1. Introduction and Overview
This manual provides detailed instructions for the installation, operation, and maintenance of the QRXQ RXP45 Precision CNC Synchronous Belt Axis Linear Guide Shaft Actuator. The RXP45 series is designed for high-precision, high-speed, and low-noise applications in various industrial automation scenarios.
Video: Overview of the QRXQ RXP45 Series Linear Modules, showcasing features like self-developed dust cover, flexible motor mounting, easy installation, multiple models, rabbet design for precise positioning, imported bearings, silent design, multi-wheel design for load balancing, foot mounts, sensors, self-lubricating technology, and testing under load.
2. Safety Information
Adhering to safety guidelines is crucial for preventing accidents and ensuring the longevity of the equipment.
2.1. Bolt Tightening
All bolts shall be tightened to the specified torque to prevent loosening. Re-inspection is recommended, especially after the equipment has been in operation for a period of time.
2.2. Clean Environment
The installation should be carried out in a clean environment as much as possible to prevent dust from entering the transmission system and causing unnecessary wear.
2.3. Safety First
Do not power on the equipment before installation is complete. Ensure all guards are properly installed before commissioning and operation.
3. Product Features
- High Speed Mute: Adopting industrial-grade quality bearings, combined with the height of the optical axis, ensures smooth, stable, high-speed, silent, and low-friction operation. The lifespan can reach 5 years. Suggested operating speed: 2m/s.
- Extra Long Stroke: Offers optional strokes from 100mm to 6000mm.
- Smooth and Stable: Designed for consistent and reliable motion.
- Independent Patent: Features independently developed coupling, efficient transmission core, easy compensation for installation deviation, shock absorption, and buffering to prevent excessive load.
- Self-Lubricating Technology: Incorporates self-lubricating oil technology for twin-core machines, balancing quietness and durability.
- Multi-Wheel Design: Load balancing for smooth operation and upgrades.
- Rabbet Design: Precise positioning via concave-convex fitting.
- Adjustable Limit Sensors: Limit switches can be installed at any position for convenience and practicality.
- Waterproof Timing Belt Module: Constructed from Aluminum Alloy + Stainless Steel 316, supporting customization for waterproof applications.

Image: Detailed features of the RXP45 linear module.
4. Components and Parts
The RXP45 series linear guide shaft actuator consists of several key components, which may vary slightly depending on the specific configuration (e.g., motor type, mounting style).
4.1. Core Components
- Linear Module (X, Y, Z axis)
- Motor (Stepper or Servo, e.g., 400W Servo)
- Drives
- 3-meter power line and encoder line (for servo motor sets)
- Coupling
- Synchronization Rod (for gantry systems)
- Horizontal Connecting Plate / L-shaped Connecting Plate
- Drag Chain Slot and Fixing Plates (Upper and Lower)
- Limit Sensors (EE-SX674 NPN/PNP)
- Foundations / Foot Mounts

Image: QRXQ RXP45-400W Servo Motor Linear Module with included components.

Image: Control System Options (Drives, Integrated Control Chassis, Programmable Touch Screen Chassis).
5. Setup and Installation
The RXP45 series supports various construction types. This section details the installation for common configurations. Always refer to the specific diagrams for your chosen setup.
5.1. Cross Construction (XY Axis)
This configuration involves two linear modules arranged in a cross pattern.
- Step 1: Fix the horizontal connecting plate to the X-axis linear module.
- Step 2: Fix the horizontal connecting plate to the Y-axis linear module.
- Step 3: Install the drag chain slot. Connect the lower fixing plate of the drag chain to the drag chain slot, then install the lower fixing plate on the Y-axis linear module. (Ignore if drag chain slot not included).
- Step 4: Install the upper fixing plate of the drag chain onto the horizontal connecting plate. (Ignore if drag chain slot not included).

Image: Installation Dimensions of Slide Table (RXP45X, RXP45C, RXP45H).

