shoe mount.

3. Operation

3.1 Basic Operations

Shutter/Record Button

OperationDescription
Press once (in live view)Take a photo or start/stop recording
Press once (when powered off)Power on
Press and hold for 1 secondPower off

5D Joystick

Diagram showing 5D joystick controls for pan and tilt

Image illustrating the 5D Joystick and its control over the gimbal's pan and tilt axes.

OperationDescription
Press onceBack
Press twiceRecenter the gimbal
Press three timesSwitch camera between facing forward and backward
Push left or rightControl camera movement in the pan axis
Push up or pull downControl camera tilt or zoom
Press and holdLock the gimbal

Operating the Touchscreen

The touchscreen displays live view and information like shooting mode, battery level, and microSD card status. Tap or swipe to interact.

  • Tap once: Select features (smart gimbal mode, rotate camera), tap live view for focusing/spot metering.
  • Tap twice: Select a subject for ActiveTrack.
  • Swipe down: Enter the control menu.
  • Swipe up: Set shooting parameters (Aspect Ratio, Countdown Timer, Resolution).
  • Swipe right from left edge: Enter playback to view footage.
  • Swipe left from right edge: Adjust image and audio parameters.

3.2 Using the Product

Setting the Shooting Mode

Tap the shooting mode icon on the touchscreen and swipe to select from Panorama, Photo, Video, Low-Light, Slow Motion, and Timelapse.

Shooting Mode Descriptions
ModeDescription
PanoramaCaptures multiple photos to stitch into an ultra-wide panoramic image. Includes 180° and 3x3 modes.
PhotoStandard photo capture, with options for Aspect Ratio and Countdown Timer.
VideoRecords video with adjustable resolution, frame rate, and aspect ratio.
Low-LightAutomatically adjusts exposure parameters for improved image quality in low-light conditions.
Slow MotionSupports 4x or 8x slow-motion video. Records at high frame rates and slows footage during playback. Audio is saved as a separate file.
TimelapseCaptures frames at set intervals to create short videos. Includes Hyperlapse (for motion), Timelapse (for static scenes), and Motionlapse (for moving between preset positions).

Selecting the Gimbal Mode

Swipe down from the top of the screen to enter the control menu, then tap the gimbal icon to select a mode.

Diagram showing the three gimbal modes: Follow, Tilt Locked, and FPV

Image illustrating the different gimbal modes: Follow, Tilt Locked, and FPV.

  • Follow (Default): Pan and tilt axes follow the handle, roll axis remains level. Ideal for vlogs and selfies.
  • Tilt Locked: Only the pan axis follows, tilt and roll axes are locked. Suitable for scenarios with changing camera positions (high to low).
  • FPV: Camera rotates freely and follows handle movement, offering less stability but dynamic shots.

Using ActiveTrack

In Photo or Video mode, double-tap the touchscreen to select a subject and enable ActiveTrack. The gimbal camera will automatically follow the selected subject. Press the 5D joystick or tap the touchscreen to exit ActiveTrack.

When FT (Selfie) is enabled, the camera automatically recognizes and tracks your face for optimal selfie angles.

Note: ActiveTrack is not available in Panorama, Low-Light, Slow Motion (1080P 8X/4K 4X), Timelapse, Motionlapse, or when SpinShot is enabled.

Using the Smart Gimbal Mode

In Video mode, tap the smart gimbal mode icon to select from the following options:

  • Face Auto-Detect Mode: Camera automatically follows the face closest to the center of the view.
  • Dynamic Framing Mode: Select a subject position (golden ratio or rule of thirds) via the 5D joystick. The camera tracks the subject while maintaining its position within the frame.
  • SpinShot Mode: Camera automatically rotates 90° or 180° during shooting.

3.3 Transferring Files

Transferring Files to a Phone

Connect Osmo Pocket 3 to DJI Mimo, tap the Playback icon to preview photos and videos. Use the download icon to transfer files. Files can be shared directly from DJI Mimo to social media.

Transferring Files to a Computer

Power on Osmo Pocket 3 and connect it to a computer using a USB-C cable. A pop-up will appear; tap 'Transfer File/OTG Connection' to download files. The camera cannot take photos or record videos during file transfer. Select 'Cancel' to only charge the device.

OTG Connection for Transferring Files (Android)

For Android devices supporting OTG, connect the camera to the Android device with the Type-C to Type-C PD cable (included) using the USB-C port on Osmo Pocket 3. View and transfer photos/videos via the device album or file management.

Tip: If the camera doesn't automatically recognize the Android device, swipe down from the screen, go to Settings > OTG Connection, and then connect the cable.

3.4 Webcam Mode

Osmo Pocket 3 can function as a webcam. Power on the device and connect it to a computer via USB. Tap 'Webcam' on the device screen to enter Webcam mode. The device will then act as a webcam input device. You can adjust parameters like Exposure, White Balance, and Focus Mode by swiping left from the right edge of the screen.

