1. Introduction
This manual provides essential information for the installation, use, and maintenance of the Radiator Bracket Mount. Please read this manual thoroughly before installation to ensure proper function and safety.
This product is an aftermarket automotive part designed to replace original radiator mounting brackets in compatible vehicles. It is not an original equipment manufacturer (OEM) part.
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Radiator Bracket Mount |
| Model Number (OEM NO.) | 1321001080 |
| Material | Iron + Rubber |
| Placement on Vehicle | Front |
| Quantity per package | 3 pieces |
| Dimensions (approx.) | 60mm (width) x 50mm (height) |
| Weight (per package) | 0.45 kg |
| Country/Region of Manufacture | China (Mainland China) |
Compatible Vehicle Models:
- For Fiat Ducato 230 244 Models (1994-2006)
- For Peugeot Boxer 230 244 Models (1994-2006)
- For Citroen Relay 230 244 Models (1994-2006)
4. Installation Instructions
This product is designed for direct replacement of the original vehicle radiator mounting brackets. Professional installation is recommended.
- Ensure the vehicle's engine is cool and the ignition is off.
- Locate the existing radiator mounting brackets.
- Carefully remove the original vehicle radiator mounting brackets.
- Position the new Radiator Bracket Mounts (3 pieces) in the corresponding locations.
- Secure the new brackets, ensuring they are firmly attached and the radiator is stable.
5. Operating Instructions
As a static mounting component, this product does not require active operation. Once correctly installed, it functions passively to secure the radiator.
6. Maintenance
Regular inspection of the radiator bracket mounts is recommended to ensure continued secure fitment and prevent potential issues.
- Periodically check the brackets for any signs of wear, corrosion, or damage.
- Ensure all fasteners are tight and the radiator remains stable.
- Clean the brackets as needed to remove dirt or debris that could accelerate wear.
- If any damage is observed, replace the brackets immediately.
7. Troubleshooting
If you experience issues after installing the radiator bracket mounts, consider the following:
- Loose Radiator: Re-check the installation steps to ensure the brackets are correctly positioned and securely fastened. Verify that the correct part number (1321001080) was used for your vehicle model.
- Unusual Noises: Ensure no components are rubbing against the new brackets or the radiator. Re-verify proper alignment.
- Damaged Bracket: If a bracket appears damaged upon inspection, it must be replaced. Do not attempt to repair damaged brackets.
8. User Tips
- Always use appropriate tools for removal and installation to avoid damaging the brackets or surrounding vehicle components.
- Consider applying a small amount of anti-seize compound to bolts during installation to facilitate future removal.
- When replacing, ensure all three brackets are replaced for consistent support and longevity.
9. Warranty & Support
Standard Warranty (Racbox)
Racbox represents and warrants to the first end-user ("End-User") of the Product that the Product shall materially conform to Racbox's published specifications in the user manual, subject to the terms and conditions below.
Warranty Period:
One Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.
What is Covered:
The Standard Warranty provides support as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for replacement parts, partial refund, or full refund in the Warranty Period on any product due to manufacturing defects of components or workmanship.
What is NOT Covered:
The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.
How to Get Warranty Service:
If you have any other questions, feel free to contact customer support, either by phone, email, or through their Live Support system.
Manufacturer Information:
Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com