Image: Removable Foot Mounts and their dimensions.
5.2. Horizontal Gantry Construction
This setup uses two Y-axis modules synchronized by a shaft and an X-axis module mounted horizontally.
- Step 1: Fix the horizontal connecting plate to the X-axis linear module.
- Step 2: Connect the synchronizing shaft and the coupling. Insert the end face of the synchronizing shaft into the coupling, and then tighten the bolts. The installation method of the synchronizing shaft and coupling is the same for different module models.
- Step 3: Connect the two Y-axes with the synchronizing shaft assembly to form a synchronous operation module.
- Step 4: Mount the X-axis linear module assembled in the previous step onto the Y-axis synchronous operation module using horizontal connecting plates.
- Step 5: Install the drag chain slot. Connect the lower fixing plate of the drag chain to the drag chain slot, then install the lower fixing plate on the Y-axis linear module. (Ignore if drag chain slot not included).
- Step 6: Install the upper fixing plate of the drag chain onto the horizontal connecting plate. (Ignore if drag chain slot not included).
5.3. Side-Mounted Gantry Construction
This configuration involves a Z-axis linear module mounted on the side.
- Step 1: Connect the synchronizing shaft and the coupling. Insert the end face of the synchronizing shaft into the coupling, and then tighten the bolts. The installation method of the synchronizing shaft and coupling is the same for different module models.
- Step 2: Connect the two Y-axes with the synchronizing shaft assembly to form a synchronous operation module.
- Step 3: Install the L-shaped connecting plates onto the synchronous operation module. Due to product updates and iterations, there may be slight differences in appearance, but the installation method remains the same.
- Step 4: Install the X-axis linear module onto the L-shaped connecting plates.
- Step 5: Refer to the installation method of the drag chain trough used in the horizontal gantry setup, and install the drag chain onto the module.
- Step 6: Install the Z-axis linear module onto the X-axis linear module by referring to the cross gantry installation method. If the Z-axis linear module was not included in your order, this step can be ignored.
- Step 7: Install the X-axis drag chain trough onto the X-axis linear module by referring to the Y-axis drag chain trough installation method. If the Z-axis linear module was not included in your order, this step can be ignored.
5.4. T-type Construction
This setup uses a vertical Z-axis module mounted on a horizontal Y-axis module.
- Step 1: Connect the triangular plate fittings together with bolts. The installation method of the triangular plate assembly is the same for different module models.
- Step 2: Install the triangular plate assembly onto the Y-axis linear module.
- Step 3: Install the Z-axis linear module onto the Y-axis linear module via the triangular plate assembly. The installation method of the triangular plate assembly is the same for different module models.
- Step 4: Install the drag chain trough onto the Y-axis linear module by referring to the drag chain trough installation method for the cross gantry setup.
5.5. H-type Gantry Construction
This configuration involves two vertical Z-axis modules synchronized by a shaft, and an X-axis module mounted horizontally.
- Step 1: Connect the synchronizing shaft and the coupling. Insert the end face of the synchronizing shaft into the coupling, and then tighten the bolts. The installation method of the synchronizing shaft and coupling is the same for different module models.
- Step 2: Connect the two Y-axis modules with the synchronizing shaft assembly to form a synchronous operation module. The installation method of the X-axis synchronous operation module is the same as that of the Y-axis synchronous operation module.
- Step 3: Connect the triangular plate fittings together with bolts. The installation method of the triangular plate assembly is the same for different module models.
- Step 4: Install the triangular plate assembly onto the Y-axis linear module.
- Step 5: Mount the Z-axis synchronous operation module onto the Y-axis synchronous operation module via the triangular plate assembly.
- Step 6: Install the X-axis linear module onto the Z-axis linear module by referring to the horizontal gantry setup method.
- Step 7: Install the drag chain trough onto the Y-axis synchronous operation module by referring to the drag chain trough installation method for the horizontal gantry setup.

Image: Multi-axis module building program examples.

