CETANT PL230

Contents

Nordic LED Glass Pendant Light Instruction Manual

Model: PL230 | Brand: CETANT

1. Product Overview

The CETANT PL230 Nordic LED Glass Pendant Light is designed to provide modern and elegant illumination for various indoor spaces such as parlors, studies, bedrooms, and hotel rooms. This fixture features a single integrated LED light source encased in a stylish glass shade, available in different finishes and sizes.

Three amber glass pendant lights hanging in a modern dining area.

Figure 1: Nordic LED Glass Pendant Light (Amber Finish)

2. Safety Information

  • Always disconnect power at the circuit breaker before installation, cleaning, or maintenance.
  • Do not install this fixture in flammable or humid locations.
  • Ensure all electrical connections are secure and comply with local electrical codes.
  • If you are unsure about any part of the installation, consult a qualified electrician.
  • This product is for indoor use only.

3. Package Contents

Before beginning installation, ensure all parts are present and undamaged. The package typically includes:

  • Pendant Light Fixture (Glass Shade, Integrated LED Module, Cord)
  • Ceiling Canopy
  • Mounting Bracket/Hanging Plate
  • Screws and Wall Anchors (Rubber Plugs)
  • Wire Connectors

4. Setup and Installation

Important: Ensure the main power supply is turned off at the circuit breaker before starting installation.

  1. Prepare the Location: Determine the desired location for the pendant light on the ceiling. Mark the drilling points for the mounting bracket.
  2. Drill Holes: Drill holes at the marked points. Insert the provided rubber plugs (wall anchors) into the drilled holes and gently tap them with a hammer until flush with the ceiling.
  3. Attach Mounting Bracket: Secure the mounting bracket (hanging plate) to the ceiling using screws, ensuring it is firmly attached.
  4. Electrical Connection:
    • Connect the live (fire), neutral (zero), and ground wires from your ceiling electrical box to the corresponding wires of the pendant light fixture using wire connectors.
    • Ensure connections are tight and secure.
  5. Secure Canopy: Carefully tuck the wires into the ceiling box and align the pendant light's canopy with the mounting bracket.
  6. Final Attachment: Tighten the screws and fix the light to the ceiling, securing the canopy to the mounting bracket.

Pre-installation requirements:

  • Check all parts and accessories of the lamp.
  • Cut off the power supply or close the main brake before installation.
  • Do not place lamps in flammable and humid places.

5. Operating Instructions

Once installed, the pendant light operates via a standard wall switch connected to its circuit. Simply toggle the wall switch to turn the light on or off.

  • Dimmability: This fixture is NOT dimmable. Do not connect it to a dimmer switch, as this may damage the integrated LED module.
  • Light Color: The fixture provides warm light.

6. Maintenance

To ensure the longevity and appearance of your pendant light, follow these maintenance guidelines:

  • Cleaning: Before cleaning, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to wipe the glass shade and metal components. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
  • Avoid Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the fixture.
  • Bulb Replacement: This fixture uses integrated LED bulbs. These are not user-replaceable. If the LED module fails, professional assistance may be required, or the entire fixture may need replacement.

7. Troubleshooting

If your pendant light is not functioning correctly, try the following steps:

  • Light Does Not Turn On:
    • Check if the wall switch is in the "ON" position.
    • Verify that the circuit breaker for the light fixture is not tripped.
    • Ensure all wire connections are secure (only check if comfortable and power is off).
    • Confirm that the power supply to your home is active.
  • Flickering Light:
    • Ensure the fixture is not connected to a dimmer switch.
    • Check for loose wiring connections (with power off).

If the problem persists after performing these checks, contact customer support or a qualified electrician.

8. Specifications

Diagram showing dimensions of the 15cm smoke grey pendant light: 10cm canopy diameter, 2.5cm canopy height, 15cm shade diameter, 1.2m line length.

Figure 2: Product Dimensions (15cm Smoke Grey Model)

FeatureDetail
Brand NameCETANT
Model NumberPL230 (also referred to as PLGL040 in some documentation)
Item TypePendant Lights
Light SourceIntegrated LED bulbs
Working Power12W (for single light source)
Voltage90 - 260 V AC
Luminous Flux2000-82000 Lumens (range across variants)
Lighting Area3-5 square meters
MaterialGlass Stone (Shade), Iron/Copper (Body)
TechnicsPainted
Installation TypeCord Pendant
Installation MethodAssembly
Is Bulbs IncludedYes
Is DimmableNo
Number of Light Sources1 (per pendant unit)
Base TypeWedge
CertificationsCCC, CE, PSE, ROHS
Product Dimensions (15cm model)Shade Diameter: 15cm, Canopy Diameter: 10cm, Canopy Height: 2.5cm, Cord Length: 1.2m (adjustable)
Package DimensionsLength: 30cm, Width: 22cm, Height: 21cm
Package Weight1.035 kg

9. User Tips

  • Light Temperature: This pendant light emits a warm light, creating a cozy and inviting atmosphere.
  • Non-Dimmable: Remember that this fixture is not dimmable. Ensure it is connected to a standard on/off switch.
  • Integrated LEDs: The LED light source is integrated. While designed for long life, it is not user-replaceable.

10. Warranty and Support

This CETANT pendant light comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or any questions regarding your product, please contact the seller or retailer from whom you purchased the item.

A comprehensive user manual is also available in PDF format. Please refer to the product listing or contact support for access to this document: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.