1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your Casio A158WA-1D digital watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

2. Setup
2.1 Initial Time and Calendar Setting
Refer to the diagram below for button functions and display elements. The setting sequence MUST BE FOLLOWED when making any new setting.

- Enter Time/Calendar Setting Mode: From the regular timekeeping mode, press the 'Mode' button (bottom left) three times. The seconds digits will start flashing.
- Adjust Seconds: Press the 'Light' button (top left) to reset seconds to 00.
- Set Hour: Press the 'Start/Stop' button (top right) to move to the hour setting. Press the 'Light' button to increase the hour.
- Set Minute: Press the 'Start/Stop' button to move to the minute setting. Press the 'Light' button to increase the minute.
- Set Month: Press the 'Start/Stop' button to move to the month setting. Press the 'Light' button to increase the month.
- Set Date: Press the 'Start/Stop' button to move to the date setting. Press the 'Light' button to increase the date.
- Set Day of Week: Press the 'Start/Stop' button to move to the day setting. Pressing the 'Light' button advances to the next day.
- Complete Setting: Press the 'Mode' button to exit the setting mode.
Quick Digit Advance: When the 'Light' button is pressed for more than 2 seconds during setting, the digit will advance quickly. Release the button to stop.
2.2 Adjusting the Watch Band
The stainless steel band features an adjustable clasp. To adjust the length, carefully lift the locking mechanism on the clasp with a small tool (e.g., a thin screwdriver) and slide the clasp along the band to the desired position. Once positioned, press the locking mechanism back down firmly to secure it.
3. Operating Instructions
3.1 Reading the Display
The display shows time (hour, minute, second), AM/PM indicator, date, and day of the week. Indicators for alarm-on, time-signal-on, and stopwatch mode are also present.
- 12-hour/24-hour Format: In regular timekeeping mode, press the 'Light' button (top left) to switch between 12-hour and 24-hour formats.
- Lighting: Press the 'Light' button (top left) briefly to illuminate the display.

3.2 Setting Daily Alarm
The daily alarm sounds for 20 seconds at the preset time each day until cleared. To stop the buzzer, press any button.
- Enter Alarm Mode: From regular timekeeping mode, press the 'Mode' button (bottom left) once.
- Set Hour: Press the 'Light' button (top left) to advance the hour.
- Set Minute: Press the 'Start/Stop' button (top right) to move to the minute setting. Press the 'Light' button to advance the minute.
- Exit Alarm Setting: Press the 'Mode' button to return to regular timekeeping mode.
Sound Demonstration: In alarm mode, press and hold the 'Light' button to sound the buzzer.
3.3 Daily Alarm and Time Signal On/Off
In alarm mode, press the 'Start/Stop' button (top right) to cycle through the following settings:
- Alarm ON and Time Signal ON (both indicators visible)
- Alarm OFF and Time Signal OFF (no indicators visible)
- Alarm ON only (alarm-on mark visible)
- Time Signal ON only (time-signal-on mark visible)
3.4 Stopwatch Operation
The stopwatch measures in 1/100-second units up to 59 minutes, 59.99 seconds.
- Enter Stopwatch Mode: From regular timekeeping mode, press the 'Mode' button (bottom left) twice.
- Start/Stop: Press the 'Start/Stop' button (top right) to start and stop the stopwatch.
- Reset: While the stopwatch is stopped, press the 'Light' button (top left) to reset it to 00:00:00.
- Split Time: While the stopwatch is running, press the 'Light' button to display a split time. The stopwatch continues to run internally. Press 'Light' again to release the split display and show the current running time.
- 1st-2nd Place Times: Start the stopwatch. Press 'Light' when the first runner finishes (records 1st place time). Press 'Start/Stop' when the second runner finishes (stops stopwatch). Press 'Light' to display 2nd place time.
- Exit Stopwatch Mode: Press the 'Mode' button to return to regular timekeeping mode.
4. Maintenance
4.1 General Care
- Cleaning: Wipe the watch with a soft, dry cloth. For stainless steel bands, a slightly damp cloth can be used, followed by drying.
- Avoid Extreme Conditions: Do not expose the watch to extreme temperatures (hot or cold), direct sunlight for prolonged periods, strong magnetic fields, or strong vibrations.
- Chemicals: Avoid contact with gasoline, cleaning solvents, aerosol sprays, adhesives, paints, etc., as they may damage the watch's resin case and band.
4.2 Water Resistance
Your Casio A158WA-1D is rated for 3 BAR (30 meters) water resistance. This means it is suitable for everyday use and can withstand splashes, rain, or brief immersion in water. However, it is NOT suitable for swimming, diving, showering, or any water sports where it might be subjected to direct water pressure or prolonged immersion. Do not operate buttons while the watch is wet.
5. Troubleshooting
- Confusing Display Information: If the display shows confusing information, it may indicate an incorrect entry sequence. Please re-read the manual and try again. This does not mean the unit components are damaged.
- Alarm/Hourly Chime Too Quiet: The alarm and hourly time signal volume are fixed and may be difficult to hear in noisy environments or if the watch is not close to your ear. This is a characteristic of the watch and not a malfunction.
- Watch Not Functioning: If the display is blank or erratic, the battery may need replacement. Contact an authorized service center.
6. Specifications
| Accuracy at Normal Temperature | ±30 seconds per month |
| Display Capacity | Hour, minute, second, am/pm, date, day |
| Calendar System | Auto-calendar (set at 28 days for February) |
| Daily Alarm Mode | Yes |
| Hourly Time Signal | Yes |
| Stopwatch Measuring Capacity | 59 minutes, 59.99 seconds |
| Stopwatch Measuring Unit | 1/100th of a second |
| Stopwatch Measuring Modes | Normal time, net time, split time, 1st-2nd place times |
| Battery Type | One lithium battery (CR-2016) |
| Approximate Battery Life | 7 years (assuming alarm operation for 20 sec./day and one light operation for 1 sec./day) |
| Water Resistance Depth | 3 BAR (30 meters) |
| Case Material | Resin |
| Band Material Type | Stainless steel |
| Band Length | 22 cm |
| Clasp Type | Hook Buckle |
| Display Type | Digital |
| Features | Luminous, LED Display, Complete Calendar, Alarm, Week Display |
| Movement | Digital |
| Package Dimensions (L x W x H) | 13 cm x 11 cm x 7 cm |
| Package Weight | 0.127 kg |
7. User Tips
- Strap Adjustment: The watch band is generally easy to adjust. Take your time to find the most comfortable fit.
- Hourly Chime: Be aware that the hourly chime can be very subtle and may not be audible in noisy environments.
- Water Exposure: While water-resistant, avoid wearing the watch during activities like swimming, showering, or bathing to prevent potential damage.
8. Warranty and Support
Your Casio watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For service or support, please contact an authorized Casio service center.
For additional information, you may consult the official user manual PDF: View User Manual (PDF)