1. Introduction
The ONWA KP-27 is a 7-inch Marine GPS Chart Plotter designed for recreational boating and light commercial marine applications. It provides reliable visual navigation information, supporting multiple GNSS systems including GPS, Beidou, Galileo, and Glonass. This manual provides detailed instructions for the installation, operation, and maintenance of your KP-27 series device.
The KP-27 series offers various models (KP-27, KP-27A, KP-27F, KP-27X) with optional features such as built-in AIS transponders and fish finders to suit diverse marine needs.
About Matsutec Marine
Matsutec is a brand in high-performance marine electronics, known for ease-of-use, rugged design, and reliability. With over 15 years of legacy in marine navigation technology, Matsutec products are engineered to deliver best-in-class sensors and intelligent navigation systems, making time on the water safer and more enjoyable. Matsutec's major products include GNSS navigators, chart plotters, class B AIS, class A AIS, MFDs, fish finders, digital echo sounders, ECS, ECDIS, GNSS compasses, radar systems, and marine LCD monitors.
What's in the Box
The standard package for your ONWA KP-27 series GPS Chart Plotter typically includes:
- Main Display Unit (KP-27)
- Mounting Bracket
- Power/Data Cable
- GPS Patch Antenna (with 4m cable, SMA connector, IP66)
- Quick Manual
- Standard Accessories Pack (screws, nuts, etc.)
- Protective Cover
2. Safety Information
Please read all safety information and instructions carefully before installing and operating the device. Failure to follow these instructions could result in injury or damage to the device or vessel.
- Installation: Ensure the device is installed in a secure location, away from direct sunlight and excessive heat. All wiring should be done by a qualified technician to prevent electrical hazards.
- Power Supply: Connect the device to a stable 10.5 to 35VDC power source. Incorrect voltage can damage the unit.
- Navigation: This device is an aid to navigation. Always use official government charts and publications for safe navigation.
- Water Resistance: The unit is rated IP66 for ingress protection, meaning it is protected against powerful water jets. However, avoid submerging the unit.
3. Device Components and Controls
Front Panel
The front panel features the 7-inch LCD display and an array of control buttons for easy operation.
Key controls typically include:
- MENU Button: Accesses the main menu and settings.
- MODE Button: Cycles through different display modes.
- Directional Pad: Navigates menus and moves the cursor on the chart.
- ENTER/OK Button: Confirms selections.
- X Button: Cancels operations or exits menus.
- C/O Button: Chart/Other toggle.
- Power/Brightness Button: Turns the unit on/off and adjusts screen brightness.
- Function Buttons (fx): Programmable or dedicated function keys.
Rear Panel and Connections
The rear panel houses all necessary input/output ports for power, data, and external sensors.
Ports include:
- PWR/DATA: Power input and NMEA0183 data connection.
- AIS: AIS antenna connection (for models with AIS).
- GPS: GPS antenna connection.
- NMEA2000: NMEA2000 network connection.
- SD/CCS: SD card slot and other control connections.
4. Installation and Setup
Mounting the Unit
The KP-27 series comes with a mounting bracket for secure installation on your vessel's dashboard or overhead console. Ensure the mounting location is stable, provides good visibility, and is protected from extreme weather conditions.
Interconnection Diagram
Refer to the diagram below for proper wiring and connection of external devices. The unit requires a power input of 10.5 to 35VDC.
- Power: Connect the power cable to a 10.5 to 35VDC power source.
- GPS Antenna: Connect the supplied GPS Patch Antenna to the GPS port. For optimal performance, ensure the antenna has a clear view of the sky. An optional external GPS antenna (KA-07) can be used.
- AIS Antenna: For KP-27A and KP-27X models, connect a VHF antenna to the AIS port.
- Fishfinder Transducer: For KP-27F and KP-27X models, connect a compatible fishfinder transducer.
- NMEA2000 Network: Connect to an N2K network (optional) for data sharing with other compatible devices.
- NMEA0183: Use the PWR/DATA cable for NMEA0183 input/output. Supported baud rates include 4800, 9600, 19200, and 38400.
- Heading Sensor: An optional Heading Sensor E-Compass (KA-GC9A) can be connected via RS422.
5. Operation
Basic Navigation and Chart Plotting
The KP-27 supports K-Chart, C-Map MAX, and Navionics+ mapping systems. Use the directional pad to move the cursor and zoom in/out on the chart. Create waypoints and routes for navigation.
Display Modes
The KP-27 offers various display modes to suit your needs, including Plotter, Compass, Highway, Sounder, Sounder+Plotter, AIS, Wind, and Satellite views. These modes are available in both day and night settings for optimal visibility.
You can select display modes depending on your needs, including 50 KHz, 200 KHz, Dual, 50 KHz/Zoom, and 200 KHz/Zoom for sonar displays. The display supports 16 colors according to intensity, allowing for better discrimination of echoes.
