1. Introduction
The RAVEMEN FR1000 is an integrated bike headlight and computer bracket designed for cyclists seeking enhanced visibility, convenience, and power. It combines a powerful 1000-lumen front light with a versatile mount compatible with various GPS bike computers and action cameras. This manual provides essential information for the safe and effective use of your FR1000 headlight.
2. Package Contents
Please check the package for the following items:

Image: RAVEMEN FR1000 package contents
- 1x RAVEMEN FR1000 Light (Standard compatible with GARMIN)
- 1x ABM20 Handlebar Bracket (for 31.8mm and 35mm diameter round handlebars)
- 1x Adapter compatible with Wahoo
- 1x Adapter compatible with Bryton
- 1x AGX03 Adapter compatible with GOPRO
- 1x Charging cable (USB-C to USB-C)
- 1x Charging cable (USB-C to Micro USB)
- 1x User Manual
- 1x AGM04 Adapter (Free gift)
3. Setup
3.1. Handlebar Mounting
The ABM20 Handlebar Bracket is designed for 31.8mm and 35mm diameter round handlebars. Use the provided silicone shims (one thick, one thin) to ensure a snug fit.
- Place the ABM20 bracket on your handlebar.
- Insert the screw and tighten it securely with the provided hex key.
- Slide the FR1000 light onto the bracket until it clicks into place.

Image: Attaching the FR1000 to the handlebar mount
3.2. Bike Computer and Action Camera Installation
The FR1000 features an integrated design for your bike computer and a detachable GoPro mount.
- Bike Computer: The top mount is compatible with Garmin standard bases. Use the included Wahoo or Bryton adapters if needed. Simply twist your bike computer onto the top mount.
- Action Camera: The AGX03 adapter allows you to attach a GoPro or compatible action camera to the underside of the FR1000. Secure it with the appropriate screw.

Image: FR1000 with bike computer and action camera mounted
3.3. Initial Charging
Before first use, fully charge your FR1000 headlight. Use a qualified USB power adapter (5V, 1A output recommended) and the provided USB-C charging cable.
- Open the USB-C port cover on the side of the light.
- Connect the USB-C cable to the light and the other end to a USB power source.
- The charging indicator will blink red during charging and turn solid green when fully charged.
- Ensure the charging port is dry and clean before charging.

Image: USB-C charging port and power indicator
4. Operating Instructions
4.1. Power On/Off and Mode Cycling
- Power On/Off: Press and hold the power button for 1.5 seconds.
- Mode Cycling: With the light on, click the power button to cycle through the brightness modes (High, Mid, Low, Eco) and Pulse Flashing mode.
4.2. Auto On/Off Mode
This intelligent mode helps conserve battery life.
- Activation: With the light off, press and hold the power button for 3 seconds until the light blinks quickly.
- Function: In this mode, the light will automatically turn off after being stationary for 2 minutes and will turn back on with vibration (movement).
- Deactivation: Turn off the light, then press and hold the power button for 3 seconds until the light blinks slowly.

Image: Auto On-Off Mode operation
4.3. Battery Indicator
When the light is off, a single click of the power button will activate the battery level indicator without turning on the main light:
- Green Light: 40% - 100% battery remaining
- Red Light: 5% - 40% battery remaining
- Flashing Red Light: Less than 5% battery remaining (charge soon)

Image: Battery status indicator
4.4. Power Bank Functionality
The FR1000 features a 3000mAh battery that can provide emergency charging for your bike computer or mobile phone.
- Open the USB-C port cover.
- Connect your device to the FR1000 using the appropriate charging cable.
- The FR1000 can be turned on while acting as a power bank, but only Low and Eco brightness modes are available. Mid and High brightness modes cannot be used simultaneously.

Image: FR1000 used as a power bank to charge a bike computer
4.5. Adjustable Beam Angle
The light head angle can be adjusted freely from 0° to 30° to suit your lighting needs for various riding scenarios.