3.5 Microphone Connection

Osmo Pocket 3 supports external microphones, including DJI Mic, DJI Mic 2, or third-party digital USB-C microphones (48K/16bit).

DJI Mic 2 Transmitter Overview

Diagram of DJI Mic 2 Transmitter components

Image showing the DJI Mic 2 Transmitter with its labeled components.

  1. Recording Status LED: Indicates recording status.
  2. Data Port (USB-C): For charging, copying audio files, or firmware updates.
  3. Record Button: Starts/stops standalone recording.
  4. 3.5mm TRS Input: For external microphones. Do NOT connect microphones requiring 24V or 48V power.
  5. System Status LED: Indicates transmitter system status.
  6. Linking Button: Press and hold for 2 seconds to start Bluetooth linking. Press once to start/stop recording when linked.
  7. Power Button: Press and hold for 2 seconds to power on/off. Press once to enable/disable noise cancelling.

DJI Mic 2 Transmitter Status LEDs

Recording Status LED
Blinking PatternDescription
Solid redRecording independently
Pulses redTransmitter muted
OffNot recording independently
System Status LED (Linking)
Blinking PatternDescription
Solid greenLinked with receiver
Blinks green slowlyNot linked with receiver
Blinks green quicklyLinking
Solid blueLinked with a Bluetooth device
Blinks blue slowlyNo Bluetooth device linked
Blinks blue quicklyLinking
System Status LED (Noise Reduction)
Blinking PatternDescription
Solid yellowNoise reduction enabled (linked to DJI Mic 2 receiver or other Bluetooth devices)
Blinks yellowNoise reduction enabled (not linked to DJI Mic 2 receiver or other Bluetooth devices)
Battery Level Descriptions
Blinking PatternDescription
Solid red0-10%
Blinks green slowly0-25% (during charging)
Blinks green twice26-50% (during charging)
Blinks green three times51-75% (during charging)
Blinks green four times76-100% (during charging)
OffFully charged

Connecting to DJI Mic 2

  1. Swipe down from the screen, enter control menu, tap settings icon, select Wireless Mic > TX1/TX2.
  2. Press and hold the transmitter's power button for two seconds to power on.
  3. Ensure the transmitter is in Bluetooth linking mode (system status indicator solid green, then press and hold record button for three seconds to switch to Bluetooth linking mode).
  4. Press and hold the transmitter's linking button for two seconds. It will search for nearby Bluetooth devices (system status indicator blinks blue quickly).
  5. Once successfully linked, the system status indicator will be solid blue. Press the linking button on the transmitter to start/stop recording for audio.

Note: If purchased as a combo, Osmo Pocket 3 and DJI Mic 2 Transmitter are linked automatically. Osmo Pocket 3 can link with up to two DJI Mic 2 transmitters simultaneously. For more detailed information, refer to the DJI Mic 2 User Manual available at dji.com/mic-2/downloads.

Connecting to DJI Mic

  1. Power on the DJI Mic receiver and transmitter, ensuring they are linked.
  2. Use the USB-C mobile phone adapter (included) to connect the receiver to the USB-C port on the camera. An input volume bar will display on the touchscreen.
  3. Press the linking button on the transmitter to start recording audio. Press again to stop.

Tip: If the transmitter and receiver are disconnected, place them in the charging case to link automatically, or power them on, press and hold the transmitter's linking button, then slide down on the receiver screen, select Settings, and tap Link Device. A solid green status LED indicates successful linking.

3.6 DJI Mimo App

The DJI Mimo app allows you to monitor the camera view, set parameters, control the camera, transfer, edit, and share files, and livestream via Wi-Fi.

Connecting to the DJI Mimo App

  1. Power on Osmo Pocket 3.
  2. Enable Wi-Fi and Bluetooth on your mobile device.
  3. Launch DJI Mimo, tap the device icon, and follow instructions to connect.

Note: If Osmo Pocket 3 is linked with DJI Mic 2 Transmitter and operating in 2.4GHz Wi-Fi, DJI Mimo cannot connect. Change Osmo Pocket 3's Wi-Fi frequency band to 5.8GHz or disconnect DJI Mic 2 Transmitter. If connection issues persist, ensure both Wi-Fi and Bluetooth are enabled, DJI Mimo is updated, and reset connections via Settings > Wireless Connection > Reset Connection on the camera.

4. Maintenance

4.1 Firmware Update

Use DJI Mimo to update the device firmware. Ensure the battery level is above 15% before updating. Connect the device to DJI Mimo; if new firmware is available, a prompt will appear. Follow the on-screen instructions. Updates typically take about 2 minutes.

