1. Introduction
Thank you for choosing the COOSPO BK805 Speed Cadence Sensor. This device is a versatile bicycle computer sensor designed to track your cycling speed or cadence. Featuring dual-mode connectivity (Bluetooth 5.0 and ANT+), it offers broad compatibility with various cycling computers, GPS watches, and smartphone applications. Its robust design, including IP67 waterproofing, ensures reliable performance in diverse conditions.

2. Package Contents
Please check the box to ensure all items are present:
- COOSPO BK805 Sensor Unit
- Rubber Band Mount
- Zip Ties (multiple)
- Crank Magnet (for cadence mode)
- Allen Key

3. Setup and Installation
3.1. Mode Selection
The BK805 sensor can operate in either Speed mode or Cadence mode. To switch between modes:
- Press the button on the side of the sensor.
- Observe the LED indicator:
- Green LED: Sensor is in Cadence Mode.
- Blue LED: Sensor is in Speed Mode.
- Press the button again to toggle between modes until the desired mode's LED color is displayed.
3.2. Installation for Cadence Mode (Green LED)
In Cadence Mode, the sensor measures your pedaling revolutions per minute (RPM).
- Attach the sensor to the inside of your non-drive side crank arm using the provided rubber band or zip ties. Ensure it is securely fastened and does not interfere with pedaling.
- Attach the crank magnet to the bicycle frame, ensuring it passes within 1-2mm of the sensor's marked area (usually indicated by a small arrow or line) as the crank arm rotates. The magnet must be attracted to the sensor for accurate cadence readings.
3.3. Installation for Speed Mode (Blue LED)
In Speed Mode, the sensor measures your wheel rotations to calculate speed and distance.
- Attach the sensor to the hub of either your front or rear wheel using the provided rubber band or zip ties. Ensure it is securely fastened and does not interfere with wheel rotation or spokes.
- No magnet is required for Speed Mode.


4. Operating Instructions
4.1. Pairing with Devices
The BK805 sensor supports both ANT+ and Bluetooth Smart (BLE) protocols, allowing it to connect to a wide range of devices.
- Activate the Sensor: Rotate your crank arm (for cadence) or wheel (for speed) a few times to wake up the sensor. The LED will flash briefly.
- Enable Bluetooth/ANT+ on your device: Turn on Bluetooth on your smartphone or activate ANT+ search on your cycling computer/GPS watch.
- Search for Sensor: On your device, search for new sensors. The BK805 should appear as a 'Speed' or 'Cadence' sensor (depending on its current mode).
- Connect: Select the BK805 from the list of available devices to pair.
4.2. LED Indicators
- Green LED (Cadence Mode): Flashes when the sensor detects crank rotation.
- Blue LED (Speed Mode): Flashes when the sensor detects wheel rotation.
- Solid LED (briefly): Indicates mode change or power-on.
4.3. Compatibility
The COOSPO BK805 is compatible with a wide range of devices and applications:
- ANT+ Compatible Devices: COOSPO, Garmin, Wahoo, iGPSPORT, Zwift, Onelap, Bkool, Tacx, Bryton, and other ANT+ enabled cycling computers and GPS watches.
- Bluetooth Compatible Apps: CoospoRide, Strava, Nike+, Endomondo, Runtastic Pro, Wahoo Fitness, and other Bluetooth Smart cycling apps.


5. Maintenance
5.1. Battery Replacement
The BK805 sensor uses a CR2032 coin cell battery. When the sensor stops transmitting data or the LED indicators become dim, it's time to replace the battery.
- Using a coin or a small flat-head screwdriver, carefully twist open the battery cover on the back of the sensor.
- Remove the old battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Align the battery cover and twist it back into place until it is securely sealed.
5.2. Cleaning and Care
- Wipe the sensor with a soft, damp cloth to remove dirt and sweat. Do not use abrasive cleaners or solvents.
- Ensure the battery cover is properly sealed to maintain its waterproof rating.
- Store the sensor in a cool, dry place when not in use.
5.3. Water Resistance
The COOSPO BK805 sensor has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in rainy conditions but should not be submerged in water.
6. Troubleshooting
- Sensor not detected by device:
- Ensure the sensor is awake by rotating the crank/wheel.
- Check the battery level and replace if necessary.
- Ensure Bluetooth/ANT+ is enabled on your receiving device.
- Move the sensor closer to your receiving device.
- Try restarting both the sensor (by removing and reinserting the battery) and your receiving device.
- No data or incorrect data:
- Verify the sensor is in the correct mode (green for cadence, blue for speed).
- For cadence mode, ensure the magnet is properly aligned and passes within 1-2mm of the sensor.
- Ensure the sensor is securely mounted and not moving or rubbing against other bike parts.
- Check for any physical obstructions or damage to the sensor.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | COOSPO |
| Model Number | COOSPO BK805 |
| Stopwatch and Accessories | Wireless Stopwatch |
| Type | Wireless |
| Waterproof Level | IPX6 |
| Automatic Sleep | Y |
| Auto-pause | Y |
| External Devices | Y |
| Touch Screen | N |
| Display Color | Black and White |
| Navigation | Y |
| Charging Interface Type | Other (Battery Powered) |
| Display Size | Other |
| Language | Other |
| High-concerned chemical | None |
| Origin | Mainland China |
8. User Tips
No specific user tips are available from the provided data. For optimal performance, ensure the sensor is always securely mounted and the battery is fresh.
9. Warranty and Support
For warranty information, technical support, and service inquiries, please refer to the manufacturer's official website or contact your retailer. Keep your proof of purchase for warranty claims.