1. Introduction
The WS2812B RGBIC LED String Light is a versatile and vibrant lighting solution designed for various decorative purposes. Featuring individually addressable RGBIC LEDs, Bluetooth app control, and music synchronization, these fairy lights offer a dynamic and customizable lighting experience. This manual provides essential information for the safe and effective use of your LED string lights.
RGB vs. RGBIC Explained
RGB: Traditional RGB LEDs can only display one color at a time across the entire strip. For example, if you select red, the entire string will illuminate red.
RGBIC: RGBIC (RGB Individual Control) LEDs feature an integrated circuit (IC) chip that allows for individual or segmented control of colors. This means different sections of the light string can display different colors simultaneously, creating dynamic 'dream color' effects, chasing patterns, and multiple lighting modes.
2. Package Contents
- WS2812B RGBIC LED String Light (5m/10m/20m variants)
- USB Controller
- IR Remote Controller (with CR1220 battery included)
3. Setup Instructions
Before first use, please ensure all components are present and undamaged.
- Power Connection: Connect the LED string light to the USB controller. Ensure the USB controller is then connected to a stable DC5V power supply. Important: Only use a DC5V power supply. Using a higher voltage will damage the lights.
- Remote Control Preparation: The IR Remote Controller comes with a plastic insulating tab. Pull this tab out before first use to activate the battery. Re-insert the tab after use to conserve battery life.
- App Download: Scan the QR code provided in the user instruction diagram below to download the control application to your smartphone.
- App Connection:
- Start the downloaded application on your smartphone.
- Ensure Bluetooth is enabled on your phone.
- The app will automatically search for and connect to the LED controller within approximately 5 seconds.
- Once connected, you can begin to enjoy the Bluetooth wireless control experience.

Figure 3.1: User Instruction Diagram (Scan QR code for app download)
4. Operating Instructions
4.1. App Control
The mobile application provides comprehensive control over your LED string lights. Refer to the 'Guide' section within the app for detailed operating instructions.
- Color Selection: Use the color wheel to select desired colors. You can also click the square icon for fine-tuning or choose from classic color presets.
- Brightness Adjustment: Adjust the brightness from 1% to 100%.
- Mode Switching: Navigate through various lighting modes and effects.
- Music Synchronization: The lights can change patterns and colors in rhythm with music played through your device.
- Individual Bulb Control: Select specific colors for individual bulbs or segments of the string.
- Multiple Scene Presets: Access pre-programmed scenes, each offering 10 distinct lighting modes to suit different occasions.
- Group Control: If you have multiple light strings, the app supports linking and controlling them simultaneously.

Figure 4.1: App supporting multiple light string links

Figure 4.2: Music rhythm mode in action

Figure 4.3: Individual bulb control via app

Figure 4.4: Multiple scene presets

Figure 4.5: Brightness dimming levels
4.2. IR Remote Control
The included 24-key IR remote controller offers quick access to common functions:
| Zone/Symbol | Key Function |
|---|---|
| Index Adjustment | Adjust the length of the light. After setting, press to confirm. |
| Switch Button | Turn On/Off |
| Color Zone | Adjust color (e.g., Red, Green, Blue, White, etc.) |
| Dynamic Function | Rhythm mode switching, Cycle theme colors, Seven-color switching, White light switching, Lower the curtain, Reserve running forward/backward, Mode setting, Forward background color running, Reserve light running, Reserve colorful, Brightness adjustment, Seven-color jump, Seven-color fade, Automatic cycle. |
5. Maintenance
- Cleaning: Gently wipe the LED string lights with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the lights in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Replacement: If the IR remote control stops responding, replace the CR1220 button cell battery. Ensure correct polarity when inserting the new battery.
- Water Resistance: The lights are IP65 waterproof, meaning they are protected against dust and low-pressure water jets. However, avoid submerging them in water or exposing them to heavy rain for extended periods.
6. Troubleshooting
- Lights Not Turning On:
- Check if the DC5V power supply is correctly connected and functioning.
- Ensure all connections between the light string and the USB controller are secure.
- Verify the power button on the remote or app is pressed.
- App Not Connecting to Lights:
- Ensure Bluetooth is enabled on your smartphone.
- Restart the app and try connecting again.
- Unplug and replug the USB controller to reset it.
- Ensure your phone is within the 20m Bluetooth range.
- IR Remote Not Working:
- Check if the plastic insulating tab has been removed from the battery compartment.
- Replace the CR1220 battery if it's depleted.
- Ensure there is a clear line of sight between the remote and the USB controller.
- Inconsistent Colors or Flickering:
- Check all physical connections for looseness.
- Ensure the power supply is stable and sufficient.
- Try resetting the controller by unplugging and replugging it.
7. Specifications
| Feature | Specification |
|---|---|
| Type | USB Dreamcolor Bluetooth LED String Light |
| Working Voltage | DC5V |
| Emitted Color | WS2812B RGBIC |
| Length Options | 5M (16.4FT), 10M (32.8FT), 20M (65.6FT) |
| LED Quantity | 50LEDs/5M; 100LEDs/10M; 200LEDs/20M |
| Waterproof Rating | IP65 |
| Lifespan | More than 50,000 hours |
| Control Methods | Bluetooth App, IR Remote Controller |
| Working Temperature | -20°C to 50°C (-4°F to 122°F) |
| Body Material | Plastic |
| Light Source | LED bulbs |
| Dimmable | Yes |
| Batteries Included | Yes (for remote) |
| Battery Type | Button Cell (CR2025 for remote) |
| Luminous Flux | 60-249 Lumens |
| Lighting Distance | 6-10m |
| Music Sync | Yes |
| Power Source | DC |
| Certifications | RoHS, EMC, CE |
| Bluetooth Version | BLE V4.2 |
| Controller Size | 43 x 22 x 11 mm |
| Controller Weight | 30g |
| Max Controller Power | 10W (5V) |

Figure 7.1: Available Length Specifications (Note: 15m variant may be available in some regions)
8. User Tips
- For best visual effects, consider the placement of the lights to maximize their 'dream color' capabilities.
- Experiment with different music genres to see how the lights react in music sync mode.
- Utilize the app's scene presets for quick theme changes, or create your own custom lighting patterns.
- Keep the IR remote handy for quick on/off and basic color changes, reserving the app for more detailed customization.
9. Warranty and Support
Your WS2812B RGBIC LED String Light comes with a 2-year warranty from the date of purchase.
For any product issues, defective products, or support inquiries, please contact our customer service team:
Email: Servicewip1@outlook.com
We aim to reply to all inquiries within 24 hours.
A comprehensive user manual in PDF format may also be available for download from the seller's product page or by contacting support.