Airepair HP-65M Mini Digital Display Adjustable Constant Temperature Heating Platform User Manual

1. Introduction

The Airepair HP-65M is a miniature constant-temperature heating platform designed for precision heating tasks in electronics repair and other applications. It features a wide adjustable temperature range, efficient PD fast charging, and a dual-mode LED display for easy monitoring and control. Its compact and portable design makes it an ideal tool for various maintenance and disassembly operations.

Airepair HP-65M Mini Constant Temperature Heating Platform overview — Figure 1: Airepair HP-65M Mini Constant Temperature Heating Platform

2. Safety Information

Please read and understand all safety instructions before using the heating platform to prevent injury or damage to the device.

Always use a power source matching the heating pad's rated voltage.
This heating pad requires a PD protocol 20V 3.25A fast charger for power supply. Do not use non-matching power cords or plugs.
Regularly inspect the power plug and cord for damage or aging. If issues are found, immediately stop use and replace them to prevent hazards such as short circuits or electrical leakage. Do not disassemble or modify the unit.
Operators must follow instructions, familiarize themselves with the heating pad's operating procedures, hazard warnings, and precautions.
Before powering on, thoroughly inspect all heating pad components and protective devices for completeness and integrity. Ensure the work area is free of debris. Only proceed after confirming no abnormalities exist.
After activating the heating pad, avoid immediate contact with the heating zone to prevent burns. Monitor for unusual noises or odors during operation. If abnormalities occur, immediately disconnect power and contact qualified personnel for inspection.
When setting temperatures, configure parameters appropriately based on the material, size, and process requirements of the heated object to prevent fires or damage from excessive heat.
Avoid frequent temperature adjustments during heating to maintain stability and accuracy of temperature control. When placing the object to be heated, handle it with care and ensure it rests securely on the heating platform.
Strictly prohibit placing flammable or explosive items such as paper, alcohol, or gasoline on the heating platform to prevent fire or explosion accidents.
Keep children away to prevent burns from curious touching.

3. Package Contents

Verify that all items are present and in good condition upon opening the package:

Heating platform x1
Instruction manual x1
Packaging box x1

Airepair HP-65M package contents including heating platform, manual, and box — Figure 2: Package Contents

4. Product Overview

The Airepair HP-65M is a compact and efficient heating platform. Its design prioritizes portability and ease of use, making it suitable for various precision heating tasks.

4.1 Key Features

Adjustable Temperature Range: 10°C–240°C for diverse heating needs.
Efficient Heating: 65W high power with an aluminum-based heating plate for rapid temperature rise.
Dual-Color Safety Indicator: Blue light for power status, red light for high-temperature warnings.
Durable Structure: PCB heat shield and non-slip base for safe and stable operation.
Compact Design: Small, lightweight, and portable.
Dual-Mode LED Display: Switch between Data Mode and Waveform Mode for monitoring.

Airepair HP-65M held in hand, showing its ultra-mini size — Figure 3: Ultra-mini size for portability

Diagram showing faster heating and stable temperature reaching 240°C in 3 minutes — Figure 4: Faster and more stable heating

Diagram of a smart chip for precise temperature control — Figure 5: Smart Chip for precise temperature control

5. Specifications

Parameter	Value
Product Name	Mini Constant Temperature Heating Pad
Power Supply	PD 65W 20V 3.25A Fast Charger
Input Voltage	20V
Heating Power	65W (Max)
Input Current	3.25A
Charging Port	PD Type-C interface
Adjustable Temperature	10°C–240°C
Heating Plate	Aluminum-based heating plate
Insulation Plate	PCB insulation plate
Base Material	ABS+PC
Dimensions (L x W x H)	65mm x 65mm x 39mm (2.56in x 2.56in x 1.53in)

Table of product parameters for the heating pad — Figure 6: Product Parameters

Diagram showing the dimensions of the heating platform: 65mm x 65mm x 39mm — Figure 7: Product Dimensions

6. Setup

Unpack: Carefully remove the heating platform and all accessories from the packaging.
Inspect: Check the device for any visible damage. Ensure the power plug and cord are in good condition.
Connect Power: Connect a PD protocol 20V 3.25A fast charger to the Type-C charging port. The device will automatically power on when plugged in.

Image showing the heating platform automatically powering on when plugged in via Type-C — Figure 8: Automatic Power-On

Video 1: Product demonstration showing unboxing, power-on, temperature setting, and desoldering process.

7. Operating Instructions

7.1 Main Interface

Upon power-on, the main interface displays the current temperature, set temperature, input voltage, heating switch status, and a power progress bar.

Diagram of the main interface showing current temperature, input voltage, set heating temperature, power progress bar, and heating switch — Figure 9: Main Interface Details

7.2 Setting Temperature

Decrease Temperature: Single or long press the "-" key to reduce the set temperature.
Increase Temperature: Click or long press the "+" key to increase the set temperature.
The user can set the heating temperature with a power-off memory function.

7.3 Heating On/Off

On the main interface, simultaneously click the "+" and "-" keys to turn the heating switch on or off.

7.4 Switching Display Modes (Data Mode / Waveform Mode)

From the main interface, press and hold the "+" and "-" keys simultaneously to enter the Settings interface.
In the Settings interface, click "+" or "-" to switch between "detail" (Data Mode) and "wave" (Waveform Mode).
Click "+" and "-" simultaneously to confirm the selection.
Press and hold "+" and "-" simultaneously to exit the Settings interface.

7.5 Indicator Lights

Heating On: Blue light is always on.
Heating Deactivated: Blue light is off.
Current Temperature Exceeds 200°C: Red light flashes (warning).

Diagram explaining the indicator lights: blue for heating on/off, red for over 200°C — Figure 10: Indicator Lights Explanation

8. Maintenance

Cleaning: Ensure the device is powered off and cooled down before cleaning. Use a soft, dry cloth to wipe the surfaces. Avoid using abrasive cleaners or solvents.
Inspection: Regularly inspect the power cable and plug for any signs of wear or damage.
Storage: Store the heating platform in a dry, dust-free environment when not in use. Its compact size allows for effortless portability and flexible storage.

9. Troubleshooting

Device not powering on: Ensure the PD protocol 20V 3.25A fast charger is correctly connected and functioning. Check the power cable for damage.
Unusual Noises or Odors: If you notice any unusual noises or odors during operation, immediately disconnect power and contact qualified personnel for inspection.
Temperature Instability: Avoid frequent temperature adjustments during heating to maintain stability and accuracy.
Buzzer Issues: If the buzzer causes the controller to reboot or behaves unexpectedly, it may indicate a short circuit. Discontinue use and seek professional repair.

10. User Tips

Electronic components can often be safely removed from a PCB at around 160°C.
The device heats up quickly, reaching maximum temperature in as little as 3 minutes.
A helpful beep indicates when the set temperature has been reached.
Its small size is a significant advantage, saving desk space.
Ensure you have a compatible 20-volt, 5-amp power supply for optimal performance, as it is not typically included.

11. Warranty and Support

For any technical issues, questions, or support needs, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.

Airepair HP-65M