INSE I8

Contents

INSE I8 Corded Vacuum Cleaner User Manual

Model: I8

1. Introduction

The INSE I8 Corded Vacuum Cleaner is designed for efficient and powerful cleaning across various surfaces. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your vacuum cleaner.

INSE I8 Corded Vacuum Cleaner in stick and handheld modes
INSE I8 Corded Vacuum Cleaner showcasing its versatility in stick and handheld configurations.

2. Product Overview

The INSE I8 is a corded stick vacuum cleaner featuring a one-touch mode for straightforward operation and consistent powerful suction. Its extra-long cord ensures extensive reach, allowing you to clean all corners of a room without frequently changing power outlets.

2.1 Components

Exploded view of INSE I8 vacuum cleaner components
Exploded view of the INSE I8 vacuum cleaner components, including the motor, filters, and various attachments.
Item Description Quantity
1Main Motor1
2Metal Tube1
3Floor Brush1
42-in-1 Brush1
5Long Crevice1
6Power Cord1
7Wall Bracket1
8Roller Cleaning Tool1
9Filter Component1
10Filter2

3. Setup and Assembly

3.1 Assembling the Vacuum Cleaner

  1. Connect the Metal Tube: Slide the telescopic metal tube onto the main motor until it clicks securely into place.
  2. Attach the Floor Brush: Push the telescopic tube into the floor brush until it clicks.
  3. Attach Accessories: For cleaning high positions or specific areas, various accessories (e.g., 2-in-1 brush, long crevice tool) can be connected directly to the main motor or to the metal tube.
Diagram showing assembly of main motor, metal tube, and floor brush
Diagram illustrating the connection points for the main motor, metal tube, and floor brush.

3.2 Wall Mount Installation (Optional)

To store your vacuum cleaner conveniently, you can install the provided wall bracket:

  1. Choose Location: Select a location near a power outlet, high enough on the wall to allow the telescopic wand and floor nozzle to hang freely.
  2. Mark Drill Holes: Place the wall mount against the wall and use a pencil to mark the positions for drilling.
  3. Drill and Install Anchors: Drill holes (using a 1/4" bit) and insert drywall anchors.
  4. Secure Mount: Insert screws through the holes on the mount and tighten them until the bracket is firmly attached to the wall.
Quick Start Guide with assembly and cleaning instructions
Quick Start Guide from the packaging, detailing assembly and basic cleaning steps.

4. Operating Instructions

4.1 Powering On/Off

The vacuum cleaner features a simple one-touch power switch. Press the switch to turn the unit on or off.

4.2 Cleaning Modes

The INSE I8 operates with powerful suction suitable for various cleaning tasks. It can be used as a full-size stick vacuum for floors and carpets, or as a handheld unit with attachments for upholstery, stairs, and hard-to-reach areas.

Product demonstration video showing the vacuum cleaning various surfaces and in different configurations.

4.3 Versatile Cleaning

  • Floor Cleaning: Use the floor brush for effective cleaning on tile, hardwood, and low-pile carpets. The integrated LED lights illuminate dust and debris for thorough cleaning.
  • Under Furniture: The flexible design of the floor brush allows it to reach under furniture easily.
  • Handheld Cleaning: Detach the main motor and attach the 2-in-1 brush or long crevice tool for cleaning sofas, car interiors, shelves, and other elevated surfaces.
Vacuum cleaner head with LED lights cleaning under furniture
The vacuum cleaner head with LED lights effectively cleans dust and debris under furniture.
Woman using handheld vacuum with crevice tool to clean a sofa
Woman demonstrating the use of the handheld vacuum with a crevice tool for cleaning upholstery.
Vacuum cleaner head adapting to different floor types
The vacuum cleaner head is designed to adapt to various floor types, including tile, hardwood, and low-pile carpets.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your INSE I8 vacuum cleaner.

5.1 Daily Maintenance of Main Motor

  1. Turn off the vacuum cleaner before cleaning.
  2. Wipe the surface with a clean, damp cloth.
  3. Avoid getting water into the inner part of the main motor.
  4. Do not place the vacuum cleaner under direct sunlight or in wet areas after cleaning.

5.2 Cleaning the Detachable Roller Brush

If the roller brush becomes tangled or stuck, an alert may appear on the LED display. Clean it promptly:

  1. Unlock the side lock on the bottom of the cleaner head.
  2. Remove the side cover and take out the roller brush.
  3. Use the provided cleaning gadget to remove tangled hairs and debris.
Diagram showing how to remove and clean tangled hairs from the roller brush
Diagram illustrating the steps to remove and clean tangled hairs from the roller brush.

5.3 Emptying the Dust Cup and Cleaning Filters

Empty the dust cup regularly to maintain consistent suction power. The INSE I8 features a multi-stage filtration system, including a metal filter screen and HEPA filter.

IMPORTANT:

  • Check and clean the metal filter screen and filter regularly.
  • Clean the filter if suction performance declines.
  • Replace the filter if it is broken or cannot maintain suction performance.
  • Do not bend or squeeze the filter.
  1. Empty Dust Cup: Hold the cleaner over a waste basket. Press the lever to release the bottom lid of the dust cup and empty its contents.
  2. Remove Filters: Use the one-touch removal mechanism to open the dust box. Turn left to remove the filter, then turn right to reinstall.
  3. Clean Filters: If the strainer and sponge are very dirty, wash them with cool water. Clean the filter with the cleaning brush.
  4. Dry Filters: Ensure all filter components are completely dry before reassembling.
  5. Reassemble: Ensure the filter is correctly secured during assembly.
Image showing how to empty the dust cup with a one-click mechanism
Image demonstrating the one-click mechanism for emptying the dust cup.
Diagram illustrating the multi-stage filtration system and how to clean the filters
Diagram illustrating the multi-stage filtration system and the process for cleaning the filters.