AIS Features (KP-27A, KP-27X)
Models with built-in AIS (KP-27A, KP-27X) utilize Class B+ AIS Technology with SOTDMA (Self-Organizing Time Division Multiple Access) and 5W transmission power for increased range and satellite reception. A VHF antenna is required for AIS functionality.
The unit provides CPA (Closest Point of Approach) and TCPA (Time to Closest Point of Approach) alarms to alert you of nearby vessels. A Vessel List displays details of nearby ships.
AIS targets can be overlaid directly on the plotter screen, showing MMSI numbers, locations, and ship details. You can also manually save up to 10 AIS targets/records and save recorded tracks as routes for later review.
Built-in HD Fish Finder (KP-27F, KP-27X)
Models with a built-in fish finder (KP-27F, KP-27X) apply advanced digital fish finder technology with dual frequencies (50 and 200KHz, alternately transmitted). A transducer is required for operation.
Features include automatic range and gain adjustment, excellent sea-bed discrimination, and easy identification of fish and schools of fish. The display shows exact depth for ease of fishing.
Alarms
The KP-27 series supports various alarms to enhance safety and awareness:
- Fish Alarm: Alerts when fish are detected at a set range.
- Bottom Alarm: Alerts when the set bottom range is reached.
- Temperature Alarm: Warns when water temperature reaches a set range (requires temperature sensor).
- CPA/TCPA Alarm: Alerts about potential collision risks with other vessels.
6. Maintenance
- Cleaning: Clean the display and unit exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Software Updates: The system supports SD card updates. Periodically check the manufacturer's website for firmware updates to ensure optimal performance and access to new features.
- Connections: Regularly inspect all cable connections for corrosion or damage. Ensure they are securely fastened.
- Storage: When not in use for extended periods, store the unit in a dry, cool place, ideally with the protective cover installed.
7. Troubleshooting
If you encounter issues with your ONWA KP-27, try the following basic troubleshooting steps:
- No Power: Check all power connections, fuses, and the vessel's battery voltage. Ensure the power cable is securely plugged into the unit.
- No GPS Signal: Ensure the GPS antenna has a clear view of the sky, free from obstructions. Check the antenna cable connection.
- No AIS Data: For AIS models, ensure the VHF antenna is properly connected and has a clear line of sight. Check AIS settings in the menu.
- No Fish Finder Display: For fish finder models, ensure the transducer is correctly installed and connected. Check transducer settings and frequency.
- Screen Freezes/Unresponsive: Try restarting the unit by holding the power button. If the issue persists, perform a factory reset (refer to the quick manual for instructions, as this will erase user data).
- Incorrect Chart Display: Verify that the correct chart card is inserted and properly recognized. Check chart settings and zoom levels.
For persistent issues, contact Matsutec Marine International Store support.
8. Specifications
Below are the detailed specifications for the ONWA KP-27 series. Note that some features may vary by model (KP-27, KP-27A, KP-27F, KP-27X).
Key Specifications Summary:
| Feature | Specification |
|---|---|
| Display Size | 7-inch Color TFT dayview LCD |
| Resolution | 800x480 pixels |
| LCD Brightness | 1000 nit (Sunlight Viewable) |
| GNSS | GPS, Beidou, Galileo, Glonass (50 parallel channels) |
| Accuracy | Position: 3 meters (95%) without S/A |
| NMEA Interface | NMEA0183, NMEA2000 |
| Waterproofing | IP66 |
| Power Supply | 10.5 to 35VDC, current drain <1.0A at 12V |
| Operating Temperature | -15°C to +55°C (Display unit), -25°C to +70°C (Antenna unit) |
| Dimensions (KP-27) | 155.1(H)mm x 241.3(W)mm x 62.9(D)mm |
| Weight (KP-27) | 1.0KG |
Model Comparison (KP-27 Series):
The KP-27 series includes models with varying features:
- KP-27: Standard 7" GPS Chart Plotter.
- KP-27A: 7" GPS Chart Plotter with Class B+ AIS Transponder.
- KP-27F: 7" GPS Chart Plotter with Built-in Fish Finder.
- KP-27X: 7" GPS Chart Plotter with Built-in Fish Finder and Class B+ AIS Transponder.
9. User Tips
- Optimize Visibility: Utilize the 1000 nit sunlight viewable display and adjust brightness settings for optimal viewing in various lighting conditions, including day and night modes.
- Chart Management: Keep your chart data updated using the SD card slot to ensure you have the latest navigation information.
- Alarm Customization: Configure CPA/TCPA, fish, bottom, and temperature alarms to suit your specific navigation and fishing preferences for enhanced safety and efficiency.
- Data Integration: Leverage NMEA0183 and NMEA2000 connectivity to integrate your chart plotter with other marine electronics on your vessel for a comprehensive navigation system.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Matsutec Marine International Store directly. Refer to your purchase documentation for specific warranty terms and conditions.
Manufacturer: Matsutec Marine International Store
Contact Information:
- Website: www.matsutec.cn
- AliExpress Store: matsutec.aliexpress.com/store/600627
Please have your product model (KP-27) and serial number ready when contacting support.