IEEYEEY USB Projector Light

Contents

USB Projector Light Instruction Manual

Model: USB Projector Light | Brand: IEEYEEY

1. Introduction

The IEEYEEY USB Projector Light is designed to enhance the atmosphere of any room, ceiling, or window with various switchable patterns, including Christmas Elk and Santa Claus themes. This product is intended for decorative lighting purposes only.

USB Projector Light casting a Christmas scene on a wall

Image: The USB Projector Light projecting a festive Christmas scene.

2. Product Safety and Warnings

  • This product is for decorative lighting purposes only.
  • Ensure the product is not damaged before use to avoid potential hazards. Do not use damaged items.
  • This item is not a toy and should not be disassembled.
  • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Setup Instructions

3.1 Power Connection

Remove the projector light from its packaging. Connect the USB plug to an appropriate 5V power source, such as a laptop, power bank, or a USB outlet adapter. No specific adapter is required, offering flexible power options.

USB projector light connected to a car's USB port

Image: The projector light connected via USB, demonstrating its plug-and-play functionality.

3.2 Inserting/Replacing Projection Slides

The projection slides have a front and a back side. To ensure clear visibility and proper projection, the side of the slide with the four corner markers must face forward when inserted into the projector.

Diagram showing the correct orientation of the projector slide with corner markers

Image: Correct orientation for inserting the projection slide.

To replace a slide, simply pull out the current light sheet and plug in the desired new one. This easy replacement mechanism allows for quick changes of patterns.

Image illustrating how to easily replace the light sheet in the projector

Image: Easy lamp replacement by pulling and plugging the light sheet.

4. Operating Instructions

Once powered on and with a slide inserted, the projector will display the chosen pattern. The flexible neck allows for 360-degree rotation, enabling you to adjust the projection angle and direction to suit your preference.

Multiple projector lights creating various patterns on walls and ceiling

Image: Multiple projector lights used to create diverse patterns on walls and ceiling.

The projector features high-definition lenses for full HD image quality, high transmittance, high refractive index, and low color dispersion. This results in a 35% brightness enhancement and 300% improved imaging.

Diagram showing high-definition lenses with brightness and imaging improvements

Image: High-definition lenses for enhanced brightness and imaging.

Different styles and patterns are available to choose from, allowing you to customize the ambiance for various occasions.

Image displaying various projection styles like Santa, snowmen, and winter cabin

Image: Examples of different projection styles available.

4.1 Changing Patterns (Video Demonstration)

Video: This video demonstrates how to change the projection patterns by swapping out the slides.

5. Maintenance

The projector light is designed for ease of use and minimal maintenance. As it is not intended to be disassembled, there are no user-serviceable parts beyond replacing the projection slides.

  • Keep the device clean and free from dust to ensure optimal projection quality.
  • Do not attempt to open or repair the device.
  • Store in a dry place when not in use.

6. Troubleshooting

6.1 Common Issues

  • Projector not working / No light: Ensure the USB cable is securely connected to a 5V power source. Check if the power source is active. Verify that a projection slide is correctly inserted.
  • Light is too low / Image unclear: Adjust the distance of the projector from the projection surface. Ensure the lens is clean and free from smudges. Make sure the slide is inserted with the correct orientation (four corner markers facing forward).

6.2 FCC Interference Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  3. Consult the dealer or an experienced radio/TV technician for help.

7. Specifications

Feature Specification
Brand Name IEEYEEY
Luminous Flux 60-249 lumens
Nominal Voltage 5V
Power Source DC
Light Source LED bulbs
Is Bulbs Included Yes
Is Dimmable No
Remote Control No
Body Material ABS
Package Dimensions (L x W x H) 15 cm x 14 cm x 2 cm
Package Weight 0.049 kg
Certification RoHs, EMC, CE

8. User Tips

  • For Kids' Rooms: This projector light is a great addition to children's rooms, providing a fun and festive ambiance.
  • Easy to Use: The simple plug-and-play design makes it very functional and easy to operate.
  • Pattern Variety: While multiple patterns are available, some users find certain patterns to be more appealing than others. Experiment to find your favorites.
  • Brightness: The light output is suitable for creating an atmospheric glow. For brighter projections, ensure the room is dark and the projection surface is close.

9. Warranty and Support

For any issues or questions regarding your USB Projector Light, please refer to the following:

  • Free Returns: The product is eligible for free returns within 15 days of receipt.
  • Refunds for Issues: Refunds may be available if items are damaged or if there is no delivery within 30 days.
  • Official Documentation: A user manual in PDF format is available for detailed information. You can access it via this link: User Manual (PDF).
  • Technical Assistance: For technical support or assistance with FCC interference, consult the dealer or an experienced radio/TV technician.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.