HOMEFISH LKTMWL02-ZX

Contents

HOMEFISH Smart WiFi/Zigbee Temperature and Humidity Sensor

Model: LKTMWL02-ZX

1. Product Overview

The HOMEFISH Smart Temperature and Humidity Sensor is a compact device designed to monitor indoor environmental conditions. It features an LCD display for real-time readings and supports both WiFi and Zigbee protocols for smart home integration. This sensor can connect to platforms like Tuya Smart, Amazon Alexa, and Google Home, allowing for remote monitoring and automation of other smart devices based on temperature and humidity levels.

HOMEFISH Smart Temperature and Humidity Sensor showing both WiFi and Zigbee versions
Figure 1: HOMEFISH Smart Temperature and Humidity Sensor (WiFi and Zigbee versions)

For a comprehensive digital user manual, please scan the QR code provided in Figure 2 or refer to the official PDF document: Digital User Manual (PDF).

QR code for Digital User Manual
Figure 2: QR Code for Digital User Manual

2. Setup and Installation

2.1 What's in the Box

  • HOMEFISH Smart Temperature and Humidity Sensor (WiFi or Zigbee version)
  • Quick Start Guide (refer to digital manual for full details)

2.2 Battery Installation

The sensor requires two AAA batteries (not included). Open the battery compartment on the back of the device and insert the batteries, ensuring correct polarity.

2.3 Device Placement

Choose a central location in the room where you want to monitor temperature and humidity. Avoid placing the sensor near direct sunlight, air vents, or heat sources, as this can affect accuracy.

2.4 Easy Installation Steps

  1. Peel off the cover of tape: Remove the protective film from the adhesive backing on the sensor.
  2. Stick on the wall: Firmly press the sensor onto a clean, dry, flat surface at your desired location.
  3. Configure on the App: Proceed to the app configuration steps.
Diagram showing easy installation steps: peel tape, stick on wall, configure app
Figure 3: Easy Installation Steps

2.5 App Download and Pairing

  1. Download the App: Scan the QR code below (Figure 4) to download the Tuya Smart app or search for 'Tuya Smart' in your app store.
  2. Reset the Device: With the device powered on, press the reset button (small hole) for 5 seconds using a pin until the indicator light flashes, then release. This puts the device into pairing mode.
  3. Pair the Device: Open the Tuya Smart app, add a new device, and follow the on-screen instructions to connect your sensor to your WiFi network (for WiFi version) or Zigbee gateway (for Zigbee version).
QR code for app download
Figure 4: QR Code for App Download

3. Operating Instructions

3.1 Real-time Monitoring

The sensor's LCD display shows current temperature and humidity readings. You can also view these readings in real-time on your smartphone via the Tuya Smart app from anywhere.

3.2 Manual Refresh

The thermometer has a refresh button (often the same as the reset button, or a dedicated touch area). One click will refresh the temperature and humidity readings on the display and in the app.

3.3 Smart Automation

Integrate the sensor with other smart home devices through the Tuya Smart app. You can set up automation rules based on temperature and humidity thresholds:

  • Temperature Control: Automatically turn on or off your air conditioner when the temperature reaches a pre-set level.
  • Humidity Control: Automatically turn on or off your humidifier when the humidity level drops below or rises above a pre-set level.
Sensor interacting with an air conditioner
Figure 5: Automation Example - Controlling an Air Conditioner
Sensor interacting with a humidifier
Figure 6: Automation Example - Controlling a Humidifier

3.4 Voice Control

The sensor is compatible with Amazon Alexa and Google Home. Once integrated, you can use voice commands to inquire about the current temperature and humidity.

Example commands:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.