1. Introduction
The COXO Mini LED Cabinet Light Sensor Switch offers versatile lighting control solutions for various applications such as cabinets, closets, kitchens, and wardrobes. This manual provides detailed instructions for the different sensor types available: Touch Sensor, Hand Wave Sensor, PIR Motion Sensor, Partition Sensor, and Double Door Sensor. Each sensor type provides a unique method of control to enhance convenience and energy efficiency.
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
- This product is designed for DC 12-24V systems. Do not connect to higher voltage power sources.
- Installation should be performed by a qualified professional if you are unsure about electrical wiring.
- Keep the sensor away from water and high humidity environments.
- Do not attempt to modify or repair the sensor yourself. Contact support if issues arise.
3. Package Contents
The package includes one cabinet sensor. Please note that LED lights and LED drivers are NOT included and must be purchased separately.
- 1 x Cabinet Sensor (selected type)
- Screws (quantity varies by sensor type)
- Holders (quantity varies by sensor type)
4. Specifications
| Attribute | Value |
|---|---|
| Material | Plastic |
| Certification | CE, EMC, ROHS, UL |
| Working Voltage | DC 12-24V |
| Control Type | Centralized Control |
| Item Type | Dimmers |
| Origin | Mainland China |
| Warranty | 2 Years |
| Package Weight | 0.04 kg |
| Package Dimensions | 16cm x 14cm x 2cm |
5. Sensor Types Overview
This product line offers five distinct sensor types, each designed for specific applications and control methods:
- PIR Motion Sensor: Detects movement to turn lights on/off.
- Touch Sensor: Responds to direct touch for on/off and dimming.
- Hand Wave Sensor: Activated by hand gestures for on/off and dimming.
- Partition Sensor: Designed for hidden installation behind thin materials, offering touch-like control and dimming.
- Double Door Sensor: Turns lights on when doors open and off when closed, ideal for cabinets with two doors.
6. Installation and Wiring
All sensors operate on a centralized control system, requiring connection to an LED cabinet driver (not included). The sensors connect to the driver via a 3-PIN Centralized Control Connector.
6.1. General Installation Steps:
- Ensure all power is OFF before beginning installation.
- Mount the LED Cabinet Driver in a suitable location.
- Connect the AC power input (AC220V) to the LED Cabinet Driver.
- Connect your LED Cabinet Lights/LED Strips to the output terminals of the LED Cabinet Driver.
- Connect the chosen sensor to the 3-PIN Centralized Control Connector on the LED Cabinet Driver.
- Secure the sensor in its desired location using the provided screws and holders (if applicable).
- Restore power and test the sensor's functionality.
6.2. Specific Sensor Installation Details:
PIR Motion Sensor
- Sensor Size: D15*L20mm
- Hole Size: 12mm
- Drill a 12mm hole for flush mounting.
- Position the sensor to cover the desired detection area (1-3 meters, 60° sensing angle).
Touch Sensor
- Sensor Size: D15*L16mm
- Hole Size: 12mm
- Drill a 12mm hole for flush mounting in an easily accessible location.
Hand Wave Sensor
- Sensor Size: D12*L12mm
- Hole Size: 10mm
- Drill a 10mm hole for flush mounting.
- Install in a location where hand gestures can be easily performed (4-9cm detection distance).
Partition Sensor
- Sensor Size: L35*W35*H8mm
- Designed for hidden installation behind materials up to 25mm thick.
- Ensure the mounting surface is clean and dry before adhering the sensor.
Double Door Sensor
- Sensor Size: D12*L14mm
- Hole Size: 10mm
- Drill two 10mm holes for flush mounting, one on each side of the double door opening.
- Ensure sensors are aligned to detect door closure accurately.
7. Operation
The operation of your LED cabinet light will depend on the specific sensor type installed:
7.1. PIR Motion Sensor
- Light On: When motion is detected within 1-3 meters and a 60° angle.
- Light Off: Automatically turns off after 30 seconds of no detected motion.
7.2. Touch Sensor
- Short Touch: Toggles light ON/OFF.
- Long Touch: Initiates smooth dimming (brightness 10%-100%). Release to set desired brightness.
7.3. Hand Wave Sensor
- Swipe Hand: Toggles light ON/OFF (detection distance 4-9cm).
- Long Touch (or hold hand): Initiates smooth dimming. Release to set desired brightness.
7.4. Partition Sensor
- Short Touch (on the partition): Toggles light ON/OFF.
- Long Press (on the partition): Initiates smooth dimming (brightness 10%-100%). Release to set desired brightness.
7.5. Double Door Sensor
- Light On: When the cabinet doors are opened.
- Light Off: When the cabinet doors are closed.
7.6. Product Video Demonstration
Watch this video for a visual demonstration of the different sensor types and their functionalities:
8. Maintenance
- Keep the sensor clean and free from dust or obstructions to ensure optimal performance.
- Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Regularly check wiring connections to ensure they are secure.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the LED driver; Loose wiring; Faulty sensor/LED. | Check power supply; Verify all connections; Test with a known working sensor/LED. |
| Sensor is unresponsive. | Sensor obstructed; Incorrect installation; Sensor type mismatch with driver. | Clear obstructions; Re-check installation steps for your specific sensor type; Ensure compatibility with your LED driver. |
| PIR sensor light stays on or doesn't detect. | Constant motion in detection area; Sensor positioned incorrectly. | Ensure no continuous motion; Adjust sensor angle/position. |
| Light is dim even at max setting (PIR sensor). | Incompatible LED driver or LED strip. | Ensure LED driver and LED strip are compatible with the sensor's voltage and power output. |
10. User Tips
- Compatibility Check: Always verify that your LED driver has a 3-PIN centralized control port for compatibility with these sensors.
- Analog Input: If your LED driver does not have a 3-PIN control port, some users have successfully adapted the sensor to work with existing analog input controllers (e.g., Shelly RGBW controller). This may require advanced electrical knowledge.
- Pantry Door Use: The Double Door Sensor can be effectively used for single pantry doors by simply leaving one of the two sensor components facing a wall or unused.
- Optimal Brightness: If experiencing dim lighting with a PIR sensor, ensure your LED driver and LED strip are adequately powered and compatible with the sensor's specifications.
11. Warranty and Support
This product comes with a 2-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to the original product listing or packaging for specific contact information.
An official user manual in PDF format is available. You can typically find this document on the product page or by contacting customer support.