4.2 Storing

Osmo Pocket 3 can be stored in the Osmo Pocket 3 Protective Cover or the Osmo Pocket 3 Carrying Bag.

Using the Osmo Pocket 3 Protective Cover

Power off the handheld gimbal camera. Store it in the protective cover with the touchscreen facing downward. The handle does not need to be detached. The cover has dedicated storage for the Osmo Pocket 3 Black Mist Filter, Wide-Angle Lens, and DJI Mic 2 Transmitter.

Important: To prevent unnecessary gimbal and screen damage, ensure the Osmo Pocket 3 is placed into the protective case correctly.

Using the Osmo Pocket 3 Carrying Bag

Power off the gimbal camera and store all devices in the carrying bag as shown in the illustration. The carrying bag is designed to store the Osmo Pocket 3 Creator Combo and all its accessories.

Diagram showing how to store Osmo Pocket 3 and accessories in the carrying bag

Image illustrating the organized storage of the Osmo Pocket 3 and its accessories within the carrying bag.

5. Troubleshooting

5.1 General Usage Notices

  • Impact Damage: Intricate components may be damaged by impact, causing gimbal malfunction. Handle with care. Keep the product away from sand and dust.
  • Gimbal Obstruction: Ensure nothing obstructs the gimbal when powered on.
  • Axis Lock: Do not manually adjust the axis lock frequently to avoid malfunction.
  • Water Resistance: The camera is NOT water resistant. Avoid spilling liquids or using liquid cleansers. Use a soft, dry cloth for cleaning.
  • Overheating: Do not cover or touch the ventilation area during use, as the camera may become hot. It will stop shooting if it overheats.
  • Vibrations: Avoid using the device in environments with high-amplitude vibrations (e.g., mounted on a motorcycle handlebar) to prevent damage to the camera system and gimbal.
  • Screen Friction: Slight friction between the screen frame and body during rotation is normal and does not affect use.
  • Laser Exposure: Do not expose the camera lens to laser beams (e.g., laser shows) to avoid damaging the camera sensor.

5.2 Status LED Indicators for Troubleshooting

Osmo Pocket 3 Status LED
Blinking PatternDescription
Blinks red three times rapidlyPowering off, or about to power off due to low battery.
Blinks red and green alternatelyFirmware updating.
Battery Handle Status LED (Troubleshooting)
Blinking PatternDescription
Blinks red twiceBattery handle cannot be used due to too high or low temperatures. Wait for temperature to normalize.
Blinks yellowUpdating firmware failed. Attach to camera and try again.

5.3 Firmware Update Issues

  • If DJI Mimo prompts for a firmware update, ensure the battery level is above 15%.
  • If the battery handle firmware update fails (blinks yellow), re-attach it to the camera and try again. Do not unplug the handle during the update process.

5.4 Connection Issues

  • If DJI Mimo cannot connect when DJI Mic 2 Transmitter is linked and operating in 2.4GHz Wi-Fi, change Osmo Pocket 3's Wi-Fi frequency band to 5.8GHz or disconnect the DJI Mic 2 Transmitter.
  • If general connection problems occur with DJI Mimo, ensure Wi-Fi and Bluetooth are enabled on your mobile device, DJI Mimo is updated, and try resetting connections via the camera's control menu (Settings > Wireless Connection > Reset Connection).
  • If file transfer to computer is interrupted, reconnect the device.
  • If OTG connection to Android device is not automatically recognized, swipe down from screen, go to Settings > OTG Connection, and then connect the cable.

6. Specifications

For detailed and up-to-date specifications, please visit the official DJI website:

https://www.dji.com/osmo-pocket-3/specs

Key Specifications:

  • Size: 124.7*38.1*30 mm
  • Weight: 117g
  • Type: Handheld Gimbal
  • Number of Axes: 3-Axis
  • Configured For: Smartphones
  • Communication: WiFi, Bluetooth, Wired
  • Battery Included: Yes
  • Support Remote Control: Yes
  • Vertical Shooting: Yes
  • App Setting: Yes
  • Camera Integration: Yes
  • Max Controllable Speed: 120C/s
  • Panning Angle: -230° to +70°
  • Rolling Angle: ±45°
  • Titling Angle: -100° to +50°
  • Feature: Smile Snapshot, Following the shooting mode, Face Recognition
  • Material: Carbon Fiber
  • Certification: CE, FCC

7. Warranty and Support

This content is subject to change. For the latest information and support, please visit the official DJI website.

QR code for DJI Support

Scan for DJI Support

If you have any questions about this document or require technical assistance, please contact DJI by sending a message to DocSupport@dji.com.

For downloads and additional resources, visit:

https://www.dji.com/osmo-pocket-3/downloads

DJI and OSMO are trademarks of DJI. Copyright © 2024 DJI OSMO All Rights Reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.