KHUDAYAROV m04

Contents

IP CCTV Audio Microphone Module Instruction Manual

Model: m04 | Brand: KHUDAYAROV

1. Product Overview

This document provides instructions for the KHUDAYAROV m04 IP CCTV Audio Microphone Module. This is an add-on mini audio box designed to provide audio functionality to compatible IP cameras or other camera systems requiring an audio input.

  • High-sensitivity microphone with a built-in 12V power regulator.
  • Designed for plug-and-play installation.
  • Extremely sensitive, ideal for security monitoring applications.
  • Features a high Signal-to-Noise (S/N) Ratio for clear audio.
  • Effective audio capture range of up to 150 square metres.

Note: The IP camera board is not included with this module and must be purchased separately.

2. Setup and Installation

Follow these steps to correctly install your audio microphone module:

  1. Identify Components: Unpack the module. You will find the main circuit board with integrated microphone and connecting wires.
  2. Prepare Camera Board: Ensure your IP camera board or recording device has a compatible audio input port. Refer to your camera's manual for specific audio input requirements.
  3. Wiring Connections: The module comes with four wires for connection. Carefully match these to the corresponding ports on your camera board or power supply:
    • Red wire: Power Positive (+)
    • Black wire: Power Negative (-)
    • S- (Black signal wire): Audio Signal Ground
    • S+ (Green signal wire): Audio Signal Output

    Ensure correct polarity for power connections to prevent damage to the module or camera.

  4. Secure Connection: Once wired, ensure all connections are secure and insulated to prevent short circuits.
  5. Mounting (Optional): Position the microphone module in a location where it can best capture audio, away from excessive noise sources or direct weather exposure if used outdoors (ensure it's housed in a protective enclosure).
IP Camera Audio Microphone Module top view with wires connected

Figure 1: Audio Microphone Module with wiring connections.

Mini Microphone Component close-up

Figure 2: Close-up of the mini microphone component.

3. Operating Instructions

The KHUDAYAROV m04 audio microphone module operates passively once correctly installed and powered. No direct user interaction is required for its operation after setup.

  • Ensure the camera system it is connected to is powered on and configured to record audio from its input.
  • The microphone will capture ambient sounds within its effective range (up to 150 square metres) and transmit them as an audio signal to the connected device.
  • Adjust audio recording settings (e.g., sensitivity, gain) on your camera or NVR system if available, to optimize audio quality.

4. Maintenance

This audio microphone module requires minimal maintenance to ensure optimal performance.

  • Cleaning: If dust accumulates on the microphone element, gently clean it with a soft, dry brush or a can of compressed air. Avoid using liquids or abrasive cleaners.
  • Environment: Keep the module in a dry environment. Avoid exposure to extreme temperatures, high humidity, or direct water contact. If installed outdoors, ensure it is housed within a weather-proof enclosure.
  • Connections: Periodically check wiring connections to ensure they remain secure and free from corrosion.

5. Troubleshooting

If you encounter issues with your audio microphone module, refer to the following troubleshooting guide:

ProblemPossible CauseSolution
No audio output
  • Incorrect wiring (power or signal).
  • No power supply to the module.
  • Camera audio input disabled or misconfigured.
  • Faulty module or camera input.
  • Verify all wiring connections according to Section 2.
  • Ensure the module is receiving 4-14V power.
  • Check your camera/NVR settings to enable and configure audio input.
  • Test with another known-good audio input or module if possible.
Poor audio quality (static, low volume, distorted)
  • Electrical interference.
  • Microphone too far from sound source.
  • Microphone obstructed.
  • Incorrect audio settings on camera.
  • Ensure signal wires are not running parallel to high-voltage cables.
  • Relocate the microphone closer to the desired sound source.
  • Ensure the microphone is not covered or blocked.
  • Adjust audio gain or sensitivity settings on your camera/NVR.

6. Specifications

FeatureSpecification
Model Numberm04
Brand NameKHUDAYAROV
Work Voltage4-14V DC
Work Current5mA-60mA
Sensitivity200mA/ubar
Frequency Response100-6000Hz
Max Output Voltage5V-upp
Audio Capture RangeUp to 150 square metres
Package Length10 cm
Package Width8 cm
Package Height2 cm
Package Weight0.05 kg
CertificationCE

7. User Tips

No specific user tips were available from customer reviews or Q&A for this product.

8. Warranty and Support

This KHUDAYAROV m04 Audio Microphone Module comes with a One Year Warranty from the date of purchase.

For technical support or warranty claims, please refer to your purchase documentation for seller contact information.

A PDF user manual is available for download from the seller's product page: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.