5.4 General Cautions for Maintenance

  • Pay attention to sharp objects like glass to prevent injury.
  • Do not wash the mechanical part of the dust box with water.
  • Ensure each part is completely dry before next use.
  • Do not scrub the filter or apply undue force.
  • Change the filter if damaged or if cleaning does not restore its pristine state.
  • Do not charge if the ambient temperature is below 5°C or above 40°C.
  • If the power indicator flickers due to insufficient power during operation, recharge the unit.

6. Troubleshooting

Problem Possible Causes Solution
The product stops working suddenly
  1. Plug not firmly connected to power outlet.
  2. Suction port or filter components are blocked.
  1. Reconnect the plug to the power outlet and confirm power supply.
  2. Remove the blockage, wait 35 minutes for the product to cool, then resume use.
The vacuum cleaner could not stay on (shuts down automatically) Blockage of the roller brush activates the Rotation-Clogging Protective System.
  1. Clean tangled hairs from the brush.
  2. Remove the side-end cover from the roller brush to clean tangled hair.
Suction power is getting weaker
  1. Dust cup or filters are full of dust.
  2. Metal tube or motorized floor brush is clogged.
  1. Clean the dust cup and filters. Replace filters if necessary.
  2. Clean tangled hairs from the roller brush or blockages in the tube.

7. Safety Instructions

  • Do not place the vacuum cleaner near heat sources, radiation, or burning cigarettes.
  • Do not use the appliance to remove the following objects:
    1. All liquids such as water and solvents.
    2. Lime, cement, ash, and other construction dust and garbage.
    3. Hot objects, such as cigarette butts.
    4. Sharp debris, such as glass shards.
    5. Flammable and explosive articles, such as gasoline or alcohol products.
  • Do not allow children to play with or operate the vacuum cleaner.
  • The vacuum cleaner is an electrical appliance; use it appropriately and do not leave it unattended while operating.
  • Turn off the power during cleaning, maintenance, or storage.
  • Do not pull the power plug to turn off the vacuum cleaner. Hold the plastic part of the plug to remove it from the power socket.
  • Ensure the power supply voltage matches the vacuum cleaner's charging voltage.
  • Keep the power cord away from sharp objects to prevent damage.
  • To prevent fires, do not immerse the vacuum cleaner in water or expose it to heating appliances.
  • Do not drag the power cord when moving the charging station.
  • Do not use the vacuum cleaner and send it to an approved maintenance facility if:
    • The vacuum cleaner fell and was damaged.
    • The power cord is damaged.
  • Stop operating the vacuum cleaner if the suction inlet is blocked to prevent damage (e.g., overheating) to the motor or deformation of plastic parts.

8. Specifications

Upgraded motor with 20ft cord and no runtime limit
Image highlighting the upgraded motor, 20ft cord, and continuous runtime.
Attribute Value
Product CategoryI8
Weight (All Accessories Included)3 KG
Net Weight2.5 KG
Nominal Voltage110V-240V
Nominal Power600W
Size (mm)440*260*190
Retractable Tube Length47/77 cm
Cord Length6 meters
Number of operating modes1-2
Battery TypeN/A (Corded)
Liquid tank volume<3L
Turbo BrushNo
Dust Box Capacity (L)0.6-1 L
Filter TypeHEPA
LCDNo
Cleaning RouteRandom Type
Bag Or BaglessBagless
Timing ReservationNo
Special Suction NozzleFlat Suction Nozzle
Dust Storage TypeDust Box/Dust Bucket
InstallationHand Held
CertificationCE
FunctionDry
OriginMainland China
Remote ControlNo
Battery LifeNone

9. Warranty and Support

This warranty term provides specific legal rights, and you may also have other rights that vary by state.

9.1 Warranty Coverage

  • 24-month Warranty & Lifetime Customer Support: Applies only to eligible purchases made directly from authorized distributors.
  • Warranty coverage applies to the original owner and the original product only and is not transferable.

9.2 How to Initiate a Warranty Claim

If your appliance operates improperly under normal household conditions within the warranty period, please contact customer support at helpeu@vacservice.vip to fill out the warranty form and initiate a claim.

For a comprehensive user manual, you can refer to the official PDF document: INSE I8 User Manual (PDF).

10. User Tips

  • Cord Length: The 6-meter cord provides excellent reach, allowing you to clean large areas without frequently changing power outlets.
  • Carpet Performance: While effective on hard floors and low-pile carpets, the vacuum may not be ideal for plush or high-pile carpets due to the floor head's movement.
  • Motor Heat: It is normal for the handle to warm up during continuous use. The vacuum is designed to cool down quickly.
  • Dust Cup Capacity: The dust cup has a capacity of 0.6-1L. For optimal suction, empty it regularly, especially after cleaning heavily soiled areas.
  • Suction Power: The vacuum provides effective suction for general household cleaning on hard floors and low-pile carpets.
  • Replacement Filters: Replacement HEPA filters can be sourced from the manufacturer or authorized retailers to maintain filtration efficiency.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.