Image: Adjustable beam angle up to 30 degrees
4.6. Daytime Warning Mode
The FR1000 features a 500-lumen high-brightness flash mode to increase your visibility to others during daytime riding, enhancing safety.

Image: Daytime warning mode in use
4.7. Quick Release Design
The FR1000 features a quick-release mechanism, allowing for easy removal for charging or storage, and quick re-installation.

Image: Quick release mechanism
5. Maintenance
5.1. Charging Guidelines
- Always use a qualified 5V, 1A USB power adapter.
- Keep the charging port dry and clean to prevent damage.
- Do not use the light in rain when the charging port is connected, as it is not water-resistant in this state.
5.2. Waterproofing
The FR1000 has an IPX6 waterproof rating. To maintain its waterproof integrity, ensure the USB-C charging port cover is securely tightened before any outdoor biking, especially in wet conditions.

Image: IPX6 Waterproof design
5.3. Cleaning
Wipe the light body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
6.1. Light Not Turning On
- Ensure the battery is charged. Check the battery indicator by single-clicking the power button when the light is off.
- If the battery is fully charged and the light still doesn't turn on, try resetting by connecting it to a charger for a few seconds.
6.2. Not Charging
- Verify that the USB-C cable is properly connected to both the light and the power adapter.
- Try using a different USB-C cable or power adapter (ensure it's 5V, 1A).
- Ensure the charging port is clean and free of debris.
- Some fast chargers may not be compatible due to different charging protocols. Try a standard 5V, 1A charger.
6.3. Auto On/Off Mode Not Working
- Ensure the mode is correctly activated (light blinks quickly upon activation).
- The sensor relies on vibration; ensure the light is securely mounted and the bike is experiencing movement.
7. Specifications
| Feature | Details |
|---|---|
| LED | High-efficiency LED |
| Brightness Modes | High (1000 lm), Mid (500 lm), Low (300 lm), Eco (150 lm), Pulse Flashing (500 lm) |
| Run Time | High: 2.5h, Mid: 3.5h, Low: 7h, Eco: 10h, Pulse Flashing: 39h |
| Battery | 3000mAh/3.7V rechargeable Li-polymer battery |
| Charging Time | Approx. 2.7 hours (5V, 1A input) |
| Output (Power Bank) | 5V, 1A |
| Beam Distance | 140 meters |
| Water Resistance | IPX6 |
| Impact Resistance | 1 meter |
| Dimensions (Headlight) | 108mm (L) x 39.8mm (W) x 34.5mm (H) |
| Weight (Headlight) | 130g |
| Body Material | Aluminum alloy |
| Mounting Placement | Handlebar (31.8mm & 35mm) |
| Certification | CE, FCC, RoHS |
8. User Tips
- Integrated Setup: Many users appreciate the all-in-one design, allowing for a cleaner cockpit by integrating the light, bike computer, and action camera.
- Power Bank Use: The power bank feature is excellent for emergency charging of your bike computer on long rides. Remember that only Low and Eco light modes are available when charging another device.
- Night Riding: The 1000-lumen output is highly effective for night riding, providing ample illumination.
- Handlebar Compatibility: Ensure your handlebar is 31.8mm or 35mm in diameter for proper fitment of the included bracket.
9. Warranty and Support
9.1. Warranty Policy
- Product Warranty: Two years warranty for the product to be free of defects in material and workmanship from the day of purchase under normal use.
- Accessories & Battery: One-year warranty for accessories and battery.
- Support: Limited lifetime warranty support.
- Exclusions: Warranty does not cover normal wear/tear, normal battery deterioration, improper use/maintenance, unauthorized modifications, or lack of sales receipt/proof of purchase.
9.2. Customer Support
For warranty service or any inquiries, please contact your retailer or RAVEMEN customer support.
Do not look directly into the light beam. Keep out of reach of children. Do not dispose of the battery in fire.