Nekteck FE-7208

Contents

Nekteck Air Compression Leg Massager

Model: FE-7208 User Manual

Nekteck Air Compression Leg Massager with controller

The Nekteck Air Compression Leg Massager with its remote control.

Introduction

Thank you for purchasing the Nekteck Air Compression Leg Massager. Nekteck is committed to providing high-quality products and excellent customer service. This manual contains instructions for all the functions and features of your Air Compression Leg Massager. Please read it carefully before use.

The air compression leg massager is designed for the temporary relief of minor muscle aches and pains, and to temporarily increase circulation in the treated foot, calf, and thigh for individuals in good health. It simulates the kneading and stroking of tissues using air-inflatable boots.

Important Safety Precautions

Precautions to Ensure Safe and Reliable Operation:

  • Do not insert any foreign objects into the openings.
  • Do not attempt to disassemble the unit.
  • Do not crumple or crush the massager by any means.
  • Do not place the unit in direct sunlight nor store in dusty places or with high humidity.
  • To avoid any possibility of accidental strangulation, keep this unit away from children and do not drape tubing around your neck.
  • Ensure that children do not play with the unit unsupervised; some parts may be swallowed.
  • Do not use the device near strong electrical or electromagnetic fields generated by cell phones or other devices, as they may cause interference or become an interference source to the device.
  • Any modification to the unit shall not be allowed.
  • The product (air compression leg massager) is for adult use only.

Contraindications:

This air compression leg massager is not intended for use if you have any of the following medical conditions. Consult with a physician to confirm if the product is clinically safe for you to use:

  • Presumptive evidence of congestive heart failure where an increase in blood returned to the heart could be detrimental.
  • Pre-existing deep vein thrombosis (DVT) or blood clots.
  • Existing hemorrhagic disease or coagulation problems.
  • Thrombophlebitis.
  • Pulmonary embolism.

This product should not be utilized by individuals with edema, ischemic vascular disease, or severe peripheral neuropathy.

Safety Precaution:

  • Do not plug the unit into a power source that's beyond its voltage requirement.
  • Do not attempt to repair or dismantle the product by yourself or a third party. This will void the warranty.
  • Stop using the product immediately if you feel uncomfortable or any abnormalities occur.
  • Do not use this product in a high-temperature environment.
  • Do not place the unit in a place where it may be in contact with flammable items, explosive items, or chemicals.
  • Do not touch the unit with any sharp object or risk damage.
  • Do not use this product if any of the below apply to you: -Skin is infected, swollen, burnt or otherwise damaged. The product should be used on healthy skin.
  • Do not use the product in a damp place or where it may get wet. If the unit is wet, do not use it.

Do Not Use the Product When You Have the Following Medical Conditions:

  • You have a pacemaker or any other medical implant.
  • You are suffering from heart disease.
  • You are suffering from diabetes.
  • Your bones are fragile or injured.
  • You are suffering from cancer.
  • You are receiving treatment or your blood pressure is not normal.
  • You are suffering from osteoporosis.
  • You are currently pregnant or having menstruation.
  • Children or adolescents who are developing physically.

The air pressure hose connected to each boot cannot be pulled out. Please do not try to remove these from the boot.

Getting to Know Your Air Compression Leg Massager

Product Diagram

Product diagram of the Nekteck Air Compression Leg Massager with labeled components.

Diagram showing the main components of the Nekteck Air Compression Leg Massager.

  1. Air Compression Boots (Left/Right)
  2. Velcro Strap
  3. Remote Control
  4. Air Pressure Hoses (Left/Right)
  5. LCD Screen
  6. Control Panel
  7. Port for Air Pressure Hose Connector
  8. Adapter

Package Contents

  • Air Compression Leg Massager X1
  • Adapter X1
  • User Manual X1
  • Controller X1
  • Portable Bag X1
  • Warranty Card X1

Control Panel Overview

Detailed view of the Nekteck Air Compression Leg Massager remote control with button labels.

The remote control allows you to select various massage modes, intensity, heat, and vibration settings.

Button Function
Power Button Press for 2 seconds to turn on/off the device. Default setting: Auto mode/mid intensities/high heat/vibration working.
Mode Button Press to switch between massage modes: AUTO, LEG, FOOT, PINCH, PRESS, RELAX.
Intensity Button Adjust air pressure intensity: MIN/MID/MAX.
Heat Button Adjust heat level: LOW/HIGH/OFF.
Vibrate Button Refer to vibration working. Blue light: model 1 vibration. Green light: model 2 vibration. Orange light: model 3 vibration.