Image: How to use our module - Control System Components Diagram.
6. Operation
Once the linear module is correctly installed and connected to its control system (e.g., drives, motion controller, PLC), operation involves programming the desired motion profiles. The system supports high-precision, high-speed movements with low noise.
- Suggested Speed: 0-1500mm/s for Servo Motor, 0-700mm/s for Stepping Motor.
- Position Repeatability: ±0.05mm.
- Load Capacity: Max Payload Horizontal 15KG, Max Payload Vertical 5KG.
For detailed programming and control instructions, refer to the documentation provided with your specific servo/stepper motor drives and motion controller.
7. Maintenance
The RXP45 series is designed for low maintenance due to its self-lubricating technology and durable components. However, regular checks are recommended.
- Bolt Inspection: Periodically check and re-tighten all bolts to the specified torque, especially after initial operation.
- Cleanliness: Maintain a clean operating environment to prevent dust and debris from affecting the transmission system.
- Lubrication: The self-lubricating system minimizes manual lubrication needs. However, monitor the oil tank (if present) and replenish as per system requirements.
- Bearing Check: Although industrial-grade bearings are used for longevity, listen for unusual noises during operation which might indicate bearing wear.
8. Troubleshooting
This section provides general guidance for common issues. For complex problems, consult a qualified technician or the manufacturer.
- Module not moving:
- Check power supply to the motor and drive.
- Verify control signals from the motion controller/PLC.
- Ensure all cables (power, encoder) are securely connected.
- Check for any physical obstructions on the linear guide.
- Abnormal noise or vibration:
- Inspect for loose bolts or components.
- Check for foreign objects in the linear guide or belt path.
- Verify proper alignment of connected modules in multi-axis systems.
- Ensure the load is within specified limits.
- Inaccurate positioning:
- Check encoder connections and functionality.
- Verify motor tuning parameters in the drive.
- Ensure the belt is properly tensioned and not slipping.
- Inspect for any wear or damage to the linear guide or bearings.
9. Specifications
The following table outlines the key specifications for the RXP45 series. Note that specific values may vary based on the exact model and configuration.

Image: RXP Series Product Parameters Table.
| Attribute | Value |
|---|---|
| Model Number | RXP45X |
| Guide Width or Diameter | 45mm |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Position Repeatability | ±0.05mm |
| Lead (mm) R/L | 75 |
| Lead (mm) RU/RD/RB | 64 |
| Suggested Speed | 0-1500/s |
| Max Payload Horizontal | 15KG |
| Max Payload Vertical | 5KG |
| Profile Body Width (mm) | 45mm |
| Belt Specifications (mm) | 3M-15 |
| Optional Stroke | 100-6000mm |
| Coupler | 12*14 |
| Sensor | EE-SX674 (NPN/PNP) |
9.1. Motor Specifications (400W Servo)

Image: Matching Servo Motor List.
| Branding | Motor Brands | Motor Torque | Supply Voltage | Servo Motor Model | Drive Model |
|---|---|---|---|---|---|
| YAKOTEC | Y | 1.27N.m | AC220V | AS1MJ-06-0403B-G322Z | P1-AS3-03P04M-Z01 |
| INOVANCE | H | 1.27N.m | AC220V | MS1H4-40B30CB-T331R | SV630PS2R8I |
| Delta | T | 1.27N.m | AC220V | ECM-B3M-C20604RS1 | ASD-B3-0421-L |
10. User Tips
- For multi-axis configurations, ensure precise alignment during installation to prevent binding and ensure smooth operation.
- When ordering, consider providing motor drawings if you plan to use a motor other than the suggested Nema23 or 400W servo motor, especially for 'Excluding Motor' options.
- Leverage the self-lubricating feature by periodically checking the oil tank and ensuring it's adequately filled for prolonged maintenance-free operation.
- If integrating with a custom control system (microcontroller or PLC), ensure compatibility with the EE-SX674 (NPN/PNP) sensors.
11. Warranty and Support
For warranty information, technical support, or inquiries regarding customizable options and 3D models, please contact QRXQ Linear Guide Store directly. Professional technical support is available.