Introduction
Thank you for choosing our AC to DC power transformer. This user manual is designed to guide you through the proper use of our product, ensuring safe and efficient operation of your LED Cabinet Driver.
For a complete and detailed guide, you may also refer to the User Manual (PDF).
Product Overview
The LED Cabinet Driver is an ultra-thin, fanless, and noiseless power supply designed for various LED lighting applications. It converts AC input voltage to a stable DC12V output, suitable for LED strip lights, cabinet lights, shelf lights, routers, displays, CCTV, speakers, lamps, and fans. It features top-grade components including a high-quality large capacitor, pure copper transformer, and large-size chip for reliable performance.


Specifications
| Attribute | Detail |
|---|---|
| Input Voltage | AC 180-240V (Nominal: 120V-240V; Worldwide Input: AC100-240V or AC180-240V, varies based on transformer) |
| Output Voltage | DC 12V |
| Input Signal | AC |
| Output Signal | DC |
| Frequency | 50/60Hz |
| Plug Type | EU Plug |
| Material | Plastic / Aluminum case |
| Features | Ultra Thin, No Fan, No Noise |
| Certification | CCC, CE, ROHS |
| IP Rating | IP20 |
| Operating Temperature | Ta: 40°C, Tc: 65°C |
| High-concerned chemical | None |
| Item Type | Lighting Transformers |
| Applications | LED Strip Light, Router, Display, CCTV, Speaker, Lamp, Fan |
| Power Cord Length | 120 cm (for 36W model, may vary for others) |
Model Specifics:
| Power | Output Current | Max Power | Size (L*W*H) |
|---|---|---|---|
| 36W (Model: CB01-36-12) | 3A | 36W | 135mm*55mm*19mm |
| 60W (Model: CB01-60-12) | 5A | 60W | 170mm*60mm*20mm |
| 100W (Model: CB01-100-12) | 8.3A | 100W | 200mm*60mm*20mm |
| 150W (Model: CB02-150-12) | 12.5A | 150W | 202mm*62mm*20mm |


Setup and Installation
How to Choose the Right AC Power Adapter:
- Check Device Voltage: Find the specifications label on your device and check its working voltage. The device's DC-input voltage should match the output voltage of this power adapter (DC12V). Mismatched voltage can cause the device to malfunction or be damaged.
- Check Device Current: Determine the maximum current your device will draw. The device's DC-input current should be equal to or less than the output current of this power adapter. Exceeding the power adapter's output current capacity will lead to poor performance and potential damage to the power supply.
- Verify Power Input Port: Ensure the outer diameter, inner core diameter, inner core polarity, and exterior polarity of your device's power input port exactly match this power adapter.
- Reference Existing Power Supply: If you have an existing power supply, ensure its output voltage, plug size, and polarity are identical. Our power supply will work if its current rating is equal to or higher than your original one.
Connecting the LED Cabinet Driver:
The LED Cabinet Driver features an input power jack for AC power, and various output ports for connecting LED lights and sensors.

- Input Power Jack: Connect the AC power cord (EU plug provided) to this jack.
- Sensor Input: Use the 3PIN or 4PIN centralized control interface to connect compatible sensors for control.
- Dupont Output Interface: Connect LED strip lights or cabinet lights using the 2PIN Dupont ports.
Wiring Diagrams:
Below are examples of how to wire the LED Cabinet Driver with centralized and individual control sensors. Note that LED sensors and LED cabinet lights need to be purchased separately.

- Centralized Control Sensor: One sensor connected to the driver can control multiple cabinet lights or LED strips.
- Individual Control Sensor: Multiple sensors can be connected to the driver, each controlling a separate cabinet light or LED strip.
Operation
Once the LED Cabinet Driver is correctly installed and connected to your LED lights and sensors, ensure the power plug is securely inserted into a working AC power source (180-240V). The driver will convert the AC input to DC12V for your connected devices. Operate your connected LED lights and sensors according to their respective instructions.
Maintenance
- Regular Recharging: If the AC power adapter is left unpowered for long periods, it may be susceptible to damage. Recharge it regularly to keep its internal electronics active and prevent damage from prolonged absence of current.
- Environmental Conditions: Keep the adapter away from water or damp environments to avoid the risk of electrical hazard. Avoid exposure to external heat sources, direct prolonged sunlight, dust, and corrosive chemicals.
- Cleaning: Ensure the adapter is clean and free from dust buildup, which can affect performance and lifespan.
Troubleshooting
If you experience any issues with the AC power adapter, try the following troubleshooting tips:
- Power Source: Make sure the AC power adapter is plugged into a working power source.
- Connections: Check all connections between the device and the AC power adapter to ensure they are secure.
- Specifications Match: Verify that the voltage and current rating of your device matches the specifications of the AC power adapter.
- Test with Other Devices/Sources: Try using a different power source or device with the AC power adapter to see if the issue persists. This helps isolate whether the problem is with the adapter or the connected device/source.
- Excessive Noise/Heat: It is normal for power adapters to become warm and make a little noise during use. However, if the noise or heat is excessive, discontinue use and contact customer service.
Warnings and Safety
⚠ WARNING:
- Grounding: To ensure personal safety and reduce interference, make sure the indoor safety grounding wire is reliably connected to the earth.
- Indoor Use Only: This product is designed for indoor use only. Avoid exposure to external heat sources, direct prolonged sunlight, dust, corrosive chemicals, and moisture. Keep the adapter away from water or damp environments to avoid the risk of electrical hazard.
- Handling: Do not move the device or adapter while using the power adapter. Avoid pulling on the cords and cables. Always grip plugs firmly when unplugging from the power source and when disconnecting cables.
- Children and Pets: Keep children and pets away from the power adapter to prevent electric shock or other safety hazards. Unplug the adapter when not in use and store it in a dry and cool place.
- Disconnection Procedure: When disconnecting the power supply, first disconnect the AC outlet from the power adapter, and then disconnect the power adapter from your electronic devices.
- No Disassembly or Modification: Do not disassemble or modify the adapter. If the adapter appears damaged or malfunctions, stop using it immediately and contact customer service. Do not attempt to repair the adapter yourself.
- Compatibility: Always check the voltage and polarity of the adapter before use. Using an incompatible adapter may damage your device. Completely review power-tip compatibility before use; never force a power tip into an electronic device.
User Tips
- Verify Voltage: Always double-check that the output voltage of the driver (DC12V) matches the input voltage requirement of your LED lights or other devices to prevent damage.
- Power Matching: Ensure the total wattage of your connected LED lights does not exceed the maximum power output of the driver (e.g., 36W, 60W, 100W, or 150W).
- Sensor Compatibility: When using sensors, ensure they are compatible with the 3PIN or 4PIN centralized control interfaces on the driver.
Warranty and Support
This LED Cabinet Driver comes with a 2-year warranty from the date of purchase.
For any questions, concerns, or assistance with your product, please contact our customer service department. Do not attempt to repair the adapter yourself, as this may void the warranty and pose safety risks.