1. Introduction and Overview
Thank you for choosing our LED Recessed Downlight. This product is an embedded LED downlight/spotlight designed for accent lighting in various settings. It is suitable for both home and engineering applications, providing high-quality illumination with advanced features for visual comfort.
Key features include a high color rendering index (Ra98) to restore original colors, low blue light emission, and flicker-free operation to reduce visual fatigue and protect eye health. The lamp is constructed from durable aluminum for efficient heat dissipation and a smooth, delicate texture.

2. Specifications
Technical Parameters (Model ZD-GCTD)
| Parameter | Value |
|---|---|
| Product Name | Round Anti-Glare LED COB Recessed Downlight |
| Model Number | ZD-GCTD |
| Rated Power | 10W |
| Rated Voltage | AC 220V (or AC85-265V/50Hz depending on specific variant) |
| Luminous Flux | 249-2000 lm |
| Color Temperature | 4000K (Natural Light) |
| Beam Angle | 60° |
| Color Rendering Index (CRI) | Ra > 98 |
| Power Source | AC |
| Is Dimmable | No |
| Material | Aluminum |
| Certifications | CE, CCC |
| Origin | Mainland China |
Dimensions


Additional Features
- High Color Rendering (Ra98): Restores true visual colors, enhancing spatial quality and reducing visual fatigue.
- Low Blue Light: Exempt from damage level (IEC/TR62778, IEC/TR62471 certified) to protect eye health.
- Flicker-Free: Stroboscopic depth (FPF) ≤ 0.5% for comfortable lighting.
- Efficient Heat Dissipation: Die-casting aluminum radiator with high purity and fast thermal conductivity, 3 times more efficient than ordinary heat dissipation aluminum, ensuring durability.
- Integrated Design: Ceiling integration for a borderless visual effect.


3. Safety Regulations
WARNING: Before installation, the power must be cut off to prevent electric shock.
- Do not use a power source with a voltage exceeding the rated voltage range (refer to the product's technical parameters for details). Using outside the rated voltage range for a long time may damage the lighting fixture.
- Before installing the lighting fixture, the main power supply must be cut off to ensure safety.
- Do not install lighting fixtures in unstable locations.
- Lamps should not be installed on ordinary combustible surfaces or covered with thermal insulation materials.
- The LED light source of the lamp must be used with a corresponding power driver. It is not allowed to substitute or change the load connection method of the lamp (e.g., using multiple LED light sources in parallel or in series).
- If there are any abnormalities or external wires are damaged, quickly cut off the power and have it inspected and repaired by a qualified professional to avoid danger.
- The light source of this lamp is non-replaceable. When the light source reaches the end of its life, the entire lamp should be replaced.
4. Installation Instructions
WARNING: To prevent accidents that threaten personal safety, such as damage to lighting fixtures, falling, electric shock, and fire, please strictly follow the instructions for installation and use. Do not modify the lighting fixtures or replace parts without authorization.

- Cut off the power supply: Ensure the main power control switch is turned OFF before starting installation.
- Prepare the opening: Drill a hole of the corresponding size in the ceiling. For model ZD-GCTD, the cutout size is 75mm. Ensure there is at least 50mm clearance above the fixture and 95mm clearance from combustible materials. Connect the driver input terminal to the mains power supply.
- Install the lamp body:
- Lift the stainless steel spring clips (or springs) on both sides of the light fixture simultaneously to the appropriate position.
- Place the entire light fixture upward into the opening.
- Complete Connection: After the lamp body is securely in place, turn on the power switch to test the light fixture.
Note: If the light does not turn on after connecting to the power supply, please confirm whether the lighting fixture is installed and wired correctly. The light source of this luminaire is non-replaceable; when the light source reaches the end of its lifespan, the entire luminaire should be replaced!
5. Operating Instructions
This LED downlight is designed for straightforward operation. Once properly installed and connected to the power supply, it will illuminate when the main power switch is turned ON. It is not dimmable, so it will operate at its full brightness.
6. Maintenance and Upkeep
Before maintaining and repairing lighting fixtures, the power must be cut off to prevent electric shock.
- For safe and efficient use, clean and inspect the product regularly (recommended once every six months).
- When cleaning, cut off the power supply. Use a soft cloth dampened with soapy water and wrung out thoroughly to wipe the lamp. Follow with a dry cloth.
- Do not use other reagents for cleaning, as this may cause the lamps to discolor or become damaged.
7. Troubleshooting
- Light does not turn on: Check if the power supply is connected correctly and if the main power switch is ON. Verify that the lamp is properly installed and wired according to the instructions.
- Flickering or abnormal light: Ensure the voltage supply is within the rated range. If external wires are damaged, immediately cut off power and seek professional repair.
- Lamp discolors or gets damaged during cleaning: Ensure only a soft cloth dampened with soapy water is used, and avoid harsh chemical reagents.
8. User Tips
- Users have found this downlight easy to install, making it a convenient choice for various applications.
- The light quality is generally praised, with many noting the absence of flicker, contributing to a comfortable environment.
- The 10W model provides ample brightness for smaller rooms or as accent lighting in larger spaces.
9. Warranty and Support
This product comes with a 2-year warranty. For any issues or further assistance, please refer to the official product guides and documents available in PDF format. You can access the user manual PDF for more detailed information.
Applicable standards: GB7000.1, GB7000.202
Product inspection passed. Inspection date: see the product body.