1. Introduction
The LEEDOAR PR1000 Hunting Trail Camera is designed for wildlife monitoring, scouting, and property surveillance. It features high-resolution imaging, advanced night vision, and a durable, waterproof design suitable for various outdoor environments. This manual provides detailed instructions for setting up, operating, and maintaining your trail camera.

Figure 1: LEEDOAR PR1000 Trail Camera - Key Features
2. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- 1 x LEEDOAR PR1000 Trail Camera
- 1 x User Manual
- 1 x Mounting Strap
- 1 x Data Cable (USB)

Figure 2: Package Contents
Video 1: Product Overview, Appearance, Power On, and Waterproof Test
3. Product Analysis
Familiarize yourself with the components and controls of your trail camera.
3.1 Front View Components

Figure 3: Front View Components
- Working Indicator Light: Indicates camera status.
- Infrared Lights: Provide illumination for night vision.
- LENS: Captures images and videos.
- PIR Sensor: Passive Infrared Sensors detect motion and heat.
3.2 Internal Controls and Display

Figure 4: Internal Controls and Display
- 2.0" Display Screen: For viewing settings, photos, and videos.
- Lock Hole: For securing the camera.
- Menu Button: Accesses camera settings.
- OK Button: Confirms selections.
- Replay Button: Plays back captured media.
- Mode Button: Switches between Photo, Video, and Photo+Video modes.
- Shot Button: Manually captures a photo or starts/stops video recording.
- Up/Down/Left/Right Buttons: Navigation within menus.
- TF Card Slot: Insert Micro SD card (up to 128GB).
- USB Port: For connecting to a computer or external power.
- Power Switch: Turns the camera On/Off.
- Battery Box: Holds 8 x AA batteries.
4. Setup
4.1 Battery Installation
- Open the camera's casing.
- Locate the battery compartment.
- Insert 8 x AA batteries, ensuring correct polarity. (Batteries are not included).
- Close the battery compartment securely.
4.2 TF Card Installation
- With the camera powered off, open the casing.
- Locate the TF card slot.
- Insert a Micro SD card (up to 128GB) into the slot until it clicks into place.
- To remove, push the card in again until it springs out.
4.3 Mounting the Camera
The camera can be mounted using the provided strap or a standard tripod mount.
- Attach the mounting strap through the designated loops on the camera's back.
- Secure the camera to a tree or pole at the desired height and angle.
- Ensure the camera is stable and has a clear view of the area you wish to monitor.

Figure 5: Camera Mounted on a Tree
5. Operating Instructions
5.1 Powering On/Off
To power on the camera, slide the Power Switch to the 'ON' position. To power off, slide it to 'OFF'.
5.2 Mode Selection
Press the 'MODE' button to switch between the following modes:
- Photo Mode: Captures still images.
- Video Mode: Records video clips.
- Photo+Video Mode: Captures both a photo and a video clip when triggered.
5.3 Menu Settings
Press the 'MENU' button to access the camera settings. Use the navigation buttons (Up/Down/Left/Right) to scroll through options and 'OK' to confirm. Key settings include:
- Resolution: Select image resolution (58MP, 48MP, 32MP, 24MP, 20MP) and video resolution (2.7K, 1080P, 720P).
- Trigger Speed: Set the boot-to-capture time (0.2-0.6S).
- PIR Sensitivity: Adjust the sensitivity of the motion sensors.
- Time Interval: Define the delay between consecutive captures.
- Date/Time Mark: Enable or disable date and time stamps on media.
- Password Lock: Set a password for camera access.
- Formatting: Format the TF card (this will erase all data).
- Timer Function: Set specific times for the camera to be active.
5.4 Capturing Media
In the desired mode, the camera will automatically capture media when motion is detected within the 120° detection range and up to 20m distance. You can also manually capture a photo or start/stop video recording by pressing the 'SHOT' button.

Figure 6: Trigger Speed and Detection Range
5.5 Night Vision
The camera automatically switches between day and night modes. At night, the 940nm Low Glow IP LED Flash provides invisible infrared illumination for clear black and white images and videos without disturbing wildlife.

Figure 7: Advanced Night Vision Function

Figure 8: 120° Wide Angle PIR Detection
6. Maintenance
6.1 Cleaning
Wipe the camera's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the lens and PIR sensors are clean for optimal performance.
6.2 Battery Replacement
Replace all 8 AA batteries when the low battery indicator appears on the screen or if the camera fails to power on. Always use fresh batteries of the same type.
6.3 TF Card Management
Regularly format your TF card through the camera's menu to ensure optimal performance and prevent data corruption. Back up important files before formatting.
6.4 Waterproofing
The camera is rated IP66 waterproof, making it resistant to rain and dust. Ensure the casing is securely closed and latched to maintain its waterproof integrity.
7. Troubleshooting
If you encounter issues with your camera, refer to the following common problems and solutions:
- Camera not powering on: Check battery installation and ensure batteries are fresh. Verify the power switch is in the 'ON' position.
- Poor image/video quality: Ensure the lens is clean. Check the selected resolution settings in the menu.
- No motion detection: Verify PIR sensitivity settings. Ensure no obstructions are blocking the PIR sensors. Check the detection range and angle.
- TF card error: Ensure the TF card is inserted correctly. Try formatting the card (this will erase all data). If the issue persists, try a different TF card.
- Night vision not working: Ensure the camera is in an environment dark enough to trigger night mode. Check if the IR LEDs are obstructed.
8. Specifications

Figure 9: Product Parameters
| Feature | Specification |
|---|---|
| Brand Name | LEEDOAR |
| Model Number | PR1000 |
| Image Resolution | 58MP / 48MP / 32MP / 24MP / 20MP |
| Video Resolution | 2.7K / 1080P / 720P |
| File Format | JPG / MP4 |
| Internal Storage | 64G (referring to max TF card capacity) |
| TF Card Support | Up to 128GB |
| PIR Sensor Angle | 120° (3 pieces PIR sensor) |
| PIR Detection Range | Up to 20m / 65ft |
| Trigger Speed | 0.2 - 0.6 seconds |
| Display Screen | 2.0" TFT |
| IR LED | 34 PES (940nm Low Glow) |
| Waterproof Rating | IP66 |
| Operating Temperature | -20°C to 60°C |
| Power Source | 8 x AA Batteries or DC 6V-1A (USB) |
| Stand-by Time | Up to 8 months |
| Weight | 300g |
| Dimensions (Single Package) | 145 x 110 x 90mm |
| Connectivity | USB |
| Sensor Type | CCD |
| Sensor Size | 1/2.8'' |
| Focal Length | 2.8mm |
| Certification | CE, FCC, RoHS, UL |
9. User Tips
- Optimal Placement: For best motion detection, position the camera to avoid direct sunlight or heat sources that might cause false triggers. Aim for a clear line of sight to the target area.
- Battery Life: Use high-quality alkaline or rechargeable AA batteries for extended operation, especially in cold weather.
- TF Card Capacity: While the camera supports up to 128GB, consider using a smaller card if you plan to check footage frequently, as it can be faster to review.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.