Remark: This product has a status memory function: the device will remember the current working mode status (air pressure, heating, vibration mode and gear) after starting the machine. It will become the default setting when restarting the machine the next time.

Specifications

Feature Specification
Model No. FE-7208
Rated Power 24W
DC output 12V 2A
Weight 3.96 Lbs
Automatic shut-off 20mins
Unit size (LxWxH) 14.17 x 7.09 x 9.05 inch
AC Adapter 100-240VAC, 50/60Hz 0.7A
Operating Environment Temperature: +41°F to 104°F (5°C ~ 40°C)
Atmospheric pressure 70kPa-106kPa
Humidity: 15% to 90%RH
Storage Environment Temperature: -13°F to 158°F (-25°C ~ 70°C)
Atmospheric pressure 70kPa-106kPa
Humidity ≤ 93% RH

Note: When using the device, ensure you are comfortably sitting or lying down to avoid the risk of falling. This is the best way to enjoy the massage.

Before First Use (Setup)

  1. Remove the Air Compression Leg Massager and its accessories from the packaging box. Double-check that all items and accessories are complete.
  2. Check that the fabric is in good condition.
  3. Sit in your most comfortable posture, place your feet and legs into the massager and press the control to start the Air Compression massage. Adjust the levels to the most comfortable one.
  4. Make sure to check that the unit is working properly after powering on, then select the massage mode and intensity that you prefer. Do this especially if the product has not been used for a long time.
  5. There may be signs of use from the boot on the skin. If you are worried about marks from use, wear stockings or pants before utilizing the massager. Note that the device may leave marks of use on the feet, calves, knees and thighs, which may not immediately fade.

Note:

  • Do not use it on clothes and trousers with zippers or metal objects. It may damage the product.
  • It is easier to install if you sit on a chair.
  • When installing, be careful not to let velcro stick to clothes or stockings, especially sweaters, to avoid damage.
  • After ensuring you have donned the boots and the velcro straps are secured, turn on the device and enjoy the massage.

Operating Instructions

Operating Principle

The Air Compression Leg Massager consists of an air pump, two solenoid valves, and air compression boots working together as one unit. The air pump is connected to the air compression boots via air hoses; each boot has 3 compression chambers. By inflating and deflating the air chambers through the control of working and/or idle of the air pump and solenoid valves at a regular pace and different timing, it simulates the kneading, stroking of the foot, calf, and thigh. Software controls the timing and the working and/or idle of the air pump and solenoid valves, cycling airflow into and out of the boots to compress the body.

How to Connect the Controller with Air Hose

Diagram showing how to connect the air hoses to the controller.

Image illustrating the connection of air hoses to the controller.

Insert the symbols "R" and "L" on the hose into the corresponding "L" and "L" holes in the controller respectively. Make sure that the written symbols on the hose are facing outside so that the "L" is facing up, and the "R" is facing down. Air pressure cannot be produced if the device is not in this configuration.

Wearing Order

Diagram showing the correct wearing order for the leg massager boots.

Visual guide for properly wearing the leg massager boots, securing velcro straps from foot to thigh.

  1. Put your foot into the massager, starting from the foot. Fix the foot first, then stick the velcro to the calf-thigh-knee in sequence. There are two velcros on the calf.
  2. There are 2 velcros on the thigh, which can be adjusted according to the individual's leg circumference.
  3. It is easier to attach the knee velcro strap after adjusting the velcro straps on the foot, calf, and thigh.

Video demonstrating the setup and use of the Nekteck Air Compression Leg Massager.

Care & Maintenance

Security and Maintenance

  • Never use thinner, benzene, or alcohol (which may cause malfunction, parts broken or discoloration, etc.) to clean.
  • Avoid dropping, slamming, or throwing the massager.
  • Do not expose the unit directly under sunlight.

Cleaning

If you are worried about dust, use a neutral detergent suitable for kitchen use, diluted to 5% with warm or clean water. Damp a soft cloth with this solution to clean the unit.

Make sure to turn off the power and unplug the hose before cleaning. Wipe the inside and outside of the leg massager and remember not to wipe with large force.

Diagram showing how to clean the leg massager boots.

Illustration of cleaning the leg massager boots.

Note:

  • If rubbish or hair is caught in the velcro, remove it with a toothpick, etc.
  • Do not insert foreign objects into the outlet of the hose plug.
  • A pair of boots is recommended for exclusive use by one person only.

