ANYFAR NTG 6.0 MBUX System Retrofit Kit

Contents

Wireless CarPlay Android Auto Retrofit Kit Decoder Box User Manual

For Mercedes Benz NTG 6.0 MBUX System 2019+

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Wireless CarPlay Android Auto Retrofit Kit Decoder Box. This device allows you to integrate Apple CarPlay and Android Auto functionalities into your Mercedes Benz vehicle while retaining the original factory car screen and system.

Wireless CarPlay Android Auto Retrofit Kit Decoder Box and Car Screen Interface

Figure 1: Product Overview - Decoder Box and Integrated Display

The system supports both wired and wireless connections for CarPlay and Android Auto, enabling seamless access to online maps, music, podcasts, and phone information directly on your car's display.

Switching between OEM Car System and CarPlay/Android Auto

Figure 2: Switching between OEM Car System and CarPlay/Android Auto. Long press the 'back' button on the car knob to switch.

2. Compatibility

This retrofit kit is exclusively compatible with Mercedes Benz vehicles equipped with the NTG 6.0 MBUX System. Please verify your car's original radio homescreen menu picture to ensure compatibility before installation.

Mercedes Benz NTG System Compatibility Check

Figure 3: Compatibility Check - Ensure your original radio is NTG 6.0. NTG 4.5, 4.7, 5.0/5.1 are NOT compatible.

2.1 Applicable Car Models

The following table lists compatible Mercedes Benz NTG 6.0 models:

Compatible Mercedes Benz NTG 6.0 Model List

Figure 4: Compatible Mercedes Benz NTG 6.0 Model List

Table 1: Compatible Mercedes Benz NTG 6.0 Models
Car ModelYearScreen Size
A-Class (W177)2019+10.25-inch
B-Class (W247)2020+10.25-inch
E-Class (W213)2020+12.3-inch/10.25-inch
G-Class (W463)2019-202012.3-inch
V-Class (W447)2019+10.25-inch
CLA(C118)2019+10.25-inch
CLS(C257)2020+12.3-inch/10.25-inch
GLA(H247)2019+10.25-inch
GLB(X247)2019+10.25-inch
GLC(X253)2020+10.25-inch
GLS(X167)2019+10.25-inch
GLE(W167)2020+10.25-inch
EQA(H243)2020-202210.25-inch
EQB(X243)2020-202210.25-inch
EQC2020-202210.25-inch

3. Setup and Installation

3.1 Installation Manual

Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

Decoder Box in Car Footwell

Figure 5: Decoder box placement during installation.

Decoder Box with Connected Wires

Figure 6: Decoder box with main harness connected.

Connecting Pink/Purple Connector

Figure 7: Detail of connecting the pink/purple connector.

Wiring Diagram

Follow the wiring diagram carefully to connect the decoder box to your vehicle's existing system. Ensure all connections are secure.

Installation Wiring Diagram

Figure 8: Installation Wiring Diagram. Connect LVDS-IN, LVDS-OUT, CAMERA/USB, POWERCAN from the decoder box to the factory LVDS and Power Harnesses.

3.2 DIP Settings & Switch

After physical installation, configure the DIP switches on the decoder box according to your specific car model and screen size. Incorrect DIP settings may lead to improper functionality.

Table 2: DIP Settings by Car Model and Screen Size
Car ModelYearScreen SizeDIP Setting
A-Class (W177)2019+10.25-inch236
B-Class (W247)2020+10.25-inch236
E-Class (W213)2020+12.3-inch/10.25-inch2345/2346
G-Class (W463)2019-202012.3-inch236
V-Class (W447)2019+10.25-inch236 ON (Connect ACC)
CLA(C118)2019+10.25-inch236
CLS(C257)2020+12.3-inch/10.25-inch2345/236
GLA(H247)2019+10.25-inch236
GLB(X247)2019+10.25-inch236
GLC(X253)2020+10.25-inch236
GLS(X167)2019+10.25-inch236
GLE(W167)2020+10.25-inch236
EQA(H243)2020-202210.25-inch236
EQB(X243)2020-202210.25-inch236
EQC2020-202210.25-inch236

Note: Ensure the dial is set to "ON" for the specified DIP switches. After changing DIP settings, you must reboot the decoder box for the changes to take effect.

4. Operating Instructions

4.1 Wireless Connection (CarPlay & Android Auto)

The system utilizes wireless CarPlay and Android Auto, supporting audio and video separation. For optimal performance, ensure your vehicle's audio system is set to Bluetooth music mode.

Connection Steps:

  1. Turn on your phone's Bluetooth and Wi-Fi.
  2. On your phone, search for Bluetooth devices and select the device named

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.