Storage

Diagram showing the recommended storage method for the leg massager.

Visual guide for folding and securing the leg massager for storage.

To store the unit:

  1. Stick the velcro on the feet, ankles, and calves to the corresponding positions (1, 2, 3).
  2. Fold the foot part inward (4).
  3. Fold the ankle and calf (5), round the connecting hose, and then fix it with a belt fastener (6, 7).

Safekeeping

  • Put the unit in a cool, dry place and avoid direct sunlight or high-temperature places.
  • Keep out of the reach of children.
  • Do not store other objects on the surface of the controller or massager to avoid damaging the device's surface and to avoid discoloration of the product.

Troubleshooting

Before requesting repairs, please confirm the following contents. If errors persist after inspection, contact customer support.

Condition Troubleshooting
The unit does not turn on. Check if the AC adapter is connected.
Stop working halfway. 1. Check if it is out of power.
2. Check whether the hose plug is loose or the connecting hose is broken.
Air does not enter. Check whether the connecting hose is broken.
Strength intensity is too weak. 1. Check if the cables or accessories are loose. Make sure to tightly wind the velcro properly.
2. If you are wearing thick stockings or pants, this may weaken the strength intensity of the massager.
Strength intensity is too strong. 1. Make sure that the attachments are not too tight.
2. Try to adjust the velcro to the most comfortable setup.
Air does not de-compress. Remove the accessory and pull out the hose plug to re-install. If a lot of air remains in the airbag, it may take some time to exhaust. Unplug the hose and wait for a while for the air to escape naturally.
Weird sounds during operation. The crisp sound of velcro slightly opening (when air enters the airbag) and a buzzing sound (produced by the mode effect) are normal and caused by the product design.

User Tips

  • This massager can provide great relief for leg pain and is highly recommended for individuals experiencing such issues.
  • The massager will automatically shut down after 20 minutes of continuous use. It is recommended not to use the massager for more than 40 minutes in a day to avoid over-stimulating muscles and nerves.
  • The massager is designed for feet, calves, knees, and thighs only. Using it on other body parts may cause injury.
  • The elasticity of the velcro wrap can be adjusted to control the massage strength and pressure. Looser wraps result in weaker intensity, while tighter wraps increase it.
  • If the air in the massager hose does not exhaust immediately, unplug the hose and wait for a while for the air to escape naturally.
  • For optimal comfort and safety, always use the device while comfortably sitting or lying down.
  • Avoid wearing clothes with zippers or metal objects when using the massager to prevent damage to the product.
  • For hygiene, it is recommended that each pair of boots be used exclusively by one person.
  • The expected service life of the product is approximately two years with 2 uses per day.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

Warranty Information

Terms & Policy

Nekteck Corporation ("Nekteck") warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 1 year from the date of original purchase. Nekteck agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.

There is no other express warranty. This warranty does not apply if:

  • The product has been modified from its original condition;
  • The product has not been used in accordance with directions and instructions in the user manual;
  • To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
  • To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Nekteck;
  • To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
  • To damages or defects exceeding the cost of the product.

Nekteck will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty.

This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.

This warranty does not extend to products purchased from unauthorized sellers. Nekteck's warranty extends only to products purchased from authorized sellers that are subject to Nekteck's quality controls and have agreed to follow its quality controls.

All implied warranties are limited to the period of this limited warranty.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

If you discover that your product is defective within the specified warranty period, contact Customer Support via support@nekteck.com. DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, return the product with a copy of the invoice and order ID.

Every Nekteck product automatically includes a 1-year warranty. To make the customer support process quick and easy, register your product online at www.nekteck.com.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking shown on the product indicates that it should not be disposed of with other household waste at the end of its life.

To prevent potential harm to the environment or to human health, separate this product from other types of wastes and recycle it responsibly.

When disposing of this type of product, contact the retailer where the product was purchased or contact your local government office for details regarding how this item can be disposed of in an environmentally safe recycling center.

Business users should contact their supplier and check the terms and conditions of the purchasing agreement. This product should not be mixed with other commercial wastes for disposal. This product is free of hazardous materials.

Customer Service

Feel free to contact our friendly Customer Support Team if you have any questions or concerns regarding your new product. Your satisfaction is our priority.

Email: support@nekteck.com

We will reply to your message within 24 hours!

Please include your Order ID in your email when you are contacting Customer Support for faster